How can we change the mug for the mist on a chevrolet cruze

Farovete in the dark, as you know, significantly paints the risk of incidents and makes the driver worse when the time is bad, so keep your eyes peeled for the farovete in the farovete for the mist. Thanksgiving on the Tazi article, we will teach you how to change it independently, turn on the headlight for the mist on the Chevrolet Cruze.

Containment: 1. What kind of lamp is needed 2. Rating on models and manufacturers on car lamps 3. What tools are needed 4. How can we change the crumbs 5. Other possible causes for a malfunction on the PTF 6. Research

What kind of lamp is needed

In front of the fog on the Chevrolet Cruze, the manufacturer installed a halogen lamp from the German concern Osram with a base of 35 W H8.

Headlight for the darkness, installed in the Chevrolet Cruze

Tova e H8 and no friend. Why? Let's analyze some experience.

What is the difference between lamp H8, H9 and H11

Externally and in relation to the geometric dimensions, crush with socles H8, H9 and H11 practically do not differ. It’s for the sake of owning a Chevrolet, it’s a sin to buy something and get the definition of a problem, so that’s what makes it different and significant. Examine the picture along the length.

Cover caps for lamps H8, H9 and H11

Distinguish between the basis of H9 is obvious - there are two keys on the edge and on the connector. It is simply not possible to put such a lamp into sockets H8 and H11. Ima is the only way out: go to the store and look for a replacement. You usually sell the item as a novelty, as the lampata is new, in packaging and with a receipt for the sale.

Pedestalite H8 and H11 look at the gangway, but if you look carefully, you can see two small keys in the horn, often on parvia. Cartridge H8, reciprocally, ima two zhleba. It is perfectly possible to put the H11 bulb in the dark. But there will be new problems. Look at the table in full.

Main characteristics on lampite H8, H9 and H11

Parameterlamp type H8H9H11Consumed power, W355565Consumed current, A2.94.65.5Storage voltage, V121212Created light flow, lm80013001500

From the horn, the table can be seen that the H11 lamp is almost two five times more powerful than the H8 lamp. Therefore, toy ima temple topplenos, some frightening melted on the optics on the farovet and dori pukvaneto on the glass at the temperature of the change. But ima and in a serious problem.

As standard, the cable is protected behind the headlight for the Chevrolet Cruze and is designed for a current of up to 3 A and a continuous cross section of 0.5 mm. sq. Installers lampata H11, pre-production cabled. The standard predpasitel, sort it out, burn it out, but don’t stop at nothing and install it like an investment. But there is a problem with the cable. Powerful flasks will preheat the insulation more, will cause more connection in caroseriata and will almost certainly predict a fire.

back kjm sdzharzhanieto ↑

Rating on models and manufacturers on car lamps

Dnes crusher H8 is produced by many manufacturers. Some of them shine brightly, others will wear out for a long time, and thirds of the sa are evtiny. Which one shall we choose for farovete for darkness, and according to what criterion shall we evaluate it? We don’t care about the technical characteristics, but we’ll also cut the tires with the H8 base from the popularity of the environment on the Chevrolet Cruze.

Mugs ss standard characteristics

Rating

popularity

Brand and manufacturer

indicative

price, rub.

1AVS H8-12-35 Vegas A78149S1002GE H8-12-35 530904503MTF H8-12-35 + 30% std belly x4 HS12083004NARVA H8-12-35 78162 from4505OSRAM H8-12-35 642124806PH ILIPS H8-12-35 Standard 12360C14507Xenite H8-12 -35 STANDARD 1007015908DIALUCH H8-12-35 PRIME 12358PR2609SUNRISE H8-12-35 8019115010LIGHTHOUSE H8-12-35 52820110

Xenon effect H8

Rating

popularity

Brand and manufacturer

indicative

Price, triene.

1AVS H8-12-35 + 50% 5000K Atlas450 per set 2EVO H8-12-75 SPECTRAS 5000K450 per set3KOITO H8-12-35 (70W) Other brand2000 per set4MTF H8-12-35 5000K Vanadium950 per set

Lampi from the temple of brightness

Rating

popularity

Brand and manufacturer

indicative

price, rub.

1DiaLuch H8-12-35 + 90% Megalight Ultra 12358PRMU750 per set 2SUNRISE H8-12-35 (PGJ19) Super Nova + 100%900 per set 3MTF H8-12-35 + 80% 4000K Argentum950 per set 4Clearlight H8-12-35 + 150% X-treme Vision700 per set

Choose, sort it out, leave the wines with us, but Ima understood and paid attention to the rating on popularity.

back kjm sdzharzhanieto ↑

What tools are needed

For yes, let's change the lamp in the farovet for the mist Chevrolet Cruze, we need from:

1. Bit Torx T-20.
2. Clean the pamuchni rakavitsi.
3. 2 reserve bowls with H8 fasung.
4. Creek (revision pit / climb).

You don't need special tools to change the bulb in PTF Chevrolet Cruze back kjm sdzharzhanieto ↑

How can we change the crumbs

It’s not possible that they’ll replace “one or two” on the Chevrolet Cruze farovete for the darkness, but in spite of this, almost everyone knows how to keep the tools in the game, you can do the task with the tazi.

And so, karame kolata in the inspection pit or crawl out the scream.Shut off the shuttlecock until the end to the headlight for the fog, lampata, we’ll change it in a different way. Let's bury a certain Fener from Levi. On the first place, miss the aerodynamic shield.

Dumped on the air deflector

With the help of the T-20 tip, develop the screws, which are often fixed on the knuckle and knuckle on the armor.

Facing on the front kalnik and kalnitse sa fasten with a single screw

Sgvame back kalfa on kalnika, kalnika and stigam to the rear often on the farovet for mist, from koito starchi it is based on an electric breaker with the supply of a block for protection. In the picture, along the valley of the lampat e, the arrow is marked.

Next kato bend the lining on the kalnik and protect against fouling, stigame to PTF lampat

Squeeze pinch on the block and get rid of the lampat.

Premahvane to protect the block from the lampat

I’m good for the base, I’m back on the watch arrow and I’m tired of the headlight.

Premahvane on the burnt out lamp

Slagame pamuchni rakavitsi (you can’t take a crucible on a halogen lamp with a burnt head!), Wear out a new lamp from a kutiyat, put me on a fire on a fire, fix me, I’ll turn on a pick on a watch arrow.

Protected electrical plug, installed anti-freeze protection, cladding on the kiln, aerodynamic shield on the meat. We correct the manipulations with the dyasnat headlight for the darkness, we check that it works on the PTF.

Installed successfully on a new lamp in Chevrolet Cruze PTF, everything works

Hello! In order to drop the aerodynamic shield and reach the PTF lampat, it is generally not necessary to turn the shuttlecock. Everything can be directed to any position on the knee, which is important when crawling to a scream - it’s not safe to turn the shuttlecock onto a stake with a scream.

back kjm sdzharzhanieto ↑

Other possible causes for a malfunction on the PTF

Malfunction on the lampat, sort it out, it’s best, but not the only malfunction on the farovet for the fog. Ako the trail has been changed to the PTF lamps, they still do not burn, togava cause it to be possible and badat:

I burned out the prepaid... Decoction of the assembly block, which is the name of the world in the engine compartment. Check the correctness on the preposition 48 (shot down), as necessary, and change it with the correct rating (15 A).

Numbers for prepaid and relays in the mounting block on the Chevrolet Cruze

The chain was opened in kabelevaneto, excused for the farovete for the darkness... Checking the kabelevaneto, reproachfully for the farovete for the mist, tarsim iztarkan or skasan conductor. However, it is not possible, even if you intend to point out the defective conductor, instead of it, it is better to use an additional one with a straight cross-section and must be special for automobiles.

Nakso kam tyaloto on kabelevaneto, reproachfully for the farovete for the mist. Tazi caused a malfunction, causing an explosion on the predpazite 48 (see in a mountain) and the trail was hushed up again, the last one was amusingly burnt out. Checking the cable, reproachfully for the farovete for the mist, we remove the conductor from the insulation wiped. However, it is not possible, but for all intents and purposes, to have a good connection, to exclude the defective conductor, instead of it, it is impossible to remove the section and must be a special car.

Oxidized or burnt on the connecting block… Check the contact on the backing on the headlight and in the mounting block. Those tryabva and sa clean and caress: without filth, oxide deposits or filth. If necessary, clean the fine sandpaper.

Such a razbrahme as a lamp and tryabva and install it in the farovet for darkness on the Chevrolet Cruze and if it is necessary, we can even direct it without outside help.

back kjm sdzharzhanieto ↑Maybe you are interested in Farove for the mist Which farove you choose for PTF: universal diodes or LED lamps Farove for the mist How can we change the muglat on the Ford Focus 2 before and after restyling? Farove for the mist How to lampi ima in the farovet for the darkness of the Ford Focus 3 and how to change it Farove for the mist How to install the headlights for the darkness on the VAZ 2107