How do you choose the tops of the ima in the farovete on the VAZ 2110 and which ones you choose

Mladite momcheta nai-chesto elect parvata kola from the local brand. But honestly, it’s a tax and it’s repaired, and it’s crushed on the crusher from the foreshadowing, we’ll fix it with something else. In the pelvis, the article is very similar, like a lampi ima in the farovet VAZ 2110.

containment: 1. How to install the headlights on the VAZ 2110 2. Which one should you put in better: halogen, LED or xenon? 3. Election on a good-natured lamp

How to install the headlights on the VAZ 2110

The Desetoto family on the “Lada” or, somehow, the name is also “LADA 110”, all consist of 4 models:

2110 - sedan;
2111 - combi;
2112 - hatchback with pet vrati;
21123 is a three-door hatchback or, as they say, a coupe.

Vidové Lada 110

They will produce it in AvtoVAZ from 1995 to 2009, but in the plant in Cherkassy they will continue to produce it under the Bogdan brand until 2014. Farovete top tyah byaha, so it’s like “deset” or “VAZ 2110” in the statute, but the information is It is applicable for everyone from generations.

There are two types of farove on the “desetkit”:

Bosch;
Kirzhach.

And two options for thinning it out in this way, why separate the lamp and sa dissuade for kasite and keep the light line, but we are talking for tov in the valley. What is the difference between Bosch and Kirzhach?

Farovete Bosch for the VAZ 2110 will be produced in Ryazan, at the moment of the tasi, the company of the sec- tor is AL-Automotive Lighting. Catalog number - 2110-3711011 (high), 2110-3711010 (high). Tova sa standard farove, imat two reflectors - responsibly for long and kasi light lines. Those sa are combined into a single block with glass covered.Cut through not a little more from the bream on the Fresnel, such glasses are called even velpape. It is necessary for this, for the formation of the correct light and the line on the prekvane according to the beginning, so that you don’t blind the water on approaching and out of the car.

Farove on Bosch

You can look at the original headlight on Bosch for the “desetkat” in this video:

Vtoriyat type farove se proizveda in ZAD "Zavod Avtosvet" in the city of Kirzhach in the Vladimir region, otkdeto idva and had them. With the farovet of Kirzhach, the optics for the light line of the bream, the glassy cut of the bream is not corrugated, but smooth. The lamp for a long time is usually a reflector, but there are slits on the glass in front of it. The lens for the long light line is shown to the left of the picture along the bottom.

Svetlini Kirzhach

The glass is attached to the housing on the Bosch 2110 headlight with brackets, and on the Kirzhachi it is on the top of the seal, which makes it much more difficult to open it up, in time for some you can completely and damage the product. Can you compare the designs and how they shine, distinguish between the headlights for the “desetkat”, see the video below:

Kakvi sa crush

And for a long time, and for a long time, and for a light line, mount the factory-made H1 halogen lamps, AKG 12-55-2 mark. They look like this:

Lamp H1 for VAZ 2110

You can also find out more usefully from the table for labeling lamps, which are like in the VAZ 2110.

Table on the video display of the lamp, installed on the VAZ 2110 back kjm sdzharzhanieto ↑

Which one is better and put it together: halogen, LED or xenon?

Somehow veche spomenachme, farovete for the VAZ 2110 sa destination for halogen lamps. Tova means that, according to the law, they cannot install LED lamps or xenon. According to part 3 per part.12.5 from the Administrative Code of the Ruskata Federation, you may be deprived of the right to sit for up to one year.

Wrinkled up, che xenon can be legally installed in Kirzhach due to the different design and availability of bream. Vsshchnost tova not e varno. For legality on the installation of xenon on a car, please follow the requirements for the Decree on the Government of Ruskata Federation of 09.10.2009 N 720 (as amended on 15.07.2013, as amended on 04.08./2014) Regulations for the safety of the chariot transport means":

That is, you need from the proofreader for the head for automatically bowing and the puck, somehow from the transparent glass of the front of the lens. But tova is not everything. Tryabva yes candidacy for CAT for a change in design, it is based on that, if your promyana was approved, then you should have given an opinion. perverted to a certified service. Forgive me, it's legal to install xenon, but it's not hard enough.

"Deset" with xenon

With LED lamps, the situation is twofold: from one country, farovet is intended for halogen lamps, and from another, LED lamps are labeled H1, which indirectly shows compliance with halogen.

back kjm sdzharzhanieto ↑

Election on a good-natured lamp

Choose good krushki for kasi light lines are not forest, for some reason they either don’t shine, or they burn out. Directly, the assessment is low on the best offer for the price of the entry price, the base is set on the basis of the tarseneto and the return line (price for the set from 2 lamps to March 2019):

Lighthouse H1 12V 55W Super Light + 50% off ULTRA series - 3 dollars or 240 rubles.Folk lamps from the temple of brightness from local producers.
OSRAM ULTRA LIFE 12V 55W H1 - a jet about $ 7 or 500 rubles. Tova sa Evtini, but good lampi. The manufacturer promised that even more they will spend 4 five times longer than the standard one, look at the motorist for information.
Philips Vision plus + 60% 12V 55W - $ 10 or 680 rubles. German lampi with 60% increased brightness.
Philips X-treme Vision + 130% H1 12V 55W - about $ 13 or 800 rubles. The special feature is 130% higher brightness than standard. In X-Treme vision, there are many more xenon naming effects.
OSRAM Nightbreaker UNLIMITED + 110% 12V 55W — $15 or 1000 rubles. Somehow there is a hint, the manufacturers are firm, so those are 110% brighter from the standard.

Furnace krushki

The process of changing to lampata

And finally, let’s talk for a while for a lampat in a headlight on a VAZ 2110. You don’t need to go to the service, change it for yes. Tova stava in 5 minutes. Open the hood and look at the headlight. There are two hatches on the head of the mu ima, cover with a shoe or a plastic cap from the gumen. Close to kryloto and flasher (without meaning from which country) eject the light line, and close to the radiator e far.

The capacitance on the sunroof on the lamp can be different depending on the model on the headlight and the year of production on your VAZ 2110, but the principle is not to change to the lamp. As an example, it is shown in the picture, in the case of a key, which you can squeeze and squeeze. In the case of botushi on the Humen, they will simply dump it, ima and kapachki, which will turn it back into a clock hand.

From the engine compartment

You can trace the cato in the capak, you see the block block, just tryabva and get rid of the foundation. But don't screw up the conductors, grab a sensibly plastic one often. Between the other, in the hatch on the hutch, there is a light line and a lamp behind the parkiran (see the picture below). For yes, open the krushkat, shake it up and move the jarzhach to the spring (bracket). The format and fixed on the pelvis can be different from model to model and year of production, but not much has been heated, so proceed according to the appropriate start.

Spring retainerCan you get rid of the lampat

Please, pay attention that the lampata cannot be placed incorrectly for the sake of format on the floor near the foundation. You can see the process on the pre-installation down the drain. For a shift in the long light line, eat it up.

Preinstalled process

Somehow it turned out, crumpled on the kasita and long light lines on the farovet VAZ 2110 e barza, dory don’t need a key or other tools. Basically, what we can and we will send you free of charge with your own si rytse. Thanks for your attention.

Predishna Changed to an automatic lamp Next Change to an automatic lamp