How do you change the front and back from the size of the VAZ 2112

In the event of a malfunction of the lighting devices, own the vehicles for this service. Whatever the problem, and both can and will solve it themselves. In the basin, we will analyze the safety of the rear dimensions on the VAZ 2112, they will not burn out, and we will eliminate the faults ourselves.

Containment: 1. Kakvi lampi ima on VAZ 2112 2. Typical malfunctions and tyahnoto removed

Kakvi lampi ima on VAZ 2112

Ordinarily, before they stop and change the lampat, they preliminarily pay off the work. But for yes buy, tryabva yes you know what. For yes, do not loosen the lighting device, for yes, we will explain these problems, more from the use of the tabelata, in some cases, the choice of lamp types, including the page light, from the use of the VAZ 2112 car.

Type of lamp used in a VAZ 2112 car

Appointedlamp type PowerWhere can I buyLight line lengthsH155 cotton woolKasi light linesH155 cotton woolFront light lines for park running W5W5 cotton woolPrevious indicators PY21W21 WHeadlight for fogH1 or H355 cotton woolRepeater on the page flashersW5W or WY5W5 cotton woolRear indicators P21W21 WRear headlight for Fog P21W21 WSpiral signal P21W21 WRear light lines for parking laneT4W4 woolReverse signal P21W21 WLamp for registration number C5W5 woolAdditional spiral signalLED back kjm sdzharzhanieto ↑

Typical malfunctions and tyahnoto removed

So why don’t you measure the size? Ima have many reasons, but I’ll look at the thesis itself, which can and can be eliminated with your own hands and without special knowledge.For good, yes, believe it, it’s difficult to repair it for a specialist, for yes, don’t screw up the situation, somehow it’s a case. Reconstruction for us at the same time is difficult and difficult. What faults can you open yourself? Ima little from tyah, but te sa nay - often crossed:

• fire lampata;
• burned out the prepositional;
• contact on substrates or cartridges for oxidation or burnout;
• wear or koso connection on the cable.

Let's remember some and solve problems exactly on the list.

How do we change the old lamp

You don’t need tools for changing the rear lights on the VAZ 2112. Broth the back door, I’ll cut the fener namirame of the valve in tapiceriata.

Tapiceriata on the trunk of the VAZ 2112 I cross the fenerite ima clasp

Nie go ogvame and poluchavame access to the back of the road often on the back of the light.

Back part of the back lamp VAZ 2112

Squeeze the two keycaps on the fener.

Dskata on fener se hold from two rezeta for onslaught

And Izvadame dskata together with the lampite. Ima three from tyah. Nay-malkiyat was dissuaded for the page of the light line - the same markan ss arrow.

Dismiss the board from the lampite

Leko vdlbnahme lampata, I’m going back to the clock hand and I’ll get rid of the jerk. On the myastoto on the izgoryalata, montiram nova. Put a dskata on the meat, I zatvarya with tapiceren valve.

Crushed on prednaty page crusher

Prednit size se will exchange dori in the forest from the back. Decoction of the kapak and on the headlight on the headlight, do not burn in some page light, open the hatch on the lamp for the light line, shut off the kapak. Opipvame klyuchalkata from the bottom, onslaught I, sgvame kapaka on the mountain and freedvame furnace bravi.

Premahvane on the capaca on the hatch on the light line and page the light line on the VAZ 2112With an early version on the VAZ 2112, so in the kapak e montiran on the farovet

Under the hood, you can see a lamp behind a kasi light line with a block with a single shift and a dart on a page cover under it.

Page dzharzhach on krushka

To use a cartridge with little effort - you don’t need it, but use it nowhere and nowhere. That same thing is removed from the reflector together with the lamp.

Premahvane to the nest to the page light

The lamp was burnt out from time to time (it is not necessary but to say nothing) and installed a new one in the locality. Typical page size is W5W.

Smyana on the burnt out krushka

Put the cassetata on the meat, put the capak on the hatch, then put the staples on the fire and follow the shrakvame dolnata (new modification) or I’ll zavrtame the clock arrow, dokato spray.

Where is the intention of the predictor

Most of the time, the trace was changed to a lampata, size it up and they don’t work. Nai is a probable reason for the exorcism of the prepasitel. Those are located in the mounting block, and the semantic block itself is left from the water supply under the drive to the hydro-corrector on the headlight. Ima and bud for a capaca mu. The onslaught of the bud and the installation of the pad block in the river.

Luke on the mounting block se broth with an onslaught on the bud

On the VAZ 2112, byah install the mounting block from two modifications. Let's call a certain old and new. The "old" device looks like this:

Mounted block VAZ 2112 from the old model

Predpazitelyat F1 with a nominal value of 5A dissuaded for the page lightly. Please see the light line on the desnia board to protect the F11 from the previous power supply.

The "Novoto" device is also seen as follows:

Installed block VAZ 2112 from a new sample

For the page of the light line, they will dissuade you from eating the power supplies - F1 (Leva country) and F11.

Ako everything else failed - how can you check the cable and contact

So, light it up, predict it, but the size is still silent. Let's continue and continue according to the list of contact oxidation imam, backs, ako nyamame kasmet, kabelavane.

Scheme on the link on the page lightline

First of all, you are busy with contacts and even more cabled, look at the electric wire for external lightening of the VAZ 2112.

Electric rope for external lighting VAZ 2112

The diagram is quite simple and in it you are interested in yourself from following the positions:

• 1 - predni size;
• 8 — back dimensions;
• 3 - Mounted block with prepositioners F1 and F11;
• 4 — the key for external lighting.

Dory work in the woods, out of the woods: turn on the switch 4, beforehand, after applying the pre-installation block 3 km, page the bright lamps 1 and 8.

Substrate test

Spread the diagram of the ima 4 connecting the block in the storage of the chains on the page of the light line on the VAZ 2112: 4 in the lampite, one in the mounting block (Sh2) and one under the hood - in the storage of the chains for the intended part of the size. Plus two rounds in a prednit size. Let's check again, dissuade the lamp from going out. Let's bury some from the fener. Razglobyavam go on the beginning of the beginning, somehow razglobyavahme for change on the lamp (see on the mountain).

From the right of the block from the lampata, check for you to contact mu, somehow contact the colleague in the lampata. Those tryabva and sa clean and caress. Without oxidization, zarsyavane, moisture or filthiness. Loss of contact can cause dori fini oxide deposits. Let's open it, let's eliminate it. From the right size, and check the contact for the patron. Clean up as needed.

Important! Clean up the contact on Fenerceto with the Student Guma and in any case with the skin! Contact on tosi block sa many tanks - not a lot of “cleaning” and yama yes badat. Taxata may be ill.

Sega cartridge e vv headlight. Razglobyavame after eating the beginnings, somehow when crushed into a krushka. Izvadama krushkat, razglyame contact on the patron. We see a confession on the oxidizer, clean it, but it’s better just change the cartridge. It's still safer.

Block left on the mounting block (module). That se namira in the valley is often used for the device, and then it’s more shaking and dab de dismantled. Press the button behind the closing, and then open the gate on the mounting module (see the section “Where to set the prepositioner”). Use a Phillips screwdriver to loosen the screws that secure the block. Premahwame lentata.

Felted for mounting module 2112

In the device and go back, the receivers have access to the substrate.

Mounted block from the country to the shoe

Interestuvame se from block Sh2. Namirame go, kato se focusirame top of the picture on the bottom.

Relative position and numbered on the substrate in the mounting block VAZ 2112

Izvadama, checking you, contact the block and the block itself. Clean up as needed.

Check for cable

Ako cleaned up on the contact was not helpful, togava is the only thing, we can still send something, but let's check the cable. Vorzhavame is a tester, capable of measuring resistance. Zadavame nai-niskata the border on the measurement, usually stotici oma.

Disconnect the Sh2 block from the mounting block, keep the chain on the car and there will be a glove.From the second sonda to the contact on the block, dissuaded for the desired lamp:

• behind the gums page marker - pin 9;
• zaden lav - shift 5;
• predna dyasna - shift 10;
• predna lava - shift 21.

The device is a ripple and shows the resistance to the verigata from the order of 30-40 ohms (resistance to the windmill). Ako showing the boundlessness, kabelevaneto e preksnato. Ako 0 - closed behind the weight. Ako Imame, the last two cases, carefully check the cable for you, for some reason the lead from the Sh2 block to the mounting block is a defective lamp. In this case, depending on which lamp is switched off, we pay special attention to the color conductor:

• back of the gums page marker-red-kafyav;
• back lyava - yellow-red;
• predna dyasna - kafyava;
• prednata lyava often zhulta.

Nay - probable places on the triene and schupvane sa pass over the weight and ribs mu. Namirame - eliminirame. But we will not intend to, from the elimination of defects, hvarlyamenov for the protection of the colony.

Car conductor

If the multiplier shows normal resistance, then there is a problem in the mounting block: either the relay K1 is defective (the new version on the mounting block K4), or the wiring is messed up. Ako ima is enough knowledge, ne razglobyavame and correct. Ako no, otivame in a car service or with an electronics engineer.

Such a breakdown of the main faults and the methods for removing them from the page of the light line on the VAZ 2112 car. Now, in any case, we can even deal with the problem ourselves, without wasting time and betting.

PreviousChange to automatic lampsNextChanged to automatic lampiFord Focus 2