How do you pump the polyley and how do you fix it

Title: Polyleia

Mounted and connected to the body lighting is the last step from the repair to the room. The lightening is centrally poured, something else can be done in almost any flock. How do you put the polyley on the tavan and how do you direct it correctly?

Containment: 1. Security Engineering 2. Tools and materials 3. General procedure for installation 4. Methods for installation 5. Polite by porchka 6. Fix polyleys in difficult situations 7. exit

Technology for safety

Electrical work is dangerous, if you open the cables, they can be harmful for your health. It is important that they remove all dangers before starting work. rules:

1. It is necessary to eat all the perverted work of the day, when the light is quite natural.
2. Prepare the necessary tools, but do not scatter them in the process to kill them.
3. First, destroy the installation, remove the cables stored on these cables, work with something else.
4. Check the voltage on the cable, which is licked from the tavan with neon indicator. If the light is not brighter on him, then it’s all over, it’s allowed to eat it and keep it tied up.
5. Nay-good, yes, wire the cable with the help of a terminal block.
6. Izskva is all grounded.
7. Next, buy new polyles, shake it up and make sure that you screw the screws in the socket and on the block you fasten the good. Lose the contacts and the wines will burn out more.

Clamp the block for polylays - a convenient option for tying back kjm sdzharzhanieto ↑

Tools and materials

Before you start, install it yourself, tryabva, and prepare the instrumentation, tryabva:

• Electric tool: drill or chuk.Depending on the type of surface, choose a drill for concrete, wood, metal.
• Stulba / mass / table. Osvent tova is undesirable and here is the “pyramid”.
• Screwdriver or screwdriver, for preference, is lifeless, it is convenient to work with it.
• indicator screwdriver.
• Ticks with isolated drags.
• Tweezers.

The process of researching materials, depending on the choice of method on the installation:

1. Self-tapping screws with dowels to fasten the elements to place on top of the concrete surface. For darva - ako for darva.
2. Zakopchalka: Izpolzva se kuka or kotva.
3. Twist the substrates. Ponyakoga those idvat in the complete set, but for the spy of the device. Ako those are not there, togava tryabva and buy it.

back kjm sdzharzhanieto ↑

General procedure for installation

Ima have a lot of options for fixing on the polylay, but they differ by themselves in relation to the installed on the fastening element (cookie, tape). The general procedure for installing on all polys:

• Dismantling on Star Polyley.
• Installation on fasteners elements for polyley.
• Connecting the conductors, try the first and second calls, and then determine the fazate and nulata. Somehow I remember, we work from the exception. It’s convenient, because in terms of time for the process, an assistant is nearby, someone can hold a polyley, so it’s not a bad thing. Ako yama helper, togawa polyleyat can be occupied at a convenient distance from the tavan with the help of a sensible way.
• Trace tov conduct sa svyarzani. For goods it is convenient and use the substrate. In any product, there are special connectors, just a ripple and put a cable, which is licked from the tavan, and then fasten the chatter to the connector.
• Ako do not use the connectors and substrates, togava all the perversions of usukvane and put it in lieu of the isolate. In this case, you can use TUK (heat-sealed pipe) or electrical tape.
• The last step is to download the polyley and check the work.

back kjm sdzharzhanieto ↑

Methods for installation

We have different methods for installation, choosing one or the other depending on the material for tavana (gypsum board, concrete, wood), tegloto for polyurethane and fastening elements present in the uneven structure.

For tezi, which is not a tag, it is suitable for mounting from a cookie. Ako tegloto e more than 5 kg, then the necessary kotvi. In some cases, tryabva and fix the polyley with the help of the tape. There is an option to mount the polyley directly to the tavana, without intervening fasteners.

Fixirane on cookie

All in all, you can start by pouring all the water on the tavana, just tryabva and choose the right cookie.

Montirana on a cuckoo for a montirana on a polylea

Options:

1. For the leki of the device (up to 5 kg) - usually a metal cookie with a thread. Ako tavane is concrete, then a plastic dowel with a suitable size is needed.
2. For tags (over 5 kg) - bolt anchors with a diameter of 10 sq. mm and spacer elements, which will also prevent damage to the polyley, the tavana is fixed.

Important! Tozi method is not suitable for polyleys, in which a decorative coupa is foreseen - a crooked mount of elements.

Procedure for montirane on polyley on kuka kjm betonen tavan:

• Direct the dupka with the necessary diameter.
• Chuck in plastic dowel.
• Curl the fastener cookie.
• Tie the cable and close the element on the cable rack with decorative glass.

Ako installation of se izvurshva varhu darven tavan, here everything is still in the forest - kukata is a screw in darvoto. Ako e a lot of tvard, first tryabva and break through the opening, the diameter of the e is small from the diameter of the kukat.

Important! Decorative kitchen kupa (chinia, d'arzhach for bowls) now move freely along the high ground and follow the adventure on the slope, maybe in the forest and fix it in the mountainous position.

Fixing with the help of a bracket or a strap

If you design on a device that doesn't include a cookie code, it's a no-brainer option. Tryabva and use a bracket or rail. This option is a little more complicated, but still available for execution from any home maistor.

Smyana na kuka with schang

Polyleyat wines and dva with schang or staple. Put 2 screws in the Tozi element and fix it. Before you fasten the nuts, set the required distance. Determining all the base on the set on open the top of the plot on the polyley. The trace of the screw thread will be bolted with a decorative fastener nut. Attach the samata tape to the tavan with a screw for self-tightening and flat.

Sequence for mounting on boards

The next thing to leave is to put the polyley on the right place and then fix it with these decorative nuts.

Simplified option for installation

Ako polyleyat e lek, not more than 3 kg and small in size, togava that can be attached just to the tavana, without intermediary hardware. Takiva products are distinguished by the tov, which is the basis of the metal plane, most round from the montage open. The process is simple:

1. Attach a patch of kam tavana and mark the dupkite with prayers.
2. Hit the right spots.
3. Put the flat on the tavan and fasten it with a self-tapping screw.
4. Fix the plafond.

Takiva, forgive the polyleys, basically imat the very same nuance for 1 lamp, they are used for small rooms. Chesto kacheni in the kitchen, banyata, corridor.

Polilei with fixed kjm tavana back kjm sdzharzhanieto ↑

Polite by porchka

Polyleys with remote control sa introduction and gain popularity in the market.This device allows you to control the intensity of the light. Other models will place the CC system behind the ionization on the air, fans. Don’t think that what is installed on such a device will turn out to be a problem, just try and take some foresight:

• Whenever you choose, pay attention to the methods for installing and connecting. If you trace the trail to the device, then you will open other conductors, open the standard, try and consult with the seller for a specific purpose and the circuit is connected.
• Ako really ste haresali polyley, but it turned out to be difficult to install it on your own, wines can be used to service an electrician.

back kjm sdzharzhanieto ↑

Fix polyleys in difficult situations

These options are suitable for installation on polylays, provided that they are sufficiently flat: concrete or wood. But modern tavani can be different: opnati, drywall. And understand other difficulties in the process, you know how and how to get out of such a situation. Basically, yes, you need tools and materials in the arsenal.

First difficulty: nisk tavan

In this case, the difficulty of dory on the stage on the tarsen will rise to a suitable model. Nay-lesniyat start and buy polyley for tavan and go montirate top double cross-shaped ribbon. But if so, the model is not dissuaded from the style, you can and intend to get out.

Suitable watering for tavani's bows

Dory watering with prut can and all montira without crawling on the cookie. Tova sche to sleep up to 15 cm tall. Procedure:

1. Cut off the standard tape, so that you can’t put a trace on a decorative cap, even if it’s completely hidden under it.
2. Get rid of all the pieces of cracked elements from the device, remove the right, as much as possible.
3. Remove the conductor from the terminal block.
4. Punch 3 holes in the butt of the rezbat along the protégé on the right. All the same, with a diameter of 4-5 mm. Vsichki those tryabva yes bdat cover with a hood.
5. Cut the thread in the dupkit, curl it with a wire and I curl it flat with the tape.
6. Place the trail of the cat on the ground, carefully move the zhidzite along it, which will cut it out. Tova tryabva and direct this, dokato guide this, they will appear from the dupkite.
7. Leave alone and wire the conductor to the terminal block.
8. A trace of the action of the sling is still placed between the two nuts, leaving it alone and fix the shinata and wire it.

Important! For yes, you will avoid treptine on the light, in a good way, yes, do not use the "usukvane" on the cables. Struva si and all resorted to soldering and isolation from the usual electrical tape.

Second difficulty: drywall tavan

Tova e nai is very difficult, but it is quite enough to level the tavana with drywall, but it’s more difficult and difficult to install the polyleys. Tozi material is not designed and costly in NATO (including Tavana, that is, in the same way from tozi on the stenat) dori from lek polyley, for some reason, attaching directly to the sheet.

When fixing on a sheet of drywall, a tavan is rolled in, tryabva and markrate place, somehow preminate the profile, it’s exactly in ty that every device is securely fixed. Another option is to fix the schanga kam tavana on the site for installation. You tryabva yes be with such a debelina, so that the distance between the sheet and the rudeness of the tavans is covered, sort it out, this meaty trebva and be whiter.

But if it’s not directed, then send the hollow into the sheet in such a way that you reach it to the point of rudeness: concrete or darven tavan.Posochenite on-mountain installation measurements veche ce perverted there.

Difficulty tretata: opynat tavan

Do not blame, if you install it for free, own it and use searchlights, which, with the help of a special device, will be installed for installation in such a surface. As far as the polylay is concerned, please think about how it is installed elsewhere, before installing it for a fee, which is necessary and put a special platform from the shperplate and metal plates under it. For yes, send the goods, try and decide the location, the size of the fastener elements, the view of the installation.

Mounting on sectional polyley kjm opnat tavan

Ako lentata e fixirana, togawa you can and download the polyley at the top of it in every way. In this case, it is necessary to se planir prazninata, for example, foresee the fact, for a fee, "go". But in spite of Comrade, it’s good not to experiment with Comrades yourself, and yes, please serve to the experts in opnati tavani. Tazi price is determined to be more than just from damage to the new paid and responsibly negovat installation.

In such a polyley, they can’t even use a lamp from a lit lamp, because the temperature is so hot that it negatively affects the state of the payment, which is still possible for a little more than a month.

Difficulty 4: no cookie on tavana

The whole thing is not a problem, it’s screwed onto a kukat, it’s not a problem, more work is added. Option for tova how to do it in case of a concrete or darven surface sa socheni in a mountain.

Petata Difficulty: installation in the old house

In such a way, cable sa aluminumievi, they are squeamish and rather uncomfortable for boraven. kasa. Contrary to Che Nay, a good decision, yes, change the cable from Comrade, for some reason I crawled into the new fence.

Ako kashtata e panelna, togava can and will face difficulties. Panel imat kitchens in the morning, gee whackers, you can fall prez tavana, but they’ll pour it out. In this case, tryabva and try the place on the svyarzvane on the platform.

back kjm sdzharzhanieto ↑

exit

Mounting "direct it yourself" is not difficult, but you know, you know, all the subtleties of working from various designs on polyleys and tavans. Nasarchava is minimal experience in repair activities. In this case, the trace was received on theoretical information and looked at the video clip, in any case, get out for the best possible beginning.

PreviousPolyleysNextPolyleys How to independently upload polyleys to drywall tavan