Options for crafting on polylays "Direct yourself".

Title: Polyleia

The store will offer a huge din from the body lighting for every flock. But pouring "send it yourself" for the kitchen or a friend of the flock still turns into a truly exceptional option for home decor. You can’t but intend a friend like this, but the samiyat process has conveyed pleasure.

containment: 1. Materials and safety 2. Selection for lamp and contact 3. exit

Materials and safety

In the process of working at the top, a particular model of home watering machines is more often used for cutting materials, which means that the total price of the device is sometimes minimal, but the exclusivity of the product is still maximal. Once you select the material, shake and pick up the foresight, follow the points:

Tryabva is not ignited. All packs are due to the use of an electrical device and there is a fire hazard.
Determine what type of lamp you are using. Such a fluorescent and LED source practically does not heat up, but lamp with a hot plug and halogen lamps - on the contrary.
Possibility for use. Struva si yes remember that it’s not possible to blame and send a homemade product from the first place, material tryabva yes be chosen such that it will hurt the mind and not the problems.
Thy kato pour now from crawling into the kitchen, material on the lampshade and lampshade trebva yes clean the forest, and elements on the lampata trebva yes they will dump it.
Home-made watering can not be pumped from an electrical cable, ringing and easy. For okachvane, use chains, special ropes (meks or tvardi).

It is better to prepare polyleys at home and direct them under the format to a single lampshade or the lampshade is closed. Therefore, do not tryabva and read on the solid a lot of bright stream.Such a light source is definitely not a central element in the kitchen and it will attract attention, but it will not be superfluous for a lady to use additional lights from the light.

Polilei from Rende At home, prepare polyleys that are a little light, despite what they can and will be a lot of thematic.

From the end

Tozi material, which is worth it, or you can even buy a lot of it, help us and create an original lek of polyley. If you choose white niches, then they will pour out the forest, and if there is a boyadisan, they will all bloom. The size of a polylea can be anything, depending on your desire. The exterior view of the product is not simple, but for some reason it is allowed to fit into the interior of any kitchen, but at the same time it is original.

Important! Based on lampata e conci; you can use debel pamuk, but not even.

In the work you are trying: end, PVA molded, rosary, round balloon with the required size. Red for congratulations:

Inflate the balloon, draw a circle in the base.
Take out the mold in a container, in some other place it is convenient and drown the nishkite.
Wipe out the top of the topkat, first get drunk with a sculpt, in a chaotic manner, the edges of the region on the circle, some more painted in the first step. For yes, simplify the process, you can break through the butylkata from the sculpted close to the bottom and yes, I will string it there. Such a heavy bjde is evenly wet with sculpted.
Once again, it’s wrapped up adventurously, trampling the tremble and being pumped and nishkite and be dried up. Depending on the size and layer on the wrapping, it may take about 24 to 48 hours.
Whenever the lampshade is blown out of the blue, it’s annoying to get rid of the topkat, which I’ve exhausted before.
Leave alone and choose the size for the cassette and let you wire the stone.

Watering from a niche Mortar after mortar production on polyley from a niche

Using algorithms, you can create original openwork polyleys. The base material is used to prepare weaving napkins. It swelled in 10 minutes, and a trace of something zalepvat for topkat. Dry for a long time, about 3-4 days. It is similar to a watering can and can be directed from a single round napkin or from a separate element with any shape. The second version of the look is much original.

Directed from darvo

Such polyleys are exclusively made for creation, but their appearance is extremely non-standard. It is not suitable for any interior. It is possible to fit everything into the kitchen, decorated in rustic style, in oriental style without any problem. Kitchen tryabva yes golyama, ty kato nyama yes work and catch the beauty on tosi pour in the kitchen.

In the process, you can use some kind of massive rake, such as vines and dori bamboo and prachki. Options for homemade darven polyley:

You will dump 2 wires under the format on the cross and put the cartridges on top of the tyah. Tova e nay-lesniyat option for performing, dory without special skills for working with darvo.
One old darvenno it was prickly and two in a comfortable way. Ako se intend takawa rowkost, togawa polyley can be made a lot of original. Koleloto tryabva yes bade shlaifano, lakirano or boyadisano and tryabva yes bdat attach suitable sennitsy, patronite tryabva yes bdat montirani.
Tavanna lamp, crafted from raw clone. A lot of modern variant, sometimes you can add all kinds of eco-interior. The algorithm for working in the tosy case e is similar to the process of creating a polyline from a niche. First of all, not se naviva top baseball, but se zalepvat kloni. Tova tryabva yes, direct it like that, it’s all a new clone and ima the reference point at the top of the topkat and at the top of the veche close up.
Another option from clone. Trsya tanks, different lengths.Hollows are pierced in the tyahs, prez koito minava telta, with the help of negativity, the base was fixed in a twisted way. A cassette is installed in the center.

Darven polyley Original pour from clone for country style

Important! Vsichki darveni elementi, beat that clone or darven material, tryabva yes bdat lakirani or boyadisani before or a trace was sent to polyley.

From glassy burkani

Takiva polylei imat is original and absolutely safe. The glass is heat-resistant, such a lampi with a hot flask can be used in such a polyley. For work, you need to burkani with screws capacci. Algorithm for making a step by step:

Point the dupka at the kapak, some of it is suitable for a cartridge, some of it has crawled out.
Put the cartridge from the pin in the opening and curl the hood.
Screw it.

For such a lamp, tryabva and osigure the okachvane, maybe yes there is a chain or a rope. Poliley, created according to Tosi algorithms, maybe yes:

With one canopy. Takiva model sa arrangement on tavana in quantity from slightly parquet.
With a little nuance. Darvena daska or shperplat acts as a basis for tyahnoto fixirane. Those people can and can put them in a “package”, something else looking even more extraordinary.
Stakloto se decorira forest. In the process, you can use: canap, special heat-resistant, decorative, fighting. The last option is to help you and create an imitation on glassopis.

Option for home polyley Simplicity and originality - pour for canning

Izpolvayki is similar to algorithms, you can send polyley from:

Glass bottles. With tyah patronyt se izstrelva prez garloto, fixing the element e cortical tapa. Dnoto tryabva and lo and behold, remove the plume, so you work and don’t be sharp.
Decantery. The process is similar to the previous one.
Bowls and chiniyki, chinii. Behind the kitchen, it is thematically polyley and a true find.Do not take away ceramic bowls of sufficiency, so try and make a suitable base and fix the samiya kam tavan poliley.
Vilici, lie. In drzhkata, they pierce the hollows, they pierce the bodies, which is attached along the perimeter of the darven right or square prachka from the darvo. Cassette self montirani in the center on the construct.
Gevgir, tenjeri, rendeta, metalni buy and generally all sorts of kitchen appliances, which you can’t use.

From boards

Textile material is convenient, from which it is possible and all to create original and complex polyleys. The procedure for applying for a lampshade from payments for polyurethane is approximately stated, specifically:

Imate need from the base. Maybe even an old lampshade, any object with a suitable shape. Ako is the foundation of e metal, togava cha tryabva and be checked for petna from ryzhda. Ako sa, clean your togawa. Ako tova is not directed, it cannot be imprinted on the top of the tkanta, but it should be premachated or boyadisan.
Direct it sculpted. Praht tryabva yes, here and there, sparse instructions, when you sculpt a pilot, it’s ready for potapyan on a cloth in it, leave it in 10 minutes.
Get rid of the cloth and I will put the foundation on top. It is imperative to send the shanks along the surface, so the texture for the preparation of the product is even more original.
Leave it dry and dry at a high temperature. Depending on the density of the material, it may take 1-5 days.
The next mortar is not colored. Ako ima has a lot of gunk, then it’s more uncomfortable and boyadisate with a rosary, kinder and use the gba. Apply as little layer as needed.
Leave alone and make your wishes decor. In the process, they can and do use it: blooming flowers, leaves, clones, pandels, crystals, sparks.It’s basically something, but don’t overdo it, but in the kitchen, it’s decorative, it’s useless.

Poliley from boards Platen polyley may be so

Important! Takiva polyleya gives a little light, ty kato lampshade them all the way. It’s convenient to put the zonate at the top for storage, for another help, and this is the outline of the tazi zone. Additional clarification is not necessary.

Worked out on polyleys from boards can be a lot in the forest. To help you come, prepare frames for lampshades, curtains, wraps from technium metal. Packed by them from the boards is not difficult from packed for a gift. With the help of the drug, it is still possible to create an original effect and diffusion on light.

From m'nist or m'nist

You can make a beautiful watering from the obiknoveni darveni manista or manista. Porchka:

Prepare the frame from metal or other material. In this case, you can dory and use the frame from an old lampshade. The state of this is of no importance, ty kato se proving forest for decoration.
M'nist or m'nist is now on the vditsa or pay a healthy niche. If you use a manista, then it’s kinder to take multi-colored and various shapes, so the lampshade is more interesting.
Stay and fix the nishite top of the base and attach the cartridge. End this fixation with opn or ss freely sagging, depending on the idea.

Takiva polylei make a lot of originals, which imitate golyam crystals from the minalia of the eyelids. Takiva polylei sa rocking, kato tying an element from the tavana se from the rope.

Poliley from m'ista Polyley from the manist to the interior

From plastic bottles

A lot of plastic bottles have been broken, and they can and do use a lot of useful things.

Prviyat variant e tkane. In butylkata, cut off the garloto and dnoto, cut the medium into tanki ivitsi.Kolkoto is more colorful on butylkit, sensible in a good way, they have already bloomed. Now it’s all based on a metal frame, with a janti, for a piece of wood or plastic parquet, and yes I fix it. Osventov's process is creative - the fabric of the disputed principle on the creation of a fence from whips. Tryabva and pay for it, such a lampshade and spare the C format.

The second option e is decorative polyley. Red for congratulations:

Prepare a bottle kit from the beginning, like in the predish version.
Cut the leaf, blooming or any kind of geometric shapes with different sizes.
Finish the edges with a soldering iron, such that they will cut them off easily. You can draw ivitsi, for yes, look at it naturally.
Direct the slope from the copper of the bodies, fix the sheet at the top of it.
Fix the slope of the frame.
Svetlinata from krushkat still shine prez listata, for yes, the effect is interesting.

Plastics Polyley The process for processing on pouring from a plastic bottle

The third option: from a plastic bottle and a spoon for a single use. The need for the process is from: a plastic bottle from 5 liters, a spoon for a single use, a pistol for a mold. Process at the meeting:

Cut off the bottom on the butylkata.
Cut it off on a lie, you need the “little ones” itself.
Apply sculpted butylkat on the top and spit on the redove on the lies, the soils from the dnoto. Lies, they will put the country navn from out of knalata.

The result is so luspest polyleys. Maybe yes bde boyadisan or left in the pool.

From the barbeque

The original country style watering can be made from a barbeque darling. In addition to kam tyah shchi vy tryabva sculpted and organza ribbon. What form direct the polyley you can choose for yourself. Nay-prostiyat variant e is square, kogato shishchetata sa gnati kato "kashta". Fix every prachka with a sculpt.As an alternative, you can send a star, a hexagon or a different form.

In the process, it is important to skip and lie on the same top of the other, otherwise the case is more or less careless. Size for design can be with any size. The trace of the kato lepiloto is dry, you can decorate the polyley with a ribbon. Proviva se prez jump to every suitable place. Prejudicially e darvenata construction and se lakira or boyadisa otgore.

Darven polyley Ready to pour from d'arveni prachka for barbecue

From laser disk

From tosi, the material will now turn out to be more original, with a lively light effect. Maybe yes, it is directed under the format on the firebox, on the principle of kato with a finite layer. Another option is to cut the small pieces of the elements and string them on the end, which is fixing the top of the frame.

The diskette is comfortable and elegant because of the use of material, so you can turn it on in the image of the situation and, moreover, it will turn out that you will create an original element on the decor.

From cardboard, charter

It’s sharp and even strange, but dory and takiva material can send a lot of beautiful and original pours. Nay-lesno send it from the cardboard, for tova vi tryabva:

Choose a suitable template. The outlines on the polylith in a classical style look beautiful. Direct 2 single parts from it, cut it like that, che cogato sa svyarzani, they create a three-dimensional structure.
Boyade the cardboard as needed.
Take off the parts, underwire from the bodies or the end. For yes, send the tov, first send the hollows.
Okachva behold on the chains, despise him behold the procarva cord. Cassetata e fixed at a distance.

Using algorithms, it is still possible to send pouring from plastic or hardboard. Takiva materiali sa a lot of health and wellness. In addition, working on a water heater in the kitchen is more convenient.Element on the polyley more trembling and beating from the mosaic.

Maystorski class for joining charter polyley:

Iziskva is the basis, it can be old watering for tavan, circle from shperplat or darvo.
Cut the pepperwood from the plate byala charter. In this case, it is convenient to use a template from cardboard. When preparing the product, look at different sizes and look at the original.
The same fixer peperudi at the top of the plate was a niche or vditsa. It’s convenient to send the tov with the mold, you can put it on the prez 2 hollows on the detail.
Fasten the nishkite from the front of the frame. Osventova theses niches can and can be with different lengths, somehow creating an effect on movement.
If you wish, it can be polyleyat and be additionally decorated with manista, crystals, separating the peppery can and be boyadisani.

Hartien Poliley Charteri polylei: options

Hello! You can cut it, don’t make it difficult to pepper, but krgove, they don’t look good.

back kjm sdzharzhanieto ↑

Selection for lamp and contact

When working on polyurethane, it is important that you use suitable electrical materials. Parviyat is the main element of e casetate. In any case, you need it from this, in some cases I’m sorry for fixing the lampshade.

For some models, a suitable cartridge is suitable, which is securely fastened to the base with two self-tapping screws. Maybe yes, this is a fixer at the top of every surface. What does it have to do with the view of the cassette in relation to the size on the basis of it, it’s better to use the standard ones. Comrade is a big problem with a lot of non-standard krushki.

In relation to the krushkat, it’s kinder and don’t use the krushka from the junkyard, they heat up a lot and consume a lot of electricity.LED and luminescent products are the optimal solution both in terms of performance and in terms of economics.