Kakvi spotlights yes choose for tavani from drywall
Title: lampi, applici 
Ako kashata vi ima tawani from drywall, togawa probably ste mislili yes installirate spotlights. Lesny for installirane, compact, comparatively evtiny and truly universal, they fit well into all interiors at home and allow you to nay - dare design ideas. But yes, choose the right spotlights for plasterboard, tryabva, yes, you know what kind of body you are and what everything is capable of.
Containment: 1. Species spotlights for tavani 2. Light source type 3. Halogen 4. Save voltage 5. Mounting on a lamp in a tavana
Species spotlights for tavani
Spotlight behind the tavani from drywall can be divided according to some criteria:
- Installed method.
- Vozmozhnost for zavartane.
- Type lamp for lighting.
- Saves tension.
Method on installer
Depending on the task and your possibilities, you can choose either a friend or an affiliated structure. There is a lot of wood for installation, this kind of fixation is taken out according to the standard method: screw, self-tapping screw, special brackets for housings for lighting, etc. ty kato illuminating tyalo e tsyalo located out of the tavan. Kato seima foresee, why fake tavani veche paint on the premises with as little as 100 mm, installed on a surface mounted illuminator with a naked eye, and it could turn into serious problems.
Tavannite lamps, graded into the structure from drywall, but there is a lack of deprivation from tosi, so it’s almost a complete device for otiva long-term under the drywall on the tavana and borrowing space between the tavana, in some cases it’s in vain. The rest of the room itself is intended for a lighting device, which is not the most convenient in relation to the amount of space in the room, but also aesthetically. But here ima and lack. For yes, install a lamp in a tavana, tryabva and cut the hollow into drywall in the format and size of a lamp, for some reason, tryabva yes you admit, it’s a little difficult from screwing on a self-tapping screw or hammering it on a pyron.
A shot on the hearth of the model (clearly) and in the floodlights
Opportunity for booking
Ty kato vsichki searchlights imat is relatively small on the spread (usually 30-90 degrees), the possibility for brzoto is very useful for them. Some, somehow superficially mounted, such as gradations of uredi, and a specially movable frame, for some reason, allowing you to screw the lampat together from the reflector at an arbitrary angle.
Sometimes you use rotating illuminators, you don’t need to strict and support the necessary tilt on the device, then at the time of installation - you can and soak the light stream on any device when you want to turn on the room, then follow the adventure on the installation work. The function has been reduced, if necessary, please allow me to change the area to light up, for example, “slowly moving to a rakata”.
Vgradeni (vociferously) and mounting on the surface of the rotation of the set of luminaires of the body
Light source type
Finally, the only source of light, used in bitovite spotlights, is a crusher from a hot liquid. Dnes chose the camp much richer.Depending on your preferences, tasks and budget, you can use the body wall behind the drywall, then use the following types of lighting lamps:
- With a hot chin.
- Halogen.
- LED.
Lampi
Nay-eutinyat and lamp type available. With a wide din from the main / capacitance and power, you can forestry and choose a suitable lamp for any type of lighting body. Lack of lampite with a pressurized flask, including low light power (the ratio of light to light is the flow of consummation to energy) and a relatively short operational life, which is an average of 1000 hours.
Lampi back kjm sdzharzhanieto ↑
Halogen
All in all, you can eat the crumbs from the junk that is being burned, but thanks to the special additives - halogens - they work for a long time (the average resource is about 3000 hours). The spectrum on the halogen source for light is slightly yellow and decent for daytime light. Halogen lamps very slightly on the sky from the conventional lamps with the ignited plug and light on time for the work of the burner on the device to heat up to a high temperature (250 degrees Celsius or more). Comrade tryabva and this ima was foreseen when it was designed for lightening, so it was a lot of grief for lighting, but it didn’t burn. And drywall is not harmed locally. As far as energy efficiency is concerned, due to the high temperature on the heating coil, halogen extractors are a little more economical from the Ilich flasks.
Halogen lampi
LED
Dnes toy e nay is effective and promising a source for light.LED lamps do not heat up a lot (40-60 degrees Celsius), they are compact and allow you to get lightening for almost any color temperature (syanka) - from yellow "heat" to blue "cold". Svetlinnata power on the semi-conductor plugs is about 8 five yards from the basin on the plug from the litter box. The main disadvantage of the diode design is still a high price, which, however, will compensate for the long operating life (up to 30,000 hours or more).
The LED lights for the light length of the tavana can work both under the format for conventional flasks, and under the format for the preparation of the device.
Dependence of the emission spectrum on the color temperature back kjm sdzharzhanieto ↑
Save voltage
Crumbs crawled in spotlights for tavan, there may be different operating voltages, such as AC or DC. Light from a pressurized switch or a suitable power source with a voltage of 220 V and many times 24 or 12 V. Such lamps can even store everything with an alternating or direct current. Somewhat important for halogen lamps, but the low voltage version is much more common. Conventional lamps for 220 V are more convenient, but the installation is not exceptionally simple. If you choose a low-voltage lamp at the top, then you can add a step-down transformer (converter) for a corresponding voltage. More than that is necessary, but the power of the wind is even sufficient, for saving all the lights of the lamp.
The situation is a little different with LED lighting and custom lighting devices. The LED is a polarity device, which means that the voltage is slightly constant.Some semiconductors and lamps and mats are protected by a block (driver), which not only generates the necessary power on the LED, but also acts as a protection for the lighting rod from overvoltage. If it is connected to such a device without causing problems, then it can work from 220 V. In this case, it is even better to purchase a driver in advance, for some reason designing lighting bodies, and the power of the driver is even sufficient, to save all the lights of the body.
Switching the converter for halogen lamps with low voltage (low voltage) and storing the driver for LED lamps back kjm sdzharzhanieto ↑
Mounting on a lamp in a tavana
Installed on the surface mounting of the lighting body on top of the tavan from drywall is a forest question. Almost every lighting device foreseeing one or another type of fixation is equal to the surface (tavan, wall, etc.), so there are no problems with installation - drywall is perfect pierced and hold a self-tapping screw. If the lighting is too heavy, then maybe there is a fixed frame for pumping the tavan or the main tavan.
Installing on a spotlight in drywall is a little difficult, but you can even direct it yourself. For yes, send the tov, more tryabva and cut the hollows into the tavana from the plasterboard of a spored size on the spotlight. The trace remains and install the lamp itself in the tezi, open it, kato predita sta vyrzali kam tah, store the conductors, which predita sabili positions in the space between the tavana.
If you have decided to try the silat si and independently install the spotlights in the drywall tavan, then you can get detailed information about the process on the installation in the article.How to install spotlights in drywall».
Nadyavs se, che tazi article helped you figure out how to represent Tavanskite bodies from drywall and how they differ from each other.
PreviousLampi, appliciKakvi lampi yes you will elect for opnati tavaniNextLighting How to choose street lighting with motion sensor