As a rule, yes, miss the lamps or polyleys from opyat tavan

Title: lampi, applici

Spotlight sa nai - conveniently illuminate the body for opnati tawani. Those sa are compact, economical and osigurevat enough light. But it’s understandable that those tryabva and be replaced, for example, in case of damage. In Tozi, the case has risen to the question: how can you miss the lampat from the tavan?

Containment: 1. Cause for a change on the lighting equipment 2. preparatory work 3. The dismantling process 4. Potential problems with razglobyavaneto 5. Video for dismantling on spotlights 6. Dismantled on polyley 7. exit

Cause for a change on the lighting equipment

First of all, you know something, yes, you don’t point it yourself, but other types of lamps and polyleys use it to open up and tavani from drywall. Premahvaneto them e-forest, otkolko vgrazhdaneto them, but trebva let it be clear from the process.

Cases that tryabva and dismantle:

1. Failure. A similar reason has yet to be discovered, if used correctly, not early from the 10th year after installation.
2. Desire for a change to the interior, and from there, and in the old age, illuminating the body. But you can send the fat in the forest. With a spotlight, it is still possible and all use of special decorations. For polyleys - change the nuance or work on existing.
3. It was crushed on the panel for the option of tavan. In this case, there is no need to work for the dismantling of the tavannata lamp.

In this case, dismantling is indispensable.

It’s a lot of forest and skip the lamp or watering your own right, but it’s important that you know the algorithm for action.

back kjm sdzharzhanieto ↑

preparatory work

For yes, there are no problems in the dismantling process, try and prepare it. Prviyat e theoretical training. That is, you will sort out how and send for how for different types of lighting of the body. Nai-chesto se Izpolzvat "points"; crushed on polys with different types of installation are still different.

Tools that are needed in the process:

• indicator screwdriver.
• Insulating tape.
• Ticks.
• A few screwdrivers: flat and Phillips.
• Knife.

Important! In order to safely reach the illuminating body, the tremble must be removed from the store, beforehand, get rid of it. Premahnete yes, check the indicator.

back kjm sdzharzhanieto ↑

The dismantling process

The procedure for dismantling a round or square spotlight e is as follows:

1. Roll down the protective glass, the grate, like ima takava, develop the kruskat from the jarzhach into an illuminating body.
2. Unhook the vnshnia rib on the tapiceriata. For goods, it is convenient to use a flathead screwdriver or a knife. Tova drive to little difference. Put a friend's flathead screwdriver in it.
3. Osventova, tear up the cases on the lampat, until you get a holiday, in some way you can, yes, you can drink it. In this case, you will find out more, the more you get, fix the keys. Let those tryabva sensibly squeeze the weight and carefully develop the weight.
4. For yes, get rid of nai-nakray kutiyata, leaving yourself and develop a screw-driven screw into a terminal block.

Dismantling treabva and all perverted carefully

Wrongly dismantled

You can, and intend to sveti for dismantling, so you will cut it for a fee for an obikolkat on a lampat. Tova e is sinful and dangerous. Reasons:

• For a fee, the trace of takava names is practically not subject to installation. Contrary to all odds, it is possible to simply change the lamp instead of lighting the lamp.
• You can also remove it from the conductor, something else foreshadowing the shock currents.
• It is not even possible to install a lamp that will change the size of the old place. The only option is to mount the lighting fixture with a diameter on the top.
• This will also void the warranty for installation work.

The price for such a crushing of the firmness of the temple, in any case, it is also necessary to change the whole place openat tavan.

The video will also show how the lampata cannot be dismantled:

back kjm sdzharzhanieto ↑

Potential problems with razglobyavaneto

Don't blame the forest and get rid of the LED spotlights. Nai-honor difficulties:

1. Spring-loaded hard e hard. As a result, the contour on the tow on the zhleb or plastic is thermally prosten and can be destroyed.
2. Current blow. It is possible, but take away and turn off the device, before you stop working.
3. Naranyavane on the right from the cut on the spring. This case is especially honorable, once upon a time it was heavy on the lighting, it was on the other side of the city.
4. Damage to the tape from the keykite, in the case of inaccurately worn from the sedalcat.

Dismantling is extremely difficult, but it is equally important that all basic safety rules are followed. Ako nyama absolutely no skills for working with electrically nedi, everything is still kinder and leave the tosi process in the electrical engineering.

Premahvane on the lighting rod from the full tavan

Okacheniyat tavan from gypsum board is different from the option of tavan according to the surface of the solid. For this, damage the time for the process on the dismantler, there is a lot of shaking and “experience”. The procedure for removing the drywall from drywall is similar to the tazi, presented for the opnati tawani.

In any case, it is not necessary to crush the bodies on the illuminating body; suffice it to change the lamp or decorative element.

back kjm sdzharzhanieto ↑

Video for dismantling on spotlights

You can also show the video how to properly and dismantle the lighting rod from the open tavan:

Dismantling on polyley

Polite scho ceto montirat on opnati tavani; crushed they need a lot more. The procedure depends on the type of fastening element used for installation time.

Fixing the cookie

Step by step algorithms:

1. Turn off the deposit on the polyley on the shield and do not take it away and check if there is any voltage.
2. Lower the decorative hood, for yes you will get access to the dupkat for a fee.
3. Put a rokat si into it and wear out a polyley from a kukat, tear it out together with an element on a cable.
4. Leave and turn off the polyley. At this stage, it is prejudicial to have reinforcements from an assistant.

Dismantling on polyley from opyat tavan

Board for fasteners elements

Tazi option for installed is not easily crossed, in case it is, try to continue, somehow as follows:

• Unplug it from the device and check if there is any voltage.
• Skip all the crackers of the elements from the polyley: sennitsa, lampi, hangers, other decor.
• Develop the decorative fasteners of the nut and roll the capacat and the frame onto the polyley, some of the curved tape.
• Turn off the conductor.
• Leave alone and develop the samata tape from the saddle to the tavana.
• Ako lentite sa attaching to the pumping and noviyat polyleys, the type of installation is different, the platform is also a ripple and there is a premahnata.

back kjm sdzharzhanieto ↑

exit

The process of dismantling for every light source from the op-nat tavane is much easier from the installed one. Especially if you know the rules of the procedure.

PreviousLampi, applicationLampi species squares and technical characteristicsNextLumpy, applici How do you know, when you choose krubs for opnati tawani