Koi cups sa good for pestene for energy or LED

Title: Species and types of lamps lamp selection

Crumpled on a lamp with a burnt litter with more energy efficiency, turning into an honored phenomenon not only in Europe, but also from us. In public places, state institutions and industries, it’s difficult to protect the evening, and yes, you’re going to ruin a niche. In apartments and private houses, the percentage of use of energy-saving lamps is still low.

Containment: 1. Characteristics on functioningnet on various lamps 2. Comparison between LED and energy efficient lamps 3. Advantages and disadvantages of LED and ECL

Two more cross-sections of the lamp type, which are cupuvat instead of conventional, sa LED and fluorescent, which are more often crossed by the name of the last energy-saving. It’s determined on a commodity, you’ll choose something better for houses, it’s better to help and sort out technical principles for work and a difference in productivity.

choice on lamp fluorescent and LED lamps

Characteristics on functioningnet on various lamps

In the energy-saving lamp, the light is bright from the electric arc, burning out in the bet. Therefore, the design of the whole system consists of a long glass tube, containing an inert gas with a livestock and two electrodes, which are under voltage. For yes, curl such a lighting device in an ordinary lamp, you need to arrange it in spirals with different configurations, add a control scarf and a standard base. The glassy surface is covered with a special phosphorus for getting visible light.Putting on phosphorus determines how pleasantly it is more lightening, then for clearing and how it is more bright in color - fuel, daylight or jelly.

For lighting work on the golem, decorative lighting and aquarium lighting are used daily and ECL is a conventional requirement. The power and geometric dimensions on the basis of the lighting device are dependent on quantities, for example, a lamp with a power of 18 W and a diameter of ∅26 mm is also a length of 590 mm.

Principle for energy efficient lamp

The second type - energy efficient LED lamps - is used by semiconductors and devices that convert energy into electrical current in optical radiation. A few dozen LEDs are self-mounted on a printed circuit board, a radiator is attached, a driver (control device) is on the base, and a plastic diffuser is placed on top of the diode. Tozi is a structural element, it is necessary to direct the stream of light from a few dozens of small sources in a uniform way, for this they will smooth out the difference in illumination.

Principle on LED lamp back kjm sdzharzhanieto ↑

Comparison between LED and energy efficient lamps

Whenever you ask, what kind of lighting devices will you choose for your houses: LED lamp or pestene for energy, first tryabva yes you will understand, Kakvo How exactly do you find it and how do you illuminate it and just barely trace it is possible and how do you define the look Kindly suitable for specific occasions. The optimal ratio between brightness for lightness, consumption for energy, radiation spectrum and economic efficiency dictates the expediency of using one or another type of clarification.

Comparative table

Which lamps are better economical?

When answering for Tozi, the question is tryabva, yes, foresee three factors: the ratio of power to power and the light flow, the exploitation belly and the price. After two parameters of the LED device, it is determined that they are sad: if the flow is equal, the consumers will consume half of the energy, save energy, and spend an average of three five times a long time. As far as the price is concerned, for the last few years, high-quality base lamps from two types of struvate are about 150 - 200 rubles per broy. or lighting on the cabinet.

Svetlinen flow

Comparison table for light stream

Tazi characteristic on the source on the bright side, the indication is sharply from the radiation in the spectrum, we see it behind the human eye. Mernata unit e lumen. The light stream can be different for one and the same type of lighting body, depending on the beam on the light line, the location in the diffuser and the format on the lamp. The quality of the required fluorescent lamps can and is superior to that of the LED base lamps, which elucidate the light evenly in all the lights.

Efficiency

For yes, compare the lamp for the tozi indicator, for good and use the proportion between light flow and power - light efficiency. Tazi characteristics are usually quoted for packaging 80 - 90 lm / W for ECL and 140 lm / W for LED devices. This diode source is superior to other kinds of crashes.

Stomach

Comparative characteristics

The fluorescent lamp has an operating life of 8,000 - 10,000 hours. Contrary to Comrade, you strongly depend on the frequency of switching on and off.This is for the sake of goodness, and not all of them are used in lamps with sensors for movement and in places for honest commutation (baths, corridors and similar rooms).

LED lighting bodies will last between 30,000 and 50,000 hours.

Dimension and view

LED lamps, forms View of the LED lamps

Public opinion is not exceptionally conservative and horata sa sviknali with the traditional type of lamp with a pressable lid: 14 or 27 mm base, torn-shaped crown. Please give the manufacturer a tryabva and all adapt to the consumer and the existing standard for the base / base. The main problems with LED lamps are the size: it is effectively removed from the toplinat from ICE to the right place, therefore, if you look for it, replace the usual light bulb with a brighter LED, so you should prepare it, so the size on the plate will be a little bit more naked.

The power on the ESL, in some cases, is given the length of the trebate, determine the problem with the format: the length of the tremble is necessary, and if it is bitten into a spiral or an ognata under the format for the letter U. Such a source for a bright light is used for illuminating the body with shutter nuances.

energy efficient, form on lampi Appear on energy efficient lamps

Operating temperature

fluorescent lamp, LED comparison table

Kolkoto in a high efficiency on the source, a little sensible for all consumers of electricity under the format for fuel.

This is the relation to the light flux of the power in the LED and fluorescent lamps, and it can be different from two to five, the lamp from the second type heats up a lot more. This parameter may be important for applications and lamps with charter lampshades, as well as when installing on a lighting device in close proximity to the tavan: such as frame panels from Armstrong type, non-combustible material, such as drywall, then use the LED itself in a good way lampi in proximity to opnati tavani.

Comfort and safety when using

As much safety as possible, energy-efficient sources of light will depend heavily on the quality of execution. The potential for harm can be estimated by itself tentatively: ECLs can adversely affect the functioning of the nervous system due to possible disruption, and many LED lamps have a significant decay and peak in the visibility spectrum. Once you use the original drivers, the LED device can be switched on and off.

In addition, kjm gornoto, pipe fluorescent lamps eat live, that is, it can be dangerous, if you damage it by accident. This one is directed away from the glass, compared again not in the crawl on the ECL - they are broken in the woods from the LEDs and the lighting is specially made from Khvarlyane.

Appreciate

Ahead of the next year, LED lamps can be slightly fluorescent, almost unambiguously determine the choice of the consumer: the use of diode devices is not much better. But for the sake of improving it on technology and masovoto slapped on the market on Chinese manufacturers, the difference in prices is almost gone. Comparison for the value and for the two types of lighting of the body showing the sadness itself in the segment for the background work of lightening and the third lightening in the crawl space on a fluorescent lamp.

back kjm sdzharzhanieto ↑

Advantages and disadvantages of LED and ECL

Offers for fluorescent sources include:

variety from shape and size;
low price for the right device;
svetlinnata effektivnosti petit hi-temporally from the pelvis on the lampite with a pinched chin;
the color temperature can be regulated through a wide range of phosphorus concentrations;
long operational life: 8,000 - 20,000 hours with normal quality on the mat;
scattered light.

ESL, predominance Energy saving lamps

Disadvantages associated with design characteristics:

the form is limited, which does not allow crawling on the mazeta in the Senki opening;
krekhkost on kolbat;
sdzharzhaniyeto on a zhivok, some izskva spetsialni grizhi at boraven;
high-quality lamps with unpretentious spectrum and low light efficiency;
treptene with low quality electronics;
razgrazhdane on phosphorus over time.

LED lamp outperforms fluorescent lamp ratios:

krushovidna traditional form, with mats nuance;
play pimp comparable to ESL;
light efficiency, two five temples from the basin on the energy shield and ten five temples from the basin on the lamp with a pressurized plug;
operational life 30,000 - 50,000 hours;
environmentally safe;
don't get dirty;
plastics, not a glass diffuser.

Preferences on the LED cruiser