Lighting for the kitchen-hall with a lamp

The system from slightly moving the lighting of the body, mounting on a horizontal surface with the help of a vertical support, all of which has been actively used for a short period of time, mainly professionally equipped with lighting equipment. Now you can see the light lines on the tavana in the kitchen, in the hall, in the studio. In some time, the quality of lightening in the kitchen space has improved significantly.

Containment: 1. What is the clarification on the pistat 2. How do we choose the components 3. Pisti in the interior of the kitchen - a selection from the idea for the design Svetlinata on a kolovoz can be done horizontally and vertically

What is the clarification on the pistat

Emphasis on the systematization of the possibility and place of illumination of the body along the length of the horizontal trace, called the trace. LED lighting lines self-mounting according to the length of the rails. They give them all the definitions from the size of the flock, which is the same as the foreseeing the area for the kitchen. Ako disassemble device for clarification on pistat, then it is completely possible and install additional sources on light and, if necessary, even avoid the gun.

Ima rationally grain when used on a truck lamp in the kitchen:

• With the help of a little move the source to the light, a lot in the forest and in the Evtino and all illuminating the kitchen space, for example, for all the oshiguri, the necessary degree of illumination over the raft or zonate for Ryazan is to be kept.
• Consider the model of clarification on the head carrier of the equipment with a rotating sepanti, as well as possible, as well as necessary, and all the flow of light from the zone for cooking and storage of kitchen meat.

Let's see, the idea for using the kolovozna system in the kitchen has some shortcomings. For example, it was cleaned for Pistat, serviced for Pantite, and diffusion substrates are more shabby and all perverted much more honorably. Osventa is stable for clarification on the pyrostat in the kitchen, depending on the quality of the component and on the product, the model for vending is chosen correctly for the conditions in the room.

Based on the lighting system e kolovoz with gumi with current, the position of the top vtreshnata surface. Light on the illuminator of the body to protect it from the bus voltage through the jumping of the contact system.

Metal on the gum and contact every time for work, and in the kitchen it is covered with dust and dust. On the right I looked at the sa stupidity, but it was changed into viscose plaka with alcohol and dory from a trace from the contact, a deep skrit in the channel on the profile, no, it’s kind of something, send something to tryabva.

Contrary to the choice of the system for lighting on a kolovoz for a kitchen, this is considered reasonable and logical. The reason for this is simple: shine on the spot, make sure you fit well into the modernity of the kitchen interior.

Follow up on compatibility with the system - how important it is, you know

We can't combine all the design elements on the wheel truck, despite the fact that the lighting systems can be installed and have a lot of similarities between the si. Tova means that it is impossible to miss the plafond from the case and the lamp from the tavan in the hall, and yes, the pistat in the kitchen, without yes, the food for characterizing the product. Compatibility between the system for clarification on a wheel carrier and an accessory, existing on its own models, produced from a single manufacturer.

What is the difference between the light sources on the follow:

• Saves tension.The lamp can be designed for 12, 24, 48, 220 V. In the latter case, the voltage can be stored either single-phase or three-phase. For the kitchen, it is mainly used 12 V lamps with low voltage on a 1-phase bus.
• The device is on the rails and the system is fixed for the lighting rod. The systemat for lightening on a kolovoz can be from the use of mechanical and magnetic brackets. In the first place, the lighting rod is mounted on the pistol with the help of a spring "ezik".

There are 3 lines on the pistat for a three-phase connection with variable voltage, neutral and earthly. In response, tie three groups of lamps, each one under your own key. Depending on the manufacturer's specification, the product may be single-phase protected over three lines or independent circuit protected from a single source.

From what is the essence of the system

For the kitchen, it is better to use the model with a pisti under the format on the closed U-shaped profile. Takiva design is safe for work, thank you for support and it’s all in the design.

One simple follow-up system:

• The current conductor for the voltage supply of the shinata to the kolovoz.
• Tape tape.
• Adapter for connection to LED lamps.
• One or more lamps.
• Extreme caps.

For the kitchen, you can choose a single-headed system, for example, when you ask for lighting on a working raft or a furniture wall. Mostly clients, who prefer the system for follow-up, refuse other types of sources for light. It is generally accepted that on a kitchen tavan in a slightly different form from one and the same type of lampi and dory with a small gl on a scatter on a bright light, perform functions, introduce disharmony into the interior.

In a rational way, use the light line to keep an eye on the top of one or a few kolovoz or even combine in a single supporting frame from the profile on the tire. Sufficient food and increase the broth on the lamp, follow it, change the sprout for a light stream and place it on a pistate, so that you can comfortably lighten up in the kitchen, without yes, you should resort to knitting in a tavana or a point from the source to a light.

For yes, the system is complicated from a little bit of a site, it uses additional components. For example svarzvaschi elements. With the help of L-, T-, X-connectors, you can bend the head system into an L-shaped or right-hand shape. The coupler connectors additionally give the possibility for protection of the voltage from one kolovoz to each other, located directly under the main assembly line on the light line on the kolovozit.

back kjm sdzharzhanieto ↑

How do we choose the components

In the first place, the busbar duct is chosen for a single-phase network. Forgive the models for the pista, maybe two or three pista. In the first case, "zero" and "phase" on the shifting voltage se give protection to the kolovoz. Vtoriyat, suitable for the kitchen, from the ground line.

Rail section for two conductorsGround Pista

When you complicate the models, the channel is equipped with an additional pair of conductors, with the help of which the LED from the light source is obscured (usually according to the Dali protocol).

Edge on current conductor

First, purchase a lighting system, try and calculate the installation scheme for the rails on the tavan. What is important, what is necessary, and if so, foresee the future on the conector-conector.

Mechanical and electrical connectors can be used for docking.In the first case, two sections on the pistat are connected without and without preheating to protect the voltage, for example, as a winding and isolating one section from the other. The second version of the warning is attached at the same time. It is clear that, under the conditions of storage with low stress for kitchen lighting, with an increase in the total length for a kolovoz and an armor on the connector, the stress on the contact is less. This is for protection, when you choose a model, vinagi tryabva and all you are interested in from the limitation on the length of the shinata, it is set by the manufacturer, depending on the resistance to tension.

Functions for sglobyavane and svarzvane

The problem with the voltage drop is solved through the pre-heater on the point on the connection to the busbar trunking of the electrical network. As a rule, system for clarification on the railsite in the kitchen with a conductor connected to the current terminal. So it’s more convenient to convey it as a cable to the wall or tavana to the kitchen. In the last case, tov ce rule for all in all, according to shinata to pistat.

Election on the scheme for mounting on a kolovoz tavana influencing the top of the ability to drive.

The horizontal tape can be stretched for a long time, and it can be spent on a hanged-up goods, as well as a fixed kam tavana on the kitchen with the help of a long-distance pumping station.

In addition to the traditional pumping, pistata and montirana on the kitchen tavan, two beginnings each:

• Vvv version on the invoice. In this case, the capacity of the busbar trunking is limited by itself from the health of the fastening element.
• Embedded in sheet from drywall. Merchandise is limited from health to additional material.

The last option is not preferred for the kitchen, but the work on the lighting system depends on the quality of the installation on the shinata.

back kjm sdzharzhanieto ↑

Pisti in the interior of the kitchen - a selection from the idea for the design

The system for lighting on relsite has long been turned into an element of design on the site. Nay-sorry schemes with the right-hand frame look stylish.

Slightly follow the lamp and look out organically in the interior of the kitchen. Especially the designs and colors on the furniture are reciprocated.

Scheme for lighting on the furniture, using lamps to keep track, not adding to the kitchen-Tavana space with unnecessary details. Any other option, such as linear or dot light lines, all reproduced on pyrite.

The systemat for regularization on a posokat on a svetlinata giving the opportunity for zoning on a space to a kitchen-hola.

Write lamps looking impressive in black and white interiors. At the right time, saturate, tape, and check for light, not all the time and all the script. Those are cleverly distinguished from the background on the whitewashed walls and tavana in the kitchen.

In the kitchen, from the bottom of the tavani, detail for clarification, it can be hidden, as it blooms on the cabinet and the pistat from the color, it was chosen for the Tavanian coating.

PreviousLampi, appliziPosition on spotlights in the kitchenNextLamps, appliques Undercut and installation on a magnetic system for lighting on a kolovoz