Undercutting and installation on a magnetic system for lighting on a kolovoz
A relatively new type of lighting body is attractive with an unusual design and glare when adjusted for lighting in a room. Magnetize the illuminating bodies on the channel of the shinny channel is fundamentally different from all the known early models, somehow at the beginning, for some reason, assembling on the tavana, so and in the verigata for filing for the protection of the pressure of the km krukkat.
Magnetic rails and light lines are used widely in trade and industry among
Containment: 1. What are magnetic rails and light lines? 2. Typical tires 3. Kakvi sa lampite 4. Whatever it is necessary, for yes shield the systemat 5. Like a look in the interior
How do magnetic light lines represent
The lighting system on horizontal rails and tires has been known for a long time. The magnetic system for lighting is traditionally used in rooms, sometimes it is very precise to adjust the distribution of light to a stream of light, for example, in art studios, museums, galleries, installation objects, and many others where.
Unusually in the firing of the magnetic system - start by itself for a fixed position on the lighting rod on the pistol:
- Tsyalata length on the stomanenata tape is placed inside the busbar. Tova means that the magnetic bracket is still stuck everywhere on the pistol.
- A little neodymium magnet from the category to the tezi, crawling into the magnetic bravo and the key on the turn, with the splatter of the km they are on the surface of the body on the lighting rod.
The idea for using a magneti for a montirane on a light source is ideal for a system for home lighting.The strength of the silat on the attachment to a single magnetic disk is sufficient, for sure hold the test up to 150 g. From the magnification to the tegloto to the illuminator, they throw it on the "petnata" on the magnetic system, embedded in the hulls, simply increasing it.
Even the models of the gumi with magnetic rails, in addition to the magnetic pumping, are equipped with a system beyond the brackets. Dori Ako accidentally hit the hulls on Svetlinat on the investigator in the bus, that yama and paddne, until the locking key was not released.
In the valley, often on the graded tire along the vertical walls, you can see, fix the channels behind the key
As a result, the product manufacturers on the system for clarification on the piste will succeed and produce some kind of universal gumi for the pista, which differs by itself in standard width and type for installation on the tavan. At some point in time, they cast on the model the illuminators of the body on the magnets, pumping for all the manufacturer into tens, and for some marks - one hundred.
Magnetic body lights are intended for low voltage 24 or 48 V, for some technical reasons the tires are considered safer when mounting or changing to body lights.
In addition, there are two electrical wires in the magnetic bus, and maybe two control buses, which will not transmit the signal from the dimer.
Type of tires
Nearly cross-section rail and tire models are U-shaped with additional pages of raft or cross-section channels. Width at the waist - 25, 35, 45 mm. Follow the height or length on the profile - 65, 70 and 85 mm.Broyat, the configuration for additional elements and the connection to the magnetic bus is selected depending on the beginning of the installation on the tavannit lamp.
Three types of magnetic tires are used for domakinsky light lines:
- Models with vdlbnati tavani.
- Models are burnt out, put the top surface on the tavana.
- Rock the model, mount it on the tawana with the help of the rocker's calf.
Magnetize tires sa by skypi from the profile for conventional systems for clarification on relsite. Osventova razlikata e 3-4 five.
For example, the average cost of fixing a magnetic busbar is 30% higher than the conventional veneer span from the type of fixing.
Surface mounting and overhead bus channels are considered for nay-sorry and accessible for installation. The configuration on the Pistat e is approximately one and two times. For mounting on Tavana, you need self-plastic dowels and self-tapping screws.
Cash in sa vdlbnati magnetic rails for picking up tavani and for cladding from drywall. Osventova for the last case of the profile is counted for one and two sheets of drywall.
Please note that they sell this rule with a length of 1, 2, 3, 4 m with fasteners, but without storage, connectors and connectors. These parts of the trial and purchase separately.
Kakvi sa lampite
There are two kinds of lighting devices used in the magnetic system. Includes installation in a solid fixed busbar trunking from a graded or above ground type. Tova meaning that you can rotate the sepanti can and will be located in the structure on the body on the light body, somehow allowing the light stream to be oriented along arbitrary beginnings.
They repeat the type of magnetic light line following, assuming a very vertical line on the light line. Those se izpolzvat on ocheni follow from the gumi.
Rotary systems
Zapochna has been developed and implemented on a new system for clarification on pyrite, for yes, and even for the regulation of the litter on the light line. Therefore, the range of rotating body illuminators and find-diversity models.
The most popular byaha model with a calf in dots format with a change module on a vertical pant.
Maybe even more from a single module. In this case, the weight on the device is directed to the form factor on the right-hand side with the possibility of turning in the vertical and horizontal plain under the angle in the range of 30-90O.
Rocking the Models
Contrary to the fact that the gavkavoto is not limiting the ability to regulate on a sling on a light stream, model from a hanger sa popular for the sake of practicality and sophisticated design.
Modeling from a hanger can be conveniently combined with a linear gradation of the lighting body.
linear models
Tozi type of illuminating body is considered for nai-sorry; that yama vortyaschie vozli or additional systems for okachvane. According to the principle of the commodity, the case is right-handed with an LED source on the light, which is a ripple so that it is plugged into a magnetic tire on a kolovoz.
There is a huge plus on the linear magnetic lighting of the body, so that they can and mount it somehow on the tavana, and on the wall on the flock. Vyarno e, che for the comrade is still shaking and use the lining from drywall with an insert from the humi fence for the magnetic rail.
Whatever it is necessary, for yes shield the systemat
First of all, make a diagram for the location of the magnetic system for the tavana for the same. Comrade, let me count the broya for the necessary linear, needle, T-shaped and cross-sleigh of the three-piece conector.
Here we determine the point on the fastening on the storage block on the shinata and decorative chips.
It is necessary to make all the electrical circuit separately for every isolated clone on the rail bus.
It is necessary, for all the airframe is connected to the protection devices for dimmable and non-dimmable light sources.
Dimert se montira separately on the stenat and svyarzva kam scoreboard for remote control. In case of non-adjustment of the intake system, all devices can be switched directly to the clarification switch.
Characteristics for installation and connection
Nay-lesniyat for sglobyavane surface mounted tires. Spores preliminarily prepared a scheme for choosing the need for a broken segment on a profile for a kolovoz. On the first place, tryabva and cut the material. Tova can be directed with the help of a mill or a desktop machine. Osvent tova's profile on the kolovoz is torn under every kind of agl directly due to wasps.
Repeat the stage of squeezing and crimping on the conductive conductor. Tova tryabva yes, direct it, for yes, install a connector or a schepsel. Then you can mount the busbar trunking on the tavana, mount the connector and put the storage in the system for magnetic brightening.
The process of slipping on the tire tire is complicated by the fact that the pistat is not attached directly to the tavana from the dowel, but with the help of a pumping chair on the gavkavi. Profile on the pistat e fixed cardan cardan with the help of a profiled plate, some trembling and se vkar in the zhleba on the rear country on the pistat.
The function for squeezing - the need for installation on pumping with a screed, is determined from the manufacturer. In the opposite case, the pistat is simply more fire under the test for devices.Osvent tova point on the okachvana the trebva must be sure and fall at the top of the place, somehow self-mount the connector, dokato dalzhinata on the gavkavit element and the trebva and everything is regulated. Comrade, distribute it evenly and evenly flatten it from the same on the magnetic illuminator of the body along the length of the profile on the kolovoz.
Mounting on graded magnetic rail
Mounting on the grades of the system is a skill for mounting on drywall and check out the tavani.
Watch out for the gumi, grading in the PVC folio, all from the profile with bravo, some fixer work on the promotion for a fee. Samata bus se montira preliminarily top roughness tavan with the help of a graded platform. Before you examine the material, it is necessary to carefully and trim the humate along the height, otherwise the case is flat on the tavania tavan nyama, but it is ideally equal.
For tavani from drywall, two installation schemes are used. Ako on the magnetic bus is a small light body light, this is using the option for a single-layer installation.
In this case, the busbar is removed between two galvanized profile carriers, which hold drywall. Behind the golem of the room or system with a long tire, all double-layer fasteners are used.
Tazi system guarantees that there is no sagging or deformation on the busbar. The rest is rightly connected to the railroad tire of the city.
Like a look in the interior
The first image is recognized with a whistle lightening and is downloadable. Look out, four things from nai-complete and successful schemes for any housing space. Stylish design is an excuse for practicality and gvkavostta for lighting system. Almost wines pistovata magnetic system is turning the most important detail from the interior to the flock, regardless of the design and choice of style.
Lamps in the hall, decorating in a minimalist style, with the help of swiveling lamps, it is convenient and put underlining accents at the top of the definition of participation from the wall PredishnaLampi, applicationLighting for the kitchen-hall with a lamp
