How to install and twist angelic eyes on VAZ 2109

angelic eyes - One of the options for setting, some of it is in giving individuality to the car through the use of a special light source, mounting in a standard headlight on the car and directing it to the right size on the light. Angelic eyes on the VAZ 2109 are available and the option for automatic tuning is popular, for some reason you allow and exchange a radical look for a car, for example, use some factory, and work on your own products, for which we say in the article.

Containment: 1. Point your own angelic eyes at the girl 2. Prepare solutions 3. Vrazka kam kabelavane 4. Legality on installation

Point your own angelic eyes at the girl

For the sake of strong lightness on light, use on tosi is an optical element and allow you to direct the kolata, apparently at a loss of visibility and for tosi, start and draw a broy on the incidents on the pitya. In addition, Angel Eyes can use some of the daytime light lines, some of which start painting on a burgundy background on the car and stretch the belly on the lamp for the light line.

Once you rule angelic eyes with your own si ryce, all using a standard LED strip, mounted on top, the base is prepared or separate LEDs, put in a plastic tube, ognata to the required diameter.

Angelic eyes VAZ 2109 from LED tape

Tarseneto on car optics, using LEDs, should follow the following characteristics:

long exploitation belly;
resistance to vibration and mechanical stress;
the ability and the need for a light stream at a low electrical power;
working voltage on the LED corresponding to the burgundy voltage on the car, some of the rules are forestry for the connection.

Important! Sometimes use the LED strip, even more rarely on special places, bleach on the surface.

Once you use the LED strip, the work is done on a round base, corresponding to the size of a headlight on a car. For goods, there may be some material (plastic, electrically cardboard, etc.) from which the foundation is scarred. The trace of the used tape is se zalepva and the conductors are not connected to the electric chain on the exalted means.

Izpolzvane on bloom, different from byal Used on Angel Eyes in bloom, different from bully, can be brought to the globe and taken away for exploitation on an excellent tool.

In the case of using a separate LED for a twisted job, here's the shake:

transparent plastic pipes or wires, long enough, but form a circle with the necessary radius. For VAZ-2109 commodities 400-450 mm;
stranded copper conductors with a continuous cross section of 0.5 mm2 (PV, PGVA or NV);
colorless sealant.

For yes, finish the work, check the trebva sesoar, the pistol for the mold and tongs.

right angelic eyes One from the option for the right to angelic eyes

Work all perversely in the next sequence:

When crawling on plastic shoes, the last thing is to heat up the seshoar behind the fence, some of it will cover up to the given diameter. For the formation of the necessary diameter, they can use all kinds of objects with a round shape (container, tenjer, lampshade), which size will correspond to the necessary value.
The trace of the cato gyrus will turn around and when crawling on the pipe - cut off the trace of the catogi, pack it clean. Next to the top of the surface on the workpiece, cuts under the format are cut into cuts from the long side to the middle on the diameter. Cut in the direction of the mortars from 2.0–3.0 mm.
The preparation is made by using 2 LEDs, the arrangement of a single cross-section of each diameter on the product.
Connected to a tube and mounted on an LED for sealing, for some reason the seal is transparent.

Important! When heating up on a trebate, there is no need to allow it to be warmed up, ty katotova leads to death on physical properties (as a cost, formation on a mehurchet, etc.), something else is impossible to use on a detail in the future.

eyes vjv headlight VAZ 2109 Direct yourself angelic eyes in headlights VAZ 2109

The product is prepared by placing it in the headlight of a car. One from start for supply on the product:

protective glass on the standard source on the bright line of the dismantler;
direct your angelic eyes, they will put a vvtreshnoto space on the headlight and behold, there is an external contour on the reflector;
mounted protective glass, fart e mounted on a car.

Important! If you dismantle the protective glass, then you can damage it forestry and damage it, do something when it’s damaged for work, try and keep it in reserve, and replace the damaged one.

back kjm sdzharzhanieto ↑

Prepare solutions

Introducing tarseneto to tosi view tuning to car pazar in our country with the idea of preparing solutions for tosi element from car optics, including models from the VAZ series - 2108, 2109 and 21099.

Factory made farove with angelic eyes

Tuning fart is a standard lighting device, which allows you to change a single product with a friend, either in a service center or on your own.

For information! Ima three types of angelic eyes, produced by different technologies:

CCFL technology - gas discharge optics:
LEDs under the format on separate light points;
COB technology - LEDs that shine evenly on the surface of the wall.

Modeling, directions according to different technologies, can and all differ according to some characteristics, such as cohatogi cupuvate, trebva and pay attention to theses of value.

The main indicators on the test, referral according to the CCFL technology, and the readings in the following table:

Index

Characteristic

Prusten type (technology)

CCFL

The light is blooming

It was cold (5000K)

Broy sorry vv headlight

Diameter on the wall, mm

70 and 80 (2 each)

Add. elementite

2 blocks per zapalvane

Electric power, W

2,0–4,0

back kjm sdzharzhanieto ↑

Vrazka kam kabelavane

A good solution for installing on tuning equipment, yes, you can join a certified car service, which will somehow avoid problems in the future.

The following video should be shown how to direct your angelic eyes to your own right and yes, swear the device for setting it to lightening:

Used on a factory made headlight Used on factory made headlights, it is a very acceptable solution when tuning to a car. back kjm sdzharzhanieto ↑

Legality on installation

Tozi the question can be divided into two sections: used for factory-made headlights, equipment with angelic eyes, and headlights for damage.

In the first case, yama da ima, ask the representatives of the regulatory authorities, ty kato takiva se produce in accordance with the regulatory investigation and kato rule of certification.

You may ask questions about the optics on the car, changed from you. In accordance with the regulatory document and farovete, it is white itself, and not all the others bloom (black, green, blue, etc.), some of it is a tryabva and this is foreseen, sometimes it is a perversion of independent work.

Tryabva and all whiten, that such a thing was washed into standard optics is not a strong violation, but blooms in the light like a dissuade on the furnace of research. Contrary to your friend, if you drive a car, you are set up to own your own, try to prepare for asking for an inspector on the CAT, and dissuade them competently.

Setting on the Farovet Tuning is voluntary, but tryabva and direct it wisely, for yes not se provokirat inspectorate on CAT

In conclusion, otbelyazvame, che crawled into angelic eyes on the VAZ-2109, giving tozi a model of individuality and ability, and opening the general flow from the exalted means. But those tryabva and this will be applied reasonably, without and this is prekaleva, for not doing this, it is unnecessary to ask from the control organization.

Predishna Decorative lighting and tuning Next Decorative lighting and tuning How to direct and install angelic eyes on the VAZ 2106