How can we change the badges in the scoreboard to the VAZ 2107

For yes, change the lamps in the lighting devices on your car, it is generally not necessary, but go to the service and pay for a highly qualified specialist. All operations can be twisted and twisted independently with minimal effort and go. We are talking about changing the scoreboard (PP) for the VAZ 2107 car.

Containment: 1. Location on the lamp on the valve panel VAZ 2107 2. Dumped on the reinforcement board and preparation for crushing 3. What kind of lamp is needed 4. Changed to control lamps and lamps with backlight 5. How yes direct the arrows for the underlined ss own sir

Location on the lamp on the valve panel VAZ 2107

Before that, we’ll borrow from a crumpled on a crock, we’ll see somewhere a se amirat on a scarf for printed scarves and for highlighting or suggesting for some reason they will dissuade you from VAZ 2107.

Registration on the lamp on the scoreboard on the VAZ 2107, somehow:

1. Nivo on high.
2. Illumination on devices.
3. Turn on the indicators for the sling.
4. Malfunction on the controller for the control of the engine.
5. External lighting is not included.
6. Accidentally pour on oil.
7. Ruchnata (rchna) spiral is not included.
8. Farovete for the services of the light line and turn on.
9. The indicator for charging on the battery.

back kjm sdzharzhanieto ↑

Dumped on the reinforcement board and preparation for crushing

For yes, change the lamp on the scoreboard, the last more tryabva and bdat bastard. It can't be that PP is moving away from the market: the designer on the VAZ 2107 is a little more difficult to dismantle, split off to other cars from the VAZ family.Regardless of the product, it can be dismantled on a printed handkerchief and it is possible to go directly to the garage and dory to the parking lot. In this time, the operator is not a specialty of knowledge. No tools needed:

• small flat screwdriver or knife;
• screwdriver with a cross head.

Thought, what can you do in the trunk for all the VAZ 2107 and it’s still possible and continue. First premahvame plastic drags from kopchetat for heating control, for some gi rpvame with a flat screwdriver.

Premahvane on the move from the vtreshnat

Developing a haykat, fixing a bud for a nullirane on a daily broyach (markiran from a red arrow), and pushing a samiya bud into a shield.

Premahvane on a bud for a nullirane on a daily broyach

Now tryabva and develop a screw, some se namira under the chips and fixing a decorative ribbon. From the cracker with a flathead screwdriver, develop the Phillips screws.

Locking screw on decorative PP tape

The trace of the Tasi operation is located in the country on the panel far away, so you can reach the control shaft on the speedometer.

Liberated in the dyasnat country on PP on VAZ 2107

Valt se svalya with the naked eye: just develop the nut, some kind of fixer.

Premahvane on the slider on the speedometer

Now you will get rid of the armature panel from the key-alkat, which is a fixer for the country’s lyavat, and you will jump easily, for that you will get access to the vacuum markuch, connected to the iconometer. Maybe yes, it’s over and with a naked eye, but pay attention and don’t say it.

Premahvane for vacuum markuch from the iconometer on PP

Leave and disconnect three connectors for storage on the scoreboard and three conductors for the switch on the VAZ 2107 stove.Before you turn it off, it’s disgraceful to give it to the mark, for yes not to object when it’s slumped on the panel.

Protect the conductors from the pre-switch to the heater

Izvedame decorative tape together with PP and develop four self-tapping screws for rafting (two for everything, as well as markers with worm arrows) for decorative tape and scoreboard, you can put them off.

Premahvane on PP from decorative coating back kjm sdzharzhanieto ↑

What kind of lamp is needed

Before you destroy your VAZ, I’ll take it to your nearest auto shop and save it from the new ones. But which ones do I buy? Shooting by image quality, backlight and indicator lamps and various sizes. The choice is simple: once the backlight goes out (position 2 in the photo taken), you also need the AMN 12-3-1 (T3W) caps. Ako e indicator, togawa A 12-1.2 (Wl, 2).

Lamp for clarification on the scoreboard VAZ 2107 with and without cartridge

LED mugs

If you already know that you can change the caps in PP to your VAZ or simply change the modern setting, then you can install LED caps instead of the cap with the button pressed, this is how the industry produces and how to change the size, base, cartridge and working voltage.

LED lamps for lighting on the scoreboard (clearly) and indication for the car VAZ 2107

Important! The indicator for charging on the battery cannot be changed to LED - the battery is not and it is charging correctly.   

back kjm sdzharzhanieto ↑

Changed to control lamps and lamps with backlight

Put the reinforcement panel VAZ 2103 on the top with a smooth surface “from the face down” and see the backlight and indicator lamps (see the image above).Nadyavam behold, why go ahead and skip the armature panel, you dismantled which lamps were burnt out and, as you crawl up the mountain, you added a new type from necessity. Somehow, in a bad way, Illuminate can yes they sell ss or without preparing for the installation of contacts.

The lamp can be attached from the cartridge, but it can be removed directly from the back of the country on the VAZ 2107 valve panel (on the picture of PP on another VAZ model)

Ako sa purchase a lamp from a cartridge, then it’s enough just to install a new one, replace the burnt one and yes I fix it, which I turn on the clock hand. If the krushkata was not purchased without a cartridge, then remove the burner from the cassette, install it again on it’s place. The lamp was removed through a gentle push and turned back on the watch hand.

For yes, get rid of the krushkat from the nest, cha trembling and veil tight and veil 90 degrees

The next step is to install the cooking kit for the krushka on the negovo place. Leave and put the PP on the ground, then you will not take it away and you will save 3 connectors, 3 conductors for the switch on the heater, slide on the speedometer and vacuum markuch.

back kjm sdzharzhanieto ↑

How yes direct the inscription on the arrows ss own sir

Ako look for and send the backlight to the computer in an interesting way, you can experiment a little. I offer one from the options for the backlight for the VAZ 2107, spored men, nay-efektnata. For yes, implement the idea, check out the tryabva:

1. Conventional indicator LEDs bloom with desire in the light.
2. Resistors (on a LED diode) with a nominal value of 550 ohms.

First tryabva and shatter the reinforcing board, for yes you will reach the pre-nat country on a scarf.Solder the kjm resistor to all the LEDs and fix each deuce along the outer perimeter on the armature panel with a gun for molding or sealing.

Connecting the cathode wires to the LED and separately the wires of the free conductor to the resistor with participation from the conductor. Next to the premahvame, standardize the caps for the backlight and the conductors of the conductors, conductive contacts on everything from tyah - from the resistor to "+" is stored, from the resistor - km "-". The diagram for linking to highlighting is as follows:

Scheme for connection for connection for home lighting for showing for VAZ 2107

Kolkoto more LEDs are used, sensible - brightly and evenly more illuminated on instrumental luck.

Now you know how to replace the backlight and indicator plugs in the armature display for the VAZ 2107 car and, for sure, you can do it yourself with these problems.

PreviousHow to change a lamp on a carNextChanged on a car lampiLighting on a budonite on a stove and scoreboard on a Renault Logan