How and how independently install the reflector on the headlight

Title: Decorative lighting and customization

Over time, the vehicle is gradually worn out and overworked on various structural elements. Tova is for the engine and transmission, system for storage and lubrication, as well as the device for control and lighting on the car, regardless of the brand and brand of the manufacturer.

Containment: 1. Protect the reflector on the headlight dimming 2. Dismantling and razglobyavane on the headlight 3. Methods for recovery 4. Video

Repair on the farovet, namely, install it on a reflector, it’s a topic on a tazi article, we’ll show you how you can and pervert the tazi operation with your own raw material, which you use various materials.

Protect the reflector on the headlight dimming

All modern headlight equipment, some of the design including several types of reflectors: parabolic, bifocal, confocal and polyellipsoidal.

The reflectors on the headlights vary in shape and material, as they are used during production.

Regardless of the design for a bright device, at a given moment the reflector can be darker and therefore start and improve the quality of work on a car.

For some reason, for the sake of a certain reflector, the headlight dimmed, maybe even a little bit of a hit:

• violation of the hermeticity on the hulls on the farovet, as a result of some moisture in the air in the outer space, some of it from one's own country to the damage to the reflector (oxidation, damage to zurnestost, etc.);
• mechanical damage, causing from the outside of influence the vrhu is an exalted means;
• Significantly change the temperature for airflow, which will negatively affect the top structural elements on the optical device.

For the sake of the fact, that the presence of a properly working optics determines nothing on safety points and conditions for trouble-free operation on a car, do not work and postpone repairs on the reflector on the headlight. Tryabva and all the perversions are possible very soon from the moment on the curve to the fault.

Single from option for damage to the reflector on the headlight on the car

An optimal solution to problems with food and even if you have a specialized service, where it still needs to be damaged, the necessary repair measures, before the headlights are damaged, if necessary.

However, if you have free time and the opportunity to work on your own, the breakdown can be corrected by itself.

back kjm sdzharzhanieto ↑

Dismantling and dismantling on the headlight

For yes, restore the damaged car headlights, the shaker and be dismantled, the trace of some kind of optical device was removed and the shaker was broken and repaired.

With different brands, the cars are fixed to the optics, all of them are in a different way, for some reason they are dismantled on the headlight and all of them are perverted in accordance with the instructions for the operation for a specific model of the vehicle.

Once the fart is dismantled, you can bury it and break it down, for that trip, and separate the protective glass from the tyaloto to the lighting device.

Fastened to the protective glass with metal staples for the time being, the funds are almost never used

For your information! In farovet, for the sake of antiquity, remedies for old modifications are used by a mechanical method for fixing on a protective glass.In the modern model, it is fixed all the way on the base on the seal, with the help of some kind of protective glass, the housing is stuck on the headlight.

Ako fart from a mechanical version for fixing on a protective glass, for this dismantling, fire metal staples and then open the headlight, which is still installed.

If the protective glass on the headlight is sealed with a sealant, then it is necessary to use the construction equipment, and it is necessary to flood the joint onto the housings on the lighting device and the protective glass and seal on the sealant, separate the structural elements.

back kjm sdzharzhanieto ↑

Methods for recovery

A trace of an adventure on a razglobyavaneto vznikva ask how yes install a reflector on the headlight with your own right?

Every owner of the car has given his own answer to the question, consider individual abilities and the availability of materials, with the help of which you can and repair the damaged reflector.

As a rule, sometimes the work itself is distorted, all materials are used, such as scotch and folio with metal coating, chromirane of the battle and the film is staring.

Vsichki methods for recovering and opportunities for perverting to work with tyahnoto from crawling around the table for a long time.

thixo

Metalnate (aluminum) tape is a building material, which is a polypropylene tape, from one country a stucco layer is applied to another, and from another - a metallized layer.

Repair on a reflector with metal tape

Installed on the reflector from the metalizirana, the molding tape is perverted in the following sequence:

• the surface on the reflector is free of oil, for some reason acetone, gasoline or other substance has been used;
• scotch tape se napryazva on parquet with the desired size in accordance with the format and design on the headlight;
• rumple the fragments of sa-lazement of the reflector, prepared for the meat;
• protective glass of the assembly with the help of the seal;
• fart e montiran is a venerable remedy for an ordinary place.

Important! Once you put a metalized molding tape on the top of the reflector on the top of the surface on the last, without shaking the name of unevenness or place, sometimes the surface is not covered.

Folio

Once you use the folio, the work is all out of the wrong way to start, somehow when you use a self-sealing tape on a metallizirana, from the only difference that the folio is shattered and there is a surface molded on the reflector, that kato nyama is sculpted layer in design si.

Use on the folio e one from start for barzo install on the reflector on the headlight

Epoxy resin or other molding can be molded from the bottom of the mold, corresponding to the temperature conditions for working on this medium.

boyadiswana

Updated on the surface of the reflector from the chromiran of the battle, it’s easy enough, for the comrade tryabva and follow the steps:

• cry out the headlight and the trail, degreasing the surface on the reflector;
• after that, apply a layer of battle on the top of the reflector and leave it to dry;
• repair headlights and install it on the car.

For help! For yes, you can colorize and lie evenly on top of the treated surface, better, yes, use the fight, containing chrome, and yes, selling it in a spray. Ako cupuwate the battle in an ordinary container, tryabva and I will apply with a pistol for a quick scan.

Used for a special fight, containing chrome, allowing you to breeze and effectively install the reflector on the car headlights

Ogledalen film

Ogledalniyat film is a building material, some of which are presented for a fee from polymeric materials with metallized coating.

In the industry, modifications to the glass film are produced with and without a stucco layer.

Nai-popular in tazi stock category sa follow the models of watching movies, produced by local and foreign production companies:

• Oracal - Oracal Trading Company (Russia);
• Silver - Scorpio Premium (Taiwan);
• USB stands for Ultra Solar Blok (South Korea).

Ogledalniyat film e lesen for the use of material, some may be used for the repair of the optics on the car

Can you correct the reflector on the headlight with the help of an inspected film, somehow as follows:

1. Correct this design, for some reason the construction tape was used, the surface was stuck on the reflector, it was repaired, or the charter was pressed, the surface was pressed onto the object being repaired.
2. The next model is all away from the headlight and all the way to the top of the film, the details are all scratched along the contour.
3. The surface on the reflector is not oiled, as in the previous version.
4. Izryazaniyat film (blank) ce by placing the product at the top of the repair, that ce fixer on the ground on the place, dokato ogledalniyat layer trebva even e obrnat navn.
5. In the case of using a film with a stucco base, fixing all of it with the help of a fenced sechoar, through some film it is dirty and becoming more elastic. Sometimes use a film without an adhesive layer, which is fixed with the help of some kind of sculpting, as in the case of using it on a folio.
6. When relying on the film, it is necessary to breathe in the mehurcheta, forming under the surface, and for the sake of osiguri uniformity on the light sweat, ejection from the headlight, somehow and the health on the film is fixed on the film surface on the reflector.
7. If you work on the reflector, you can form excessive folate elements (blanks), so try and cut it off with a knife.
8. In places, sometimes it’s not possible, and here and there, close up the film (corrugated parts on the reflector on the farovet, like ima taqv), those tryabva and bdat processing from the chromiran of the battle, as discussed in the predishnat version.
9. The trace is installed on the reflector, the fart is sglobyava and mounted on the car.

The headlight itself, equipped with a reflector with a clear surface, and in the state and osiguri high-quality clarification in time for work on a motor vehicle

Somehow, you can see from the above, repairing a reflector on a headlight on a car can be perverted from any owner of a motor vehicle with a minimum of financial dispersal and in a short time. Base the conditions for success on the theses of work and bring it on the road to the car in good condition with the desire to send it yourself and the availability of it at your free time for the commodity.

back kjm sdzharzhanieto ↑

Video

PreviousDecorative lighting and customization How to install Angel Eyes on PriorNextDecorative lighting and customization How to install angelic eyes on the VAZ 2110