How to install DRL on a VAZ 2110 and how to get rid of the cable
Days of light (DRL) is a lighting device that is used to adjust the visibility of the vehicle in time for the duration of the day.
Depending on the configuration on the car, DRL can be pre-installed in the standard optics on the car or mounted additionally. Kato DRL, do-it-yourself installation, all use light sources from factory production or manual work.
The standard configuration of the DRL on the VAZ-2110 is not foreseen, so it is difficult to install it from the value for many owner of the Toyota car model.
containment: 1. How can you direct yourself 2. How can you intend on the market? 3. Connected to DRL 4. zakonovo iziskvane
How can you direct yourself
The option for self-production on DRL and allowing you to customize your car at low finances and disperse, and the main guarantee for success in this case is also the ability to work with a manual tool, the availability of it in your free time and the desire to send it to work with your own system ryce.
Such a light source can be used for independent production at DRL: LED strips, separate LEDs and aluminum profiles.
Possibility for supplying daylight hours on VAZ-2110
Production on DRL with LED strip
LED tape is a factory-produced lighting product, which is an aluminum base, sometimes placed on top of the LED.
Manufacturers of LED products produce LED strips designed for different operating voltages. Therefore, in the production of DRL, the operation and use of models operating at a voltage of 12 volts DC, corresponds to the voltage on the burgundy of the vehicle.
For the production of more you shake LED strips with a length of 150-200 mm and Farove for fog (PTF) and you can use it all the time. You need to use the lines and the width of the PTF, but they throw on the line kit, which they can put in a single housing on the headlight, depending on the thinness of the height.
LED ribbons, which can and can be used when you are forced to work
Work on production on DRL with the help of PTF and LED tape is a perversion, somehow following:
- if you use a lot of LED strips, they will try to put a solid foundation on top, for yes you can use a lot of LED strips and fix them in one and eating a plain. For goods, you can use transparent plastic and a molded seal;
- conduct from the LED strip sa connection is firmly united with each other and sa soldering, and the outgoing conductor is not soldered to the common edge;
- parse PTF. For yes, send the comrade, with the help of the building sechoar, interface between the protective glass and the body on the headlight of the heat, after some removal of the sealant, with the help of the connection;
- removing the standard cartridge from the headlight, it is designed for installation on the source on the light line, and in the outer space, the base is mounted with the LED strip placed on top of it;
- Conduct from the lentite all the veins of the country to the housings on the PTF, and the diffuser (protective glass) is stuck from the intended country.
Important! In a similar way, you can direct the DRL with the help of the LED strip, but in this case, try again and consider for the question for osigurevane on cooling on the LED.
Opportunity for processing on DRL from LED strip
As soon as the product is produced, reverse engineer the PTF and mount it in its proper place.
Production on DRL with aluminum profiles and separate LEDs
The same option for the production is not suitable for the creativity of the choir, but in this case it is possible that they will send the DRL to the original form. kasno.
Such a thing, for the production on DRL from tosi type, sche vie tryabva:
- LEDs - from 5 to 7 lights per single DRL block, with power up to 3.0 W;
- Bream for LEDs;
- aluminum profile;
- connect conductors from PV, PuGV, PVS or analosi brands.
DRL from aluminum profile and LED
The base is made from aluminum profiles, at the top of which you put LEDs with the help of a heat-conducting mold. Varhu tyah samomontiran bream, koito osiguryavat the need for ygl on lighting on the source on the light.
Important! Once you connect the LEDs one to another through the connection of the conductors, it is necessary and do not reverse the polarity on the source to the light.
Such a direct DRL can be used to put the armor on the top of the car, which first open the debris in it, corresponding to the size of the product, or in the PTF, such as in an unfortunate case.
How can you intend on the market?
For the sake of the fact that, in accordance with the Rulebook for the movement of food (SDA), it is used for daytime light lines due to the category of exalted funds in time on the shofiran, the product is determined by starting to reflect on the stomach on the light source, installed in standard optics on the product equipment. This state of affairs is due to the fact that with a lip on the DRL, the water will turn on and turn on the lights or PTF, which may cause damage to the lamp, the location of the lighting device in the data sheet.
Manufacturers in the lighting equipment for cars did not sabotage these problems and on the market for car spare parts and they got a rich selection from the factory-produced DRL model.
When purchasing for such a product, the owner of the car has to try and install the purchased device itself, which you can send to the service or on your own.
Factory made right-hand day light line back kjm sdzharzhanieto ↑
Connected to DRL
Once the DRL has been installed in a specialized service, the owner of the car, please ask, these are the details of the operation, all of which are regulated by the regulatory authorities and the rules.
In the case of independent operation, there may be some options for connecting to the DRL of the electric chain on the car:
- With the help of an additional bud, montirane in the compartment.
- With the help of a 5-pin relay, it is usually located on the carrier, and a stabilizer.
zakonovo iziskvane
Supplied to the DRL at the top of the car, it was regulated from the GOST test and determined somehow the location on the headlight directly for a fee and the car series on the car, and parameterize for the best light in time for use.
Research for DRL sa indications in the following table:
№
p.p.
Index
Merna unit
measurements
Quantityto
1
Farove distance
mm
not a little from 600
2
Distance from riba per tyaloto to DRL
mm
more than 400
3
Distance to the spot for a fee
mm
not a little from 2504bjl per beam vertically 255bgl per beam vertically 556Minimum surface area for all DRLcm2not a little from 407Light streamLight400–800
Schematically presented for the GOST examination for putting on the DRL top of the car
Day light line or such name DRL light line sa popular media own home cars, it will help you to paint on goods on a burgundy background on a car and increase on the stomach on standard optics. Request for installation on additional DRL e from the value of old models of VAZ cars, including the owner of the VAZ-2110.
PredishnaDaylights How to make daylights on VAZ 2114NextDays of Light How to install DRL on a Ford Focus 3