Linked to RGB tape and options behind it are not used
Title: LED strip light 
LED tape has long been used for spot lighting and cato basic lighting. But in addition, you can choose monochrome (single color) different colors, and controllable RGB (blue, green, red) ribbons, which can change the colors of si. One from the manufacturer on the same device as Apeyron.
Containment: 1. RGB technology 2. Izbor on zahranvane (driver) for the tape 3. How to control the rgb frame light on tape 4. Election on the controller for RGB tape 5. Methods for svarzvane 6. Video pregled on remote control kit
RGB technology
Samata scheme and work on a multi-colored ribbon and a characteristic radish.
Differences from conventional tape
Similar to obinovenata, RGB ribbon is a printed scarf under the format of a tight ribbon, encircling the application with a conductive ribbon. For the difference from the standard, nyama 2 are lenti on RGB tape, and 4 or 5 are common and bloom for everything.
Resistor and LED to install on the tape using the SMM method (Surface Mounted Mevice), which varies depending on the type of tape:
- Single color. Those can be with any size and need to bloom.
- RGB. The toy is made from SMD 5050 LEDs. The Tozi diode is made up of three LEDs in a single package. In a monochromatic ribbon, those sa with one and the same bloom, in a multi-colored ribbon, those are different (red, green and blue). Tazi the combination of you allows you to change the colors to the device, or yes, direct the beat. Cherniyat bloom not osiguryava Svetlina.
- RGBW. In addition, color the diodes, install white in the ribbon.Tova vi dava additional control over the brightness and color on the lighter.
In addition to the device, in which all the LEDs from one and the same color are controlled at the same time, and the device is equipped with a diode chip. They use a microcircuit, which allows you to control all the LEDs separately. Tova gave the opportunity for the application on the effect of kato “svetlini for byagane” or “star dzhd”.
Sample RGB tape
Crawl and use
Premotively on the same LED device, the devices of the same for the chimmer for the colors for clarifying, somehow, and according to preliminary, the projection is somehow and organized by the different lights of the ethnia - the pre -trip, Trepten or, the kogato controller km compatrus or muzikalen center, music.
Takiva devices are used on golyamo variety from place:
- when illuminated on display case;
- advertising inscriptions;
- create a romantic atmosphere in the flock;
- lighting in the corridor or in the bedroom - blue light is all included in the evening, and the light was bright in the evening or when a signal from the sensor for movement;
- aquarium lighting.
In addition to these options, the options are also possible and many others. The use of such a device is limited by the imagination of the designer.
Multi-color pandels give meat for design possibilities
Election on tape
One from asking, for some reason tryabva and this dissuade when organizing lighting on LED, which tape and this is used.
Degree on illuminance
In the first place, tryabva and decide in what capacity you can use the LED backlight:
- Decorative lighting. The functionality of the controller is of paramount importance.
- Zone lighting. Tova e additional clarification in the flock. Negovata power e most often from the tazi, a flock is necessary for the tsyalat.
- Lighting for work area. It is difficult to install the necessary power, however, it is usually used together with the main lightening. It is determined through the method for selection or with the help of an online calculator.
- The main clarification on the cyalata flock. The power of this is determined from the area to the flock and its intended purpose - in the bedroom it is 2 W / m2, in the kitchen or children's flock - 3 W / m2, and in the bright flock - 3.5–4.
When it was made on the project, it was ruined on the light in the diffuser or in the basement. Those will reach 50%. Possible option for two-zone and multi-zone clarification.
An example for using zonal clarification. Such a tape is yama and osiguri clarification for a tsyalat flock, but you can often illuminate it often.
LED type
The multi-color tape with LEDs is installed on SMD5050 crystals with a size of 5 * 5 mm, consisting of three diodes and 6 pins. In a single-color ribbon, those sa ssssya are blooming, and in an RGB ribbon, those sa are different (red, green, blue). Rolka from takava tape e length 5 meters and 144 watts.
In addition to the conventional diode and chip, WS2812B and WS2812S. Externally, they are similar to ordinary ones, but they will use a PWM controller, which allows you to control all the LEDs separately. Those realizirat different effects cato "light for byagane" or "star rain". From this device you can mount the LED screen. Lack of high price and the need for a special controller.
Density on diode
The brightness and price of a single LED strip does not depend on the size and type of diode. Density on crystallite is not a small value. In RGB, the tape is heavy 30-60 br / m. For brightness, two, three or four reds with a density of 120, 180, 240 br / m are used.
Blossom on ribbon
The color on the RGB tape is controlled by the brightness on the LED in different colors. Ako the diode will turn on all of a sudden, the ribbon was bright light. Painted on the brightness for one or two colors, exchanging the general color for the ribbon. Tova stav with the help of the controller.
Control and allow you to adjust the brightness and color of the ribbon
RGB LED strip + RGBW was a two-way led-tape, in some cases it is directed from the color of the LED, and the other is from the white of the LED. Tova gave the opportunity for receiving on pastel colors, somehow the brightness was increased under normal conditions for clarification.
Degree on IP protection
Arguing against external protection, the device conditions are divided from non-protection (ip20, ip33) to partially protected (ip42, ip44) and sealed (ip67, ip68).
Save with RGB tape
Nay-frequency voltage for these devices e 12-24V. Ima devices store from 110 and dory 220V, but those are not widely used.
Izbor on zahranvane (driver) for the tape
Protect the block behind the LED strip by selecting a certain amount of power for the device, which will still be connected to it. For example, ako sa svyarzani 5 meters from 14.4 W / m and 3 meters from 7.2 W / m, togawa generally natovarvane e 14.4 * 5 + 7.2 * 3 = 93.6 W. Kato sema foreseen 20% margin (93.6 + 0.2×93.6 =112,32), power on ureda trebva yes bjde nai-small 112.32 W.
Like on a tape, it will store dc12-24v, such as 110v.
How to control the rgb frame light on tape
For yes, control the brightness on a single-color tape, you don’t need a dimer, but you don’t need a controller, so you get the most out of multi-color devices.On the contrary, the case is more shaky and regular, all bloom separately and brighten the effect of yama and sa cash.
RGB ribbon kit controller back kjm sdzharzhanieto ↑
Election on the controller for RGB tape
The choice of a control device depends on three factors:
- Power Calculating all the beginnings of the need to protect the block - from the general broy connection of the device. Obviously, when choosing to save the block, it’s imperative that you buy not only a powerful RGB controller, but a low power and RGB repeater.
- Desires set from function. There are many types of devices for control, but for example, a device with a golam broy lighting effect is not necessary for lighting a product in a showcase or aquarium, but a timer or music light is desirable for additional lighting on the flocks.
- remotely. Just like when you are elected to a function, it’s definitely necessary, but in other situations it’s a ruin on a bet.
When choosing these points, all the foresight will be taken, the task is not to buy a solid device and in a short time, you can suffice it.
Species Controller
Ima various types of controllers for controlling RGB LED strips: from simple, with a bud, to equipped with a microprocessor and Wi-Fi.
Conventional devices can and choose self-defined colors and can achieve uncomplicated light effects. I crawled out for lighting on shop windows and other places.
More complex models can and can be programmed for blooming and timer efficiency. They can and have a connector for a flash memory and yes react to light in flocks and openly. IMA and Bluetooth controllers can respond to remote control.
Nai-complex devices can and can be connected to a systemat for an intelligent home.
Povecheto lenti imat remote control. Cases:
- top butoni;
- infracherven;
- top radio signals;
- bluetooth control;
- WiFi control
The last two can replace the iPhone or Android mobile phone.
You can control the tape with the help of your smartphone
In addition to this, conventional controllers, and home cooking devices, are based on the Arduino microprocessor board. Such home-cooked products are controlled simply by LEDs or based on a chip, provide lighting or color-musical effects. Sensory for movement or lightness is connected to the Arduino controller.
Modes on the RGB Controller
Ima two kinds of leds in ribbon:
- Forgive me, which is controlled through a promyana for protecting the voltage at the same time for a long time;
- bazirani on the chip, with digital control for colors on all the diode separately.
In response, the controllers work in two modes - analogues and digital. There are different types of devices and they are not interchangeable.
Methods for svarzvane
There are two possibilities for linking to RGB tape:
- soldered;
- connectors.
Vrazka for drinking
For yes, drink the cable kjm LED tape, trebva:
- The cross section on the conductor is up to 0.5 mm2. Po-debeliyat may yes otksne podknite.
- Poyalnik up to 25 watts. The pommel is more powerful than the zonate for soldering and the substrate is still unstick from the foundation.
- Solder and neutral flux.
- We twist pipes with a length of 30 mm.
RGB connectors for LED strips
Time to start on the connection of the connectors. The product itself is a small plastic device, in which there is a contact substrate for fixing the ribbon tape. Technician broi trebva and answers to the broi on the conductive tape 2, 4 or 5.
These devices are offered for various connection options:
- with exhaustion, for protection;
- linking, destination for linking into two sections from the tape;
- glova, for svarzvane under ugl;
- T-shaped or cross-shaped.
And many others. Izpolzvayki connect, you can fix the device yourself.
Connected kjm RGB controller according to the nominal power
Either control the LEDs with power by setting the parameters on the controller, or link the devices, positioning them at a distance, all using an RGB repeater.
Signal from it and two cables from the controller and the device that controls the radiance, then connect the segments to the tape.
Video pregled on remote control kit
PreviousLED strip is bright How can you cut LED strip and avoid sinsNextLED strip is bright How do you know when choosing a LED strip and how can I vomit