How to lamp for kasi svetlina sa necessary for ford focus 2 and how yes gi change
Any kashka is out of the fire sooner or later, but lamp with a light line will burn out nay-chesto, t y kato cheso will use the kato DRL and exhaust the resource of si dori prez day. Dnes nyama yes let's go to the service, but let's send the change crumbs with kasi svetlini for Ford Focus 2 to yourself si.
Containment: 1. Kakvo sa 2. Change process 3. Typical malfunctions - where are the suggestions
Kakvo sa
Started for the second generation Ford Focus after 2004 and will last until 2011, and the 2008 prez was further perverted for a long restyling.
Ford Focus 2
Differences between farovete predi and trace restyling
Zadnata part of the headlight on the Ford Focus before (very) and next restyling (mahnat kapaka and prashnitite)
Somehow you can see from the gornat of the picture, exchange the zasegnaha and farovete for kolata - those half-breeds are different, in an aggressive form. But the reworking has additionally influenced the design on some of the most interesting ones on the fenerite. So, if you are ahead of restyling for a distant and close module, the capakt is more easily crossed, then the next module is a separate hatch, all with your own trunk.
In spite of Comrade, change from the general not all reflections to the source for light. And in two cases, light H1 and H7, all of which are used in response to far and near. And dvata sa halogenni and imat power from 55 watts.
Long svetlini (loudly) and kasi svetlini Ford Focus 2
Rating on good luck models
It’s difficult to get it and send an assessment to find a good lamp for a good light line for a Ford Focus 2, some of them work for a long time, others shine for a long time, and a third have a good price / efficiency ratio. At the end of the day, decide on the right to toilets, light up the light lines by determining the criteria and barely trace the assessment. Another toilet is like this:
- standard halogen.
- Long exploitation belly.
- The stream of light rises.
- With xenon effect.
Now let's break down the device according to estimates.
standard halogen
snapshotUredApproximate price, rub. Features 
Philips Vision H7360good value for money
MTF Light H7 Standard350 
Osram Original Line H7270exploitation belly for about a year, price available
Long exploitation belly
snapshotUredForecast price, rub. Features 
Philips LongLife EcoVision H7640declared operational life - up to 100,000 km mileage vv included state 
Osram Ultra Life H7750declared operational belly - up to 4 years
The flow of light has risen
snapshotUredForecast price, rub. Features 
Philips H7 RacingVision + 150%1320brightness one and half five times the brightness of a standard lamp 
MTF Light H7 Argentum + 80%1100good quality / price ratio 
Osram Night Breaker Laser H7
xenon effect
snapshotUredApproximate price, rub. Features 
philips whitevision 
Osram Cool Blue Intense720 light-colored, possibly close to daylight in the early morning track, good value for money 
IPF xenon byal H7 + 100% 2200 increased light power back kjm sdzharzhanieto ↑
Change process
Follow the cato lamp and lighten the light, and decide how and how to change the “close” Ford lamps. For yes, send tov, with any modifications to the Ford Focus 2, try and turn off the headlight. From tools and accessories we need from:
- long flat screwdriver;
- Key Torx 30 (optional);
- clean the shells;
- back up the lamps for lighting.
The development of the fixing screw is the only one. The head on the screw and the slot is combined, so you can use a wrench or a screwdriver, for which you will miss.
Removing the fixing screw with a screwdriver (left) and a Torx wrench
The fener is attached at a distance from the key, which can and can be used with a screw-driver. For a golyama, the clarity of the shchegi will show at the assembly of the headlights.
Dolni fixators-keys on lampata Ford Focus 2
Swing the headlight and go buttame forward along the sill to the colata, we don’t take it away, why the fener still hang on the conductor.
Fellows on the farov Ford Focus 2 
Decoupler
Extend the headlight, until it allows you to conduct, incline, encroach on the block and through the onslaught on the key, get out of contact. Now fenerat can be put on a worker’s masa - it’s a lot more convenient and work on tosi beginnings.
On the white. When changing the modification on the Ford Focus 2, it is enough for the conductor to be enough for changing the wheel for the light line directly above the car. Therefore, blocking cannot be done. Not much convenient, but very real.
On the headlight on the headlight, I see the heads of plastics capak, which is smoky from four keys. For the clearness of the shchegi, showing on the headlight with a veche, a kapak has been dumped (during installation, they do not see everything from a single gl).
Fixing the brackets for the hood on the rear lamp of the Ford Focus 2
Izstiskvame gi and mahame kapaka. In front of us are two krushki - long and kasi svetlini - from the substrate behind the safe varhu tyah. In the picture, there is a clear device for dissuade for being close, the marks of the shooter.
Cover for kasi svetlini (gum headlights Ford Focus 2)
Izvrshihme vsichki tezi operation with pre-styling headlights. Now let's skip restyling. Premahva behold the beginning, but instead of a single common hatch, like a Kazakh in the mountain, that ima is two from tyah. Tozi, who is close to the center of the kolata, is dissuaded for sitting (strange). Get rid of the human shoes from the hatch.
Felted on the trunk from the desnia headlights Ford Focus 2
Before us is an approximate picture - a lamp is “close” with a guard on top of it. The block is removed through a simple izdarpvane (with dorestyling it is similar).
Premahvane on the substrate
Under the block, the cover is behind the light line, squeezed with spring clips. Squeezing the shackle, I’m going back and I’ll beat the wreck.
Dismantling on the cover for the case of light lines on the Ford Focus 2
Time and put down your arms, you can’t, but you can’t finish the glassy top on the halogen device with a golier.
Important! Ako will finish the glass on the krushkat with the goli ryce, do not take it away from the clean carp, drunk with alcohol.
Slagame go, take a new krushka for the light line and I will put it on the fire on the burner. Capturing the spring clip and placing the retaining block at the top, contact on the base. Zakopchavame protective kapak (slug on the trunk) and montirame lampata vvv Ford. For yes, send the comrade, the first onslaught, dokato se will use the key switch, the follow-up screw is fixed from the top.
Zabravihte and turn on the protection connector on the fenerceto? This is the case. The development of the screw, the onslaught of the key, the headlight, the carve of the block in the nest on the fener. Mount the plywood again on the ground.Tova e vsichko, nothing is difficult.
Typical malfunctions - where are the suggestions
Change the lamp, but don't work close to your Ford pack? Most of all, this is the case for the sake of damage to the preservation of the prepasitel for the case of the light line (at the moment on the halogen, there is often a current appearing on the halogen). Introductory mounted block name prepasitel. The device itself can be designed for a frog. Forever, behold, fix the screw (marking the arrow on the snapshot along the bottom) and sam the block of the pad in the streamer.
Location on Kutiyata with prepositions on Ford
Throw down the protective hood. Ako colata e is pre-stylized (look uphill), togawa montage block is as follows:
Mounted block Ford Focus 2 dorestyling
Tuk predpazitelat No. 48 with a nominal value of 20 A dissuade for a farovete for loved ones.
Ako imame Ford Focus 2 trace restyling, togawa montage block more so:
Mounted block in post-style Ford Focus 2
Tuk veche ima 2 are “close” to the predpasite - separate for the left and right side of the headlights. For lyavat e was dissuaded for vmkvane # 143, for dyasnat - # 142.
Tova e vsichko was crushed on the lamp for a light line with the Ford Focus 2. If you read the article carefully and to the end, then you can do it with the rubbish rubbish yourself and without any confusion to the specialists from the service.
PredishnaHow to change the headlight on the headlight on the Ford Focus 3NextChanged to an automatic lamp