How to install PTF on a VAZ 2114 and change the brakes in ty
With every bad time, you are simply indispensable for the darkness, but, for pity, do not install home cars on everything. In the basin, we are still equipping the VAZ 2114 with a fog lamp (PTF) and in a short time we will teach you how to change the lamp in the tyah and premahvame nay-sorry malfunctions.
containment: 1. How to install PTF 2. Scheme on the wire 3. Kakvi krushki ima in a standard farov for mugla 4. How can we change the mug 5. Possible faults and start over by removing them
How to install PTF
In the first place, we’ll save some time and install PTF on the VAZ 2114. For tov, sort it out, we need it from the same farove and “ochilat” - decorative pleasure. Let's also take theses, which are intended specifically for mounting on the VAZ 2114. To save yourself from a lot of problems with mounting time - those are directed exactly along the armor. I choose the facing of the right color for the car, but there are no options, just try to buy everything and yes, please add to the service.
Farove for darkness on the VAZ 2114 and decorative nalagadiya for tyah
Purchase the following catogy, you can choose two options:
- Buy armor from VAZ 2115 with a vision for the headlights for the fog.
- Cut yourself these prozorci.
Kupuvaneto for armor, take it apart, it’s more stringy, but if you don’t see it or don’t become strong in your ability, it’s better to choose takava.
Armor for VAZ 2115 with prepare saddles for farove for fog
We will choose the second option - we ourselves will cut the prosorcite. First, dump the armor.Put it “with your face down” and try to get ahead of the darkness in the door, so that it’s perfect for armored along the entire perimeter.
Election to the locality for installation, such a farovete and passvat is ideal for armor
If everything is directed correctly, the headlights will still be located symmetrically directly to the center and there will be no charge and additional measurements will correct. Markirame location is on the edge of the vision, kato se focusirame is approximately the top of the glass on the farovet for the fog.
Hello! For forest markings, farovete can and can be attached with standard racks directly to the armor.
Headlight for the fog, fixed on the spot for the locality for the VAZ 2114
Premahvame the headlight and razryazvame see through, which from the use of the markings is convenient in every way. The author of the picture should be directed with a perforated trion, which preliminarily pierce the hollows, for a moment the point is shot at the trion into it.
Preliminary seer in armor on VAZ 2114 for headlights for darkness
You may need to re-fail, if necessary, scratch the dupkat with a clerical knife and a saw, but the very same thing that the PTF glass is not even covered with plastic.
Open in armor not shaking even a little bit from the glass on the headlight
Stay and adjust the dupkit directly in the size and on the decorative imposition. Roll off the farovete again and use a clerical knife and a saw. Do not be arrogant - dupkite tryabva and sa with such a size, so that they can fit in there, but let them not hang or hang a little.
Easily flatten the open for fastening on the farovet, so you screw it and sa “backwards” and let it not stop on imposing. For tov, yes, I used a drill with a goal diameter. If necessary, we rule vdlbnatini in the "eye" samite. Those (ochila) tremble and lay flat on the armor.
Install the farovete on the meat.Use fasteners to attach elements, fixing the frame, decorative coverings on the meat. At the Tozi stage, it was installed on the headlights for fog on the VAZ 2114, and it can be considered complete. Montirame is armored on the ground.
Farove for darkness, mountirani in armor on VAZ 2114 back kjm sdzharzhanieto ↑
Scheme on the wire
Now let's save some time and save the PTF. For this, we need an installation kit. In a good way, yes, use the “roden” for the VAZ 2114, which includes:
- electromagnetic relay;
- Bud for inclusion on PTF;
- mounting conductors from the substrate.
Installation kit for connection on headlight for mist for VAZ 2114
I also use the schematic diagram, sometimes and two from the kit and attach it directly to the top of the packaging.
Scheme on the link behind the PTF on the VAZ 2114
On the diagram, digits show:
- Farove for darkness.
- Mounted block.
- Relay for switching on the farovet for fog.
- The switch for the headlight for the mist.
Let's join the points "A" and "C" kjm "plus" for storage, "B" - kjm stored for clarification on the reinforcement panel. Now, let’s look at the wiring diagram on the VAZ 2114, here are some modifications on the VAZ 2114 and it’s necessary to cable, the substrate and dory the place for the plugs in the mounting block:
Wiring diagram on PTF input VAZ 2114
Schemata e is quite simple and almost everyone is the owner of the VAZ 2114, yes, I'm gloomy. In the first place, under the armor and the connection, conduct a lamp from the PTF kit. Raztyagame is one from the storage of the conductors to all PTFs in the compartment on the engine - here is the world's mounting block.
Mounting block on VAZ 2114 all over the world in the engine compartment
Tova may you open the door, save the cables behind the farovete. Svyarzvame the second conductor for all headlights from the compartment to the car, which I use the propeller for the fixed headlight.
Connected to the conductors of the PTF
Relay now. In a set of namiram, a sheaf of four conductors. In the unity of the edge of the block under the relay, in the other name of the knife contacts, which are mounted in the block on the mounting block.
Electrical cable on the relay for switching on the PTF
We choose the location for mounting on the relay and a suitable bolt for the product - there are a lot of fasteners in the compartment on the engine. Develop the bolt and tighten the relay under it. In a short time, under one and the bolt, the cable is captured by a sheaf, going from the 86th contact to the relay.
Fastening on the relay for turning on on the farovet for fog on the VAZ 2114
Now let's figure out how to cut a bud for turning on the farovet for darkness. Somehow it’s bleached in the mountain, all the necessary conductors and connectors of the evening are installed. Just tryabva yes gi intend. In the distance from the front of the headroom, there are two free connectors on the high speaker and on the back. Unity all due to control on the relay for switching on the PTF, secondly dissuaded for lighting on the butonite.
Izstiskvame splintered from the door, some se namira at low tide above the high-speaker, preminavam tamponite. With the name of the bud, kam tyah, put it in the nest and go to the creatures.
Installed on a button for turning on on a farovet for fog on a VAZ 2114
Now montage block. For yes, reach to underlay Sh7 and Sh8, and shake the block again. Vorzhavame se with wrenches and develop two nuts, remove the location on the block. Mestata, k'deto se amirat, whitening the arrows in the picture along the bottom.
Pre-machine on the mounting block on the VAZ 2114
Carefully pry the mounting block, screw it in until there is enough wire, and tear the pads Ш7 and Ш8 from the socket.
Pre-machine on the block for the connection to the relay and PTF (Sh5 block is removed for convenience)
Location and numbering on the backing sa socheni figurata along the length.
Numbering on the substrate on the mounting block VAZ 2114
Close the PTF blade and the relay in the block according to the electrical diagram (see figure on the mountain). In the carve, put it in the slot, mount the mounting block on the ground, fix it with the nut. Leave it and check for the presence of the F8 and F9 prepositions - they will excuse you for storing it on the farovet for darkness. Ako gi nyama (and nai-probably not sa), nie gi zadawame with a nominal value of 10 A.
Location on the front panel in the mounting block on the VAZ 2114
Stay and regulate the fairways for the darkness, so that the upcoming chauffeurs will not blind you.
Tova can be done according to the method described in the article “How to install farove for darkness on Business Gazelle". The only difference is farther than adjusting the screw of the world in a slightly different place, split off in the Kirzhach farovet, crawling into Gazelata.
Location on the screw behind the regulator on the PTF on the VAZ 2114 back kjm sdzharzhanieto ↑
Kakvi krushki sa in the standard mist for mist
Now think a little about the lamp, using the standard headlight for the VAZ 2114 fog. Depending on the modification to the PTF, the brakes can be used with three types of bases: H3, H4 and H11. PTF "Kirzhach" from crawl bowls with fasung H11.
Lampi with base H3 (clear), H4 and H11 back kjm sdzharzhanieto ↑
How can we change the mug
Razbrahme installation on the farovet, now we'll figure out how to change the crashes in PTF.The crushed e is exceptionally simple, the only thing is that you can crawl under the armor - either from the inspection pit, or even pump it into a literal sense of thought. Taka:
- Katerim here under the kolata.
- Izdarpvame humenata shoes are based on krushkat.
- Under the trunk of a namiram connector, a lampata is connected. Depending on the type of electrical plug, it can be heavy with one, two or three pins.
- Izstiskvame has a spring-loaded bracket, which is pressed against the knuckle of the reflector. The device was burnt out, the device was installed new in a new place.
- Fixirama lampata with a spring clip, svurzvame zakhranvaneto kam founded, put the trunk.
Smyana on a mug in a farovet for a mist VAZ 2114
Possible faults and start over by removing them
And last but not least, for typical malfunctions, which can cause damage to the PTF:
- Lumpy for the fumes... Promenete on new (see the section on the mountain).
- Anticipate damage.... Open the mounting block and check the preposition F8 and F9. If necessary, change to tabs for power output (10 A).
- Nyama negatively stored on lampata... Izkachvame ce under the armor, checking the conductor, connecting the PTF lampat from the car series to the car. Either it otksnat, or the meat on the tightened under the bolts on the headlight is simply oxidized.
- Without minus relay protection... Decoction the engine compartment and checking the conductor from the contact to the relay 86 km long. Either it otksnat, or the meat on the tightened under the bolt is simply oxidized.
- The connection is open or closed on the conductor, keep the PTF plug... In the second case, if you change it from the right one, the last one, the old one. Please check and store the conductors on PTF, namiram, eliminiram.
- Defective relay on the headlight… Change for hire, checking for you. Ako vsichko work, kupuvame new relay.
- The switch PTF is defective. Premahvama, obzhadame behold the tester, promenade.
- Nyama voltage on the 85th contact on the relay. Turn on the PTF, measure the voltage with the tester directly. Ako is not there, there is a malfunction in the mounting block.
At the same time, we can talk for a headlight for a fog on a VAZ 2114 car, and it can be completed. Now we know how to install them ourselves and, if necessary, how to repair them.
PredishnaFarove for darknessHow to install Farove for darkness on Business GazelleNextFarove for the darkness How can we change the mug for the darkness for Hyundai Solaris