Protect the light of the body with goodness and where will you use it in a good way?

Title: lampi, applici

Enclose luminaires body sa illuminator, which is designed to be mounted on fences or other building elements in the building, as well as the surface for the position of electrical conductors and cables.

containment: 1. Characteristics on design 2. Advantages and Disadvantages on the Graduation of the Lighting Body 3. Type of lampi 4. Where can they install and install? 5. Nai-popular manufacturers

Characteristics on design

It is used on slewing and squeezing fabrics, such as PVC panels and surfaces from fibers, drywall and other modern finishing materials, used in decoration and design on premises from various boards, leading to a wide use on grading body illuminators for wickedly brightening kashchi and apartments.

Designed for lighting devices from Tozi type, it consists of three main elements: a body, a light source (lamp) and a body.

Settings Parameters on the floodlights

Housing on the lighting rod

The format for kutiyat can be different: square, round, right-handed, etc., somehow and under the format on the tape. Calft determines the parameters for the device, and then the destination is not ready.

The material used can be different, such as plastic, metal and glass.

The case is made to varying degrees of protection against moisture and dust, reflecting in some ways in the technical characteristics of the lighting device (degree of protection - IP20 / IP44 / IP54, etc.) And allowing it to crawl into wet rooms (kitchen, bath, shower cabin, etc.), etc.).

At the same time, a mounted cartridge is mounted on the device, some serve for the installation on an electric lamp, and otvn - a diffuser (plafond). Some of the products are not suitable for the equipment of the sennik.

Housing behind a fenced lighting rod View of the enclosed lighting tower

Svetlina

Different models of such lighting bodies are expected to be installed on different sources for lighting, they can yes:

Crumbs with a squeezed liquid with different types of base.
Fluorescent lamps, various technical characteristics.
Halogenni, with different types of contact vrazki.
Light-emitting diodes (LED lamps), with a base from various types.

The working voltage, for which the lamp was designed, e 12/36/220 volts, determines the presence or absence of this on the converter in design, some of it from its own country, reflecting on the price of the product.

Type of lampi View of the lamp behind the body lighting barriers

Fixing elements

Fasten the elements on the illuminating bodies will determine starting at the tyahnoto instaliran and fixing in vtreshnostta on the room and in the constructive element, all of which is improperly mounted.

Tova can be yes:

cookie, crust or prut, at some point the source on the lightline is filled with tavan;
spring-loaded switches for fixing on the projector;
Elements from frame to pumping tavan or other montage design.

Protect the light of the body with goodness and where will you use it in a good way? Options for fixing on the graded lighting rod kam tavana back kjm sdzharzhanieto ↑

Advantages and Disadvantages on the Graduation of the Lighting Body

Any technical device for determining advantages and disadvantages, which will determine the girth for an unready application and the favor for support. Tova vazilo somehow for illuminating products, and for grading lamps.

Preference for design

Base on lighting bodies from Tazi Group, in comparison with other options for editing, ca:

It is wide range from the model to allow you to choose exactly tosi, some dissuade you from researching for it (design, construction, price, personal preferences).
Ease of construction and assembly.
Possibility for using the main and additional lighting, zoning on the space, somehow outlined on the design elements.
Maybe yes, it’s mounted somehow on a tavana, and on a surface on a wall or furniture, as well as other building structures (steelbi, ridges, balconies, etc.).
Convenient operation and support.

Illuminating the body with vgraden tavan Grade the lighting bodies to fit comfortably on any surface

lack

Insufficient include the following indicators:

The trace of the installation cannot be transferred to the device without damaging it for additional construction and installation work (open to the right to the new installation).
It is used on the body illuminator with a lamp with a lit lamp with a significant geometric size and increase by the distance between the tavana and the tavana (walls and sheathing elements), somehow drawing a useful volume on the room.
Sometimes all the points from the sources are used for light, for all the necessary clarification, and the need for a significant amount of lighting devices.
In terms of installation time, it is necessary to foresee the possibility of damage to the surface, in some cases of damage to the installation (due to fabrication, plastic and damage to the top of the elements and furniture) in case of overheating or damage to the source of light during the time for work.

back kjm sdzharzhanieto ↑

Type of lampi

According to their design and beginning with the installation, the lighting bodies are divided into several types: dotted, hanging, linear and dotted.

Tochkovo - the product itself is a small lighting device, mounted in a tavana or other design and serving to create a tightly saturated stream of light.The advantage of this design is that it can be combined on a large scale, assemble the elements and design into one.
Rocking - those include mounting the top of the flat surface with the help of a hard fix (cook, flat, etc.), a trace of something, thanksgiving on the roll, tyahnoto the position of the seat is regulated directly on the roll of the tavan.

Vgrade floodlights Searchlights for citizens in tawana

Tozi type lighting has ruined the popularity of consumer environments due to the limitation on the area of use and low functionality.

Linear - coma, as a rule, lighting bodies with fluorescent lamps, installation in administrative and industrial premises. Mounting on the device can be different, such as: downloaders, cookies, such as elements on the pumping of the device and other bearing structures.
Cascades (petna) - serve for illumination and illumination in determining the zone from being placed on a shrine or flock.

The dotted structure of the entire structure is from the frame and rotates all the mechanisms (s), at the top of which is the placement of the lamp with the lampshade, making the luminous light soaking.

Petna can be installed on the surface on a tavana or stenata, as well as on other building structures and furniture elements.

What's the power ima?

Ako design including installation on a lamp with a lighted plug, then the power for a light source from 15 to 60 W - a single cassette is in the device.

In the case where the light source is equipped with a fluorescent lamp, the power output is usually between 18 and 160 W, which is expected to be one or four lamps.

The power on the projector can vary significantly, which explains something from the view of the installed lamp - a halogen or ice lamp, and numerically it can be from 2 to 30 W, with a single source installed on the light (lamp).

Vgrade floodlights Floodlights ss average brightness back kjm sdzharzhanieto ↑

Where can they install and install?

Somehow, in a different way, the scope of the use on the wall of the lighting body is very wide - from the industry of the worker and the office of the fence to the dwelling for various purposes, decorating in an individual style with the help of qualified designers.

The design of this type of device from Tozi type allows you to install it in:

pumping and grasping the tavani, directing it to one or the field;
walls and barriers, which is enough debeli, for the sake of gi poberat;
various building structures, elements of interior decoration, such as furniture.

Mount all the perverted space on these elements. The method for installation on the vdlbnatin is from the floor, as the enclosing structure is made from air, drywall and other planes. Whenever you mount it in the opnati tawani, dot on fixing on the lighting body, it will be determined at the stage in the development of the project.

For which premises are sa nai-suitable?

Design for a lighting fixture, which is a guarantee, it doesn’t see much, it’s a lot suitable for small rooms: a corridor or a corridor, a bathhouse or a toilet room.

Vdlbnatoto from a good look spotlights in the kitchen and in the room, where it is necessary to zone them or settle for additional lighting, where it is necessary.

Spotlights in the kitchen Vgradeni floodlights vv vtreshnostta in the kitchen back kjm sdzharzhanieto ↑

Nai-popular manufacturers

Grade lighting bodies are produced from many manufacturers of lighting products in various industrialized countries around the world, some of it is due to the popularity and tursen.

Nay-trsenite models, tarseni environments cupuvachite, sa models from the following manufacturers:

Novotekh (Ungaria).
"Electrostandard" (Rusiya) - LLC.
"Lightstar" (Italy).
"GAUSS INT GROUP LTD" (China).
LLC TPK "Varton" (Russia).
"Arte Lamp" (Italy).
Citilux (Denmark).

The list on the company, working for Tozi Pazar on lighting products, is quite extensive, so if you choose a popular and reliable brand, some of it can be dissuaded on the criteria for selection and personal preferences.

Predishna Lampi, applicationGypsum lampi, which one you choose and where you use it Next Lampi, applici How can we choose a doubly fenced illuminating body for tavani