How do you direct the LED phytolamp for plants
Title: Phytolampi 
For the development of plants, water and a tore, light is also needed. But sometimes it is seen as closed, especially prezimata, clarification is not enough. Therefore, they all need additional light. For tov se use fitolampi.
containment: 1. Influence on radiation at the top of the growth 2. Lightlining spectrum and negotiable characteristics 3. Characteristics on the lamp for lighting for seedlings 4. Direct yourself LED phytolamp 5. Buy or direct yourself 6. Price for ready solutions
The plants here need a defined spectrum of light, for growth and functioning. Depending on the commodity part it is necessary, the spectral composition can be changed.
Confessions for lipsa on lightlina in plant
Influence on radiation at the top of the growth
Lampite with a hot pot sa nai-little suitable for plants. There is a lot of yellow light in the spectrum on the lampi ima, which, like greenery, is weakly absorbing from the plant. Osventova tezi lampi will separate a lot of toplin, sometimes it can be burnt out for flowering or seedlings.
Chervenata svetlina ima positive effect of the top development on the klnov, ceftezh and formation on the ovaries. Lilavo and sinyo - narcissistic development of the root.
Variations in the light spectrum depending on the type of aurora
And two flowers are crawling in phytolampi. Depending on the task, which are in front of the owner in different periods for the growth of plants, the necessary relationship for flowering can be yes varia.
Lightlining spectrum and negotiable characteristics
Normalnata slancheva svetlina ima unpredictable spectrum.For the difference from tyah there was a lot, isolated from fluorescent and LED lamps, all from mixtures from different colors. Those swear by the plant in various ways:
- cherveno - accelerating the development of the seed from the seed, the formation of the flowering and scrambled eggs;
- portokal - nasarchava development on the fruit tree;
- yellow and green - almost swear by growth;
- lilavo and sinyo - stimulating the development of a stocky system and accelerating the beginning of the process;
- ultraviolet lightness in small quantities of inhibira svrchrastezh, but in golem doses causing fumes.
Characteristics on the lamp for lighting for seedlings
In determining the period for development, all needs from illumination with a different spectral composition will be sorted out. Phyto lamps made from LEDs with various colors, usually worm and blue or special, two-color or multi-color, with white and ultraviolet and LEDs.
Tezi lampi and iskvat vodach, which and regulate the color ratio and the quality of the brightness for lightness.
Direct yourself LED phytolamp
Prepare lampi and fitolampi sa get skypi. It is economically justified to use it when it is used. Behind the house, send a phyto-lamp with your own right at home.
Phytolamp for plants crafted from the following elements:
- LED;
- base or radiator for tyahnoto installed;
- driver for phytolamp or storage with dimer;
- gvkavi copper svarzvaschi conductors.
Selection on LED
LED VV Phytolamp
For a phytolamp, you can use four types of sources for lighting:
- LEDs, specially designed for the production of phytolamps. Those sales for the installed and imat opportunities for the regulation on the spectrum and intensity on the isolation.
- Bright LEDs with the necessary color, intended for installation at the top of the radiator.You can use diodes with low power, but you still need a lot of power, some more laboriousness for installation and complexity for design.
- LED strips in red, from length to shaft 630 nM and blue, from length to shaft 465 nM. Goods are close to need 660 and 445.
- RGB LED strip with RGB controller. If you don’t use green LEDs, then this is an option for production. Lack of loss in power and increase in length - in RGB tape the ratio is 1: 1 on red and blue LEDs, and in phyto illuminating bodies - 5: 2, 7:3 or simply 2:1.
Estimated for consumerate svetlina
Plants are in need of different amounts of light, as well as lighting from the bush. Depend on the species, season, location on the seer or greenhouse and other factors.
The average power on phytolampite is 40 W / m2 on pervasite on prozoreza, 80 W / m2 with artificial lightening and 150 W / m2 in cutite for growing (shutters of cutia, lighting itself from phyto lampi). An exact calculation can be sent through a consultation with a specialist or yes, you can find detailed instructions on a specialized website.
In any case, diode the lamp and shake it so that the arrangement is evenly distributed over the surface on the leglat or pervaz on the seer. The distance to the plant is 25 - 40 cm.
Calculation for drivers per LED
The brightness and ratio of this on flowering in the backlight at different periods for the development of plants and treabva will be exchanged for this. Understanding this, you can choose a low average cost and use conventionally stored, some voltage and power depend on the type of LED used.
LED driver
Possibility for regularization at all bloom separately, but the effect of the top of the plant is favorable.Tova is a chauffeur with suitable capabilities. Instead of a special device, you can use the regulation of storage, different for all colors. Initially, the voltage of the circuit breaker and the answer to the need for storage on the LED, and the power of the circuit breaker, yes, are selected from 20% more.
This ratio to worms and blue blooms is usually 2: 1, then save the block tremble and all distinguish one from the other in one and the same proportion.
Scheme on the link to the LED driver
The power on the driver is selected based on the total power on the LED.
Driver or dimerat can be replaced with a safe. For each group of illuminators, the installed switch is separated.
The main frame for the phytolamp
base for phytolamp
This housing for the phytolamp can be used from an old fluorescent lamp, plastic kutia or other handy materials.
Frame for phytolamp from old lamp
You depend a lot on the location on the installation on the device - on the pervaz on the seer, it is desirable to be bright and not in the eye on the horat in the flock and on the street.
Once you use the radiator, shake it and beat the hell out of it.
This item is especially important when connected to a 220 V LED led.
The size of the LED lamp is shaking and the answer to the size is on the hailstone. For effective use on svetlinata, it is desirable and foresee the possibility for regularization on phytolampata up to the height. You can mount it on a bracket, a rack, a friend of a jerk, or even mount it on a rack.
Plants under a philo lamp
Checking on the LED with a tester
Before installation, test LED for functionality. Tova tryabva and send it, for yes not se tarsi cause for the lipsat on the light track of the installation.
The LED is checking for the beginning of the cato ordinary diode - with a tester:
- when connected to the tester in one shoal, that trembling and showing zero resistance, and in the opposite shoal - endlessly;
- as it is multi-colored, togawa tazi the procedure for repeating it all blooms separately.
Checking on the LED with a tester
You can also test the LED for functionality by using the source to a constant voltage, which you will use an additional resistor. The cost of mu se is calculated with the help of the law on Ohm or any one from the online calculator.
The correctness of the LED tape is checked through the connection to protect the voltage of the stone.
Attach the LED to the profile
At the top of the radiator, the self-mounting LEDs are bright with a high power. Maybe yes, it’s from the use of a cato aluminum plate or ugl. Installation method depends on the type:
- with open for fastening - radiator with the help of a self-tapping screw or a screw with a washer and thermal paste;
- without a hollow - for a heat-conducting sculpt;
- LED tape all over with a molding layer from a back country, or with a double-sided tape.
Schemes on the wire
Install the wiring LEDs in series. Techniyat broy depend on the voltage on the source on the protection and samite diodi. In parallel with the LED, a current limit is mounted. The cost can be calculated with the help of an online calculator.
Groups from a few LEDs and a resistor, like sections from an LED tape, are connected in parallel.
Zapoyavane
LED light through soldering. A soldering iron with a power of up to 25 W has been developed, without preheating the diode.
For soldering, use kalaeno-tin solder and a colophon or other neutral flux.
Important! Do not use kisselin. Comrade can cause some connection or destroy the conductor.
You can use the connectors for the LED tape.
Properly used on LED body illuminators
LED lights do not pollute the plants, so they can and can position directly above them. The duration of illumination is determined by the season and the illumination of the culture. For example, limons, other citrus fruits and orchids light up from October to March.
It will be laid out, depending on the stage of development - the ratio is predetermined to blue - red 2: 1, the next - 1: 1 and within the framework of 2 - 3 days, the brightness on the light-colored se-namalava.
Buy or direct yourself
Necessity from installing on phyto-svetlina for the choir, which they hang for plants in the seclusion of space, without removal. The only question is if you can buy it or send it yourself.
Homemade lamp ima somehow predominance, such and lack.
home phytolamp
The main predominance is e, which is a lot of -Eutino from the purchased. You can buy LEDs and storage relatively Euthino, especially if you buy from Taobao or Aliexpress, use materials for the cases and radiators, and the owner of the plant has more lampata with your own mother.
But the main advantage is that it is a home product of ima and shortcomings, based on something that makes the spectrum different from the ideal, especially global from the Euthine component. In many commercial devices, these devices are much wider and are not only visible light, but also include a small amount of ultraviolet light.
Zatova e preposterously yes si send a home phytolamp near the house. With Tozi, ruin the approach for profitability, it will be insignificant.
The lamp has been purchased from the cloak itself for commercial use and production with a total volume.
Price for ready solutions
PredishnaLuminescent lamps How to choose the correct fluorescent lamps for plantsNextPhytolampi Is there any harm from phytolampite for horata