How to wire polyley with remote control

Title: Polyleia

Clarification is one of the main systems in the room, for the sake of not decorating the site itself, but also making it easy to work at any time. Medium wide din from lamps and all kinds of special attention to the polyurethane on the control panel. This is a technically predictable device, but don't be afraid to buy it. All the same, someone read the tazi article, you can also install it in the si apartment and send the rubbish repair to the lampat. Somehow and razgledame connected to polyley with remote control and from whatever it is.

Containment: 1. Device 2. Svarzvane kam mrehata 3. Typical malfunctions and tyahnoto removed 4. Conclusion

Device

Every illuminating thing was drawn from three parts:

• frame;
• cartridge (1 or more);
• plafond (1 or more).

The electrical part of the conventional lighting body is composed of protecting the conductor, tying it to the nest, in some way mounting the crank. Tova e founded, some left unchanged. In this case, the voltage is stored and the current can be seen to be different depending on the type of lamp mounting.

Intelligent polylays and polylays with remote control are distinguished by the addition of a receiver for a signal from a remote control and a device for turning on (turning on) a lamp. Depending on the complexity of the lamp, they can not turn on and off by themselves, but for example, they have the ability to smoothly regulate the brightness.

Polyleyat can yes se montira:

• halogen lamps save voltage 12 V;
• lamps for 220 V from any type (as in the instructions, there are no specific reservations);
• LED covers with constant current or separate LEDs or plugged in;
• It is possible to use RGB chips for decorative lighting or light music.

Ako lampata itself is switched on and off by light, togava se from the radio-controlled relay of kutiya. Once the stepless adjustment is achieved, then the adjustment of the variable voltage controller or the PWM controller of the DC voltage controller is achieved.

And so, the most electrical part of the polyline on the control panel is from:

• Receiver for control signals. Depending on the model, it can work in the infrared band, at a radio frequency, for example 433 MHz, via Wi-Fi or Bluetooth, but in this case it is also possible to control everything from a smartphone.
• Switching device. A device that is somehow controlled by a transmitter by turning on a lamp or a group of lamps. The conventional device is structurally integrated with the receiver.
• Groups from the svetlina.
• Some use low voltage halogen lamps, LED lamps or LED modules, togawa electronic transformers, 12V storage and vodsch chauffeur reciprocally.

Radio relay in English is called Wireless Switch. For yes, intend tosi detail in a tyaloto on a polylea - the poster is similar to the inscription on the top of the corpus on the block.

Scheme

There is a typical lifeless chain on polyley.

An illustration showing a diagram for a polylay from 220 V with a lamp - this is a good option. Tuk yama dollars and storage or converters.

The tasi diagram shows clearly connected to a remote module for 4 groups of lamps.

You will run as if you are getting into it:

• 2 conductors behind the connection to the mrezhat;
• 5 conductors for the connection of goods (depend on the armor on the group, they throw on the conductor from 1 guard from the armor on the group - the commodity is zero);
• 1 conductor, which is not related to anything, is an antenna, it was common, but it can even be different.

The zero conductor is not badly crossed. Those sa two, united for svyarzvane kam mrezhata, others for svyarzvane kam of goods, they can exchange it, get drunk at one point on a scarf.

Examined, the diagram on the link is drawn on the tyaloto:

Vtre in takv module ima duska:

Blue elements of the relay. Tova sa including elements, they will deliver voltage to the goods. Te imat 12 V bobbin, for tyahnoto protection, a transformerless circuit with a tempering capacitor is introduced.

Here is the second diagram:

The product is equipped with low voltage halogen lamps and LED illumination. One from nai-chesto cross options. In the middle part of the verigata for the protection of the sa installirani (otgore nadol):

• Stored for LEDs (Led transformer) successively.
• 2 electronic transformers 12 V for halogen lamps (Electronic Converter), connected to 5 lamps of 12 V each, and to the secondary - 4. These lamps are connected in a group stubbornly.

Protect behind LED tape back kjm sdzharzhanieto ↑

Svarzvane kam mrehata

After purchasing new waterings from the control panel, it’s worth it to the veriga veche sgloben. You can check the correctness on the vrzkite on the verigata, and yes, you can assure yourself of a bona fide sglobyavan from a friend from China, according to the information described above. Ako ima lock the block, don’t take it and check it, let the screw sa fasten it. You can see the tazi picture

Ako everything is harmless and well connected, togava just tryabva yes you can save the conductors (phase and zero):

1. Dismantle the old watering.
2. Prepare the conductor for the installation, strip the gi.
3. Get the wire from the new polys, for the goods it is convenient and use the clamps of the Vago block or the NSHVI ends, but do not take away the insulation.

back kjm sdzharzhanieto ↑

Typical malfunctions and tyahnoto removed

Ako lampata is generally not reacting, first tryabva and check if the batteries were remotely exhausted. Ako vsichko e nared, shaking and skip the lampat. Next, check the radio relay.

Radio relay ima 2 protect the conductor - phase and zero and a little from the conductor's source, throw them depending on the break on turn on the group. Ako polylayat ima three groups of lamps plus LED backlight, togawa radio relay ima 4 phase conductors and a common zero. In response, all the same, pour over the relay for the needs of the broy group.

Ako do not learn much from the electronics, nay - a lot, you can send something, and check the voltage at the entrance to the device. If there is a voltage at the input, check if there is a voltage at the output by the terminal on the control group and the trace on the button on the control panel. Tova can be directed with a multiset or an ordinary indicator screwdriver.

How to fix the reaction to the signal on the control panel and on the outgoing conductors on the relay, voltage appears, then there is a problem in the circuit breaker or the storage technique.

Please, pay attention that this relay device is protected from 220 V voltage, if this voltage appears and at the output of the conductor, be careful.

The storage lights will damage a lot at the same time, usually there is a single reaction from a single group of lamps. Trace tov tryabva and figure out how the type of lamp is used, but intend to store it and replace it. Aco ste good with electronics, you can, yes, experiment, and I will correct it.Nay, it’s just something, you can send something, yes, check it, they gave a proposal to protect a scarf of work.

Be careful, when purchasing backup storage, as well as installing halogen lamps, then when purchasing a transformer for a transformer, take a decision for the original characteristics. Ordinarily, those are indicated on kutiyata, but yama marking - see how the voltage of self-installation is broken, what is the power and sharp parts of the sa in the group, usually the name of the electronic transformers with characteristics:

• Input voltage - 220 V.
• The initial voltage is 12V.
• Power 100-200 watts.

It’s also important for the storage of the LEDs - the elector is crushed, similarly to the pre-installation.

back kjm sdzharzhanieto ↑

Conclusion

Polite with remote control e forest for work, and blockade vtreshna veriga go rule forest for repairs. Usually the design is typical - not a big group of lamps for lighting and decorative lighting on LEDs. Mounting on polys in any case is not distinguishable from ordinary lamps.

PredishnaPolileiRules for the election of polyleys for the niski tavaniNextAsk an expert How to correctly and twist the key with two buds