How to direct and install angelic eyes on VAZ 2106

Prez the last years of t.nar angelic eyesspolzvani kato dnizhny svetlini, se prevarnaha in a lot of popular scenery for underlined on the image of the owner of the car. But for regret, not all models and brands of cars are equipped with tyah vbv fabrication. Let’s look at it as best you can and direct it yourself and install angelic eyes on the VAZ 2106.

Containment: 1. Direct yourself angelic eyes on the pole 2. Options for Prepare Modules 3. Legality on installation 4. Video

Direct yourself angelic eyes on the pole

Ima have a lot of options for working on angelic eyes for installing a headlight on a VAZ 2106, invented by a motorist. We’ll bury some with nai-simple and nai-budget.

How yes si direct two LED angelic eyes

For yes, direct the structure to the structure, and follow the material:

1. 8 LED lights with a diameter of 5 mm with radial conductors.
2. 4 resistors with a resistance of 2 kOhm and a power of 0.25 W.
3. 4 circles from transparent organic glass with a length of 50 cm and a diameter of 8-10 mm.
4. 4 new glasses from the headlight VAZ 2106 - 2 long and 2 light lines.
5. Sealant
6. 12V voltage regulator is protected by the LED.

Materials, which are necessary for directing forgive angelic eyes

Prepare the following from the instrument:

1. Hacksaw for metal or boards from it.
2. Two ticks.
3. Kr'gl dornik with a diameter of 104-110 mm (two hundred grams of kutia soluble cafe is ideal).
4. Golyam tigan or tenjera with roaring water.
5. The gun was woefully sculpted.

Ako everything is ready, togawa you can save it.Stomp the prachkata in the vryashcha water and the old bowl of omekne, with two tongs I will see about the pre-preparation of the dornik.

Work on the wall for angelic eyes

Cool down the trace of the kato, cool it down, I’ll get rid of the dornik and cut off the edges with a hacksaw, so there’s a 5 mm distance between the ties.

Izviti blanks and completed thank you for angelic eyes

Now there are two openings with a diameter of 5.5 mm and a hole of 7-8 mm in the edges on the prachkata. For yes, install LEDs in these holes, use any transparent nitro-lacquer - not only fix the sigurno semi-conductor, but also direct the wall on the dup kit smoother and therefore more transparent.

Solder in parallel with the LEDs and solder the conductors from different color blocks: otherwise, the polarity is supported when connected to the structure of the burgundy mesh.

Know in advance the polarity on the semiconductor conductors and the gypsum, so after the installation, conduct on the anode and cathode and may cause soldering.

Opening to the edges on a trbat and an angel's eye with a LED mount

Leave the last finish: tiles (0.5 mm) packaged according to the tsyalat length on the wall with an interval of 5-7 mm. Ako pervert all the misfortunes of operation 4 five, then we can suppose that you prepare angel eyes for the installation in the farovet.

Szdavane for cut and prepare angelic eyes for VAZ 2106 at work time

For yes, send the comrade, farovete more trjabva yes bdat premahnati and stakloto varhu tyah, entwined with parsali, it’s chupeny - foresty, otkolko and otkasnete stakloto from the sealer’s trays.

Go ahead and feel the glass, don’t take it away and see which ones are bright for a long time and which ones are bright for a long time.

Put the angelic eyes in new glass with a cut on the glass and gi zalepte with a gun for molding or sealing. At a certain time, the hollows in the gornat are often on the reflector: if you start, save the conductors there. Once the seal is sealed, smear the edges on the reflector and the glass is good, a trace of something is squeezed tightly together, until the seal is fully stitched. You can spit it out so that the splatter is not a glass, but a reflector, but in this case, use a sealer, this kato toplinniyat gun is powerless against the goals and the studen metal.

Sglobyavane on the headlight Angel Eyes

Leave and install farovete on the ground, without and barkate far away from your loved ones, and let the scheme be simple:

Scheme on the connection to the angelic eyes for the VAZ 2106 km burgundy mesh through the stabilizer KR142EN8B

The circuit board is equipped with a small radiator or fixed directly to the vehicle.

Angelic eyes on LED strip

These angelic eyes look much more efficiently than the previous design, but, sharply and even strangely, it’s not so difficult to work out. For the Tazi version on DRL (Daylight Lines) you need to follow the materials:

1. LED strip (SL) was shining (2 m).
2. 4 plexiglass fasteners with a right section (8x10x500 mm).
3. 4 new glasses from the headlight VAZ 2106 - 2 long and 2 light lines.
4. Sealant
5. 12V voltage regulator is protected by the LED.

Use the necessary tools for the previous design: a hacksaw for metal, two tongs, a mandrel with a diameter of 104-110 mm, burning water, a gun for sculpting.

You will direct the wall at the beginning: heat it up, jump in the boiling water and fire the fire at the top of the dornik with two tongs:

Work on the wall for angelic eyes

Cut off excess stitches. As a result, you will get something like this:

Prepare to pray for angelic eyes for VAZ 2106

Now tryabva yes fixirate LED tapeta vvarhu tezi pristeni. Suitable for any width up to 8 mm for 12 V there was a radiance (color DRL more provokirat problems with CAT, but better for goods in the valley). For example, a ribbon, sglobena up LED 5630, 5730, 2835 or 5050 is monochromatic, but the latter is a little longer.

Cut 4 parchettes with the necessary length from the tape (for sale in bobbin from 5 m), but don’t take it, but cut SL along the top of the section (for all 3 diodes). Ako parcetata will have a little more than necessary, a lot of problems - tapeta can be fixed at the top of the wall in a little pokrivana. Openings around the circle are unpleasant for the effect on the angelic eyes.

Prepare a thermal gun and put the SL on top of the wall with LEDs and glass. Leko ogvaiki lentata, I'll spit from the point of k'm prusten. The dots can be placed at all times between the LEDs. As a result, on tova you get something like:

5050 tape stuck behind the wall

In the picture, the SL is stuck in the gore, but the product is an optical illusion. The entirety of the tape is stuck behind the bottom on the wall with LEDs and glass.

Once again, read the tape, be careful and work without fanaticism. Toi se ogva is weakly in the page, but all the same, se ogva. Ako SL nabbne nyakde, leave it ready - nyama comrade and affect the quality of the spy. In the opposite case, you can damage the wiring, and the parcheto tape is still damaged.

When you sing, conduct the SM SL, which reverses the polarity (it is placed on the tape when the substrates are in contact).Vsichki other operations sa kato in the predishnata construction (see on the mountain). Get rid of the headlight, knock down the glass, close up the wall with a pistol or sealer, knock off the headlight and put it on the ground. The diagram on the link for the spy's theses is also seen as follows:

Scheme on the angelic eyes, sglobena on the LED tape

And this is how the result of the completed work is seen:

This is how the angel eyes look on the LED ribbon of the day ...… and last night back kjm sdzharzhanieto ↑

Options for Prepare Modules

If you don’t look for it and take it from the right to angelic eyes, then you can use it and prepare food, they sell it. Nai - popular sa:

1. Gas Discharge (CCFL).
2. Groupirani.
3. LED.

Gas discharge

Those are conventional luminescent tubes, directed under the format on the right side. Ty kato takiva trbbi issquat high voltage and zapalvane, kjm stenite it is turned on hanging the converter system behind the starter (inverter).

Angelic eyes with gas discharge

Cluster

These eyes are on a solid base, on top of which an LED matrix (COB technology) is applied, directed under the format on a radial spiral. These eyes are protected from 12 V and often the 12-volt stabilizer is turned on.

Clusters of angelic eyes, using COB technology

On SMD LEDs

The design on these spy devices is similar to those that are used when working with LED tape on top of SMD diodes. Save it from 12 V; a stabilizer may be included in the kit.

Angelic eyes on SMD LEDs back kjm sdzharzhanieto ↑

Legality on installation

How long is it legally self-installed on angelic eyes and are there any problems with CAT? Angelic eyes for a view of the daylight and, therefore, search for kum tah sit down and eat:

1. DRL is included with or instead of the light line and is excluded when the light line is turned on for a long time.
2. Bloom on the front of the light, different from the farovete for the mist, the trembling even beat at any color temperature, from heat to icy.

Okazva behold, can you put white angelic eyes? But ima still one nuance. Ima razporedba “For the inadmissibility of exploitation on a vehicle with the installation of diffusers and lamps, which is not foreseen in the design on the lighting device and tyahnat optics” and the phrase: “Operation on the transport of means with a change, which is not foreseeable from the design is taken away.”

So you can't? Possibly, but just change your direction from the minister to specialized services, which are subject to the compliance of licenses. According to the beginnings, by installing your own work of angelic eyes, take risks and ruin not yourself, but also the rightness and manage the excellent means for a period of six months to one year.

Vznikva ask: why do they sell togawa? They sell a lot of things: devices for jamming on mobile phones, eavesdropping, whistling pistols, able to collect brontosaur ... The sale of the battalion and the purchase is not taken away, but use it at your own risk.

Tova, maybe bi, e vsichko for angel eyes. Aco ste read carefully tazi article, you can forestry and direct your own setting on the headlight, kato direct and install tosi the original type of daytime light line in ty.

back kjm sdzharzhanieto ↑

Video

PredishnaDecorative lighting and tuningNextDecorative lighting and tuning How to install Angel Eyes on Prior