How to lampi ima in the farovet for the fog ford focus 3 and how to change it
When the time is too long, the light will be the main source of light for darkness, some may and osiguri comfort and safety for a drink. This is to protect the correctness of the lighting device on these devices, and watch it especially carefully. From the tazi article, we’ll analyze which lamps can and can be installed in the headlight for the fog of the Ford Focus 3 and we’ll also teach you how to change them yourself.
Containment: 1. What kind of lamp is needed 2. Change instructions 3. Other possible causes for malfunction
What kind of lamp is needed
As a rule, the manufacturer installs an Osram lamp in the headlight for a foggy Ford Focus 3. The price for the original H11 12v / 55 Osram lamp is about 500 rubles. This device is supposed to be operational and cost about two to three years.
Standard headlight for fog for lek car Ford Focus 3
But, let’s face it, it’s not the only possible option - you can install lamps from any other manufacturer. The device is a tripod and ima base H11, power 55 W and a color temperature of about 3000 K. Lampite from the bottom of the color temperature illuminates five times at a clear time, and from the top, they are practically useless when it is foggy or rainy. Finally, we have observed a tendency to replace xenon lamps and lamps with an effect in the farovet for fog. A color temperature of 5000 K is good, but a color temperature of 5000 K is obviously not effective in the long run.
Here is an example of a more quoted lamp from various models and manufacturers, which is wonderful for headlights in the dark.
Mugs ss standard characteristics
ManufacturerModelPower, W PriceKOITOH11-12-55 0110K55from 450 rubles GEH11-12-55 53110from 490 rubles. 2-55 + 30% Vision 12362PRC1off 450 rublesVALEOH11-12-55 Standard 032525from 450 rubles
Devices with increased light power
ManufacturerModelPower, W PriceDiaLuchH11-12-55 + 90% PGJ19-2 Megalight Ultra PR55 from 850 rubles. KOITOH11-12-55W (100W) Other brand from 2000 rubles. per setOSRAMH11-12-55 + 110% NIGHT BREAKER UNLIMITEDfrom 1700 rub. per set
Lumpy with tummy tuck
ManufacturerModelPower, W PriceNARVAH11-12-55 LONG STOMACH 48078LL55 from 490 rubles. PHILIPSH11-12-55 LLECO VISION 12362LLECOC1 from 550 rubles. OSRAMH11-12-55 + 60% SILVERSTAR 2.0 from 1300 rubles.
Hello! If you are interested in seeing the list on the lamp, using the Ford Focus 3, then you can and will find the necessary information knock.
Rating on models and manufacturers on car lamps
Dnes, somehow razbrahme, ima many varieties of lamps with the basis of H11, which are produced from the golyam broy company. Which manufacturer will you choose? Understanding this, there is no categorical answer to Tozi question - it depends on the budget and personal preferences. And a list with the manufacturers down the line, based solely on the feedback on the owner of the cars, we will not help but make a good choice.
The Philips company is not a leader, it is the only manufacturer of automotive lamps from the watershield. About one third of the cars in the light are equipped with technical products and goods to say the least. Crush from the tazi brand sa izdzhlivi and technically the real characteristics of almost wines will correspond to the shortest. Maybe the only minus for the markat is the high price.
The German company Osram is a bi-seriously competitive competitor at Philips today. Krushkite on the tazi company has excellent characteristics and is relatively moderate in time price. This is why many owners of cars around the world install lamps from the Tazi company in their cars.
Tazi German company climbed into Russian Pazar relatively quickly - prez 2013, but almost immediately gained popularity for the sake of good, bright characteristics on the product and an acceptable price. What is the lack of it: lamp from the Tazi mark will not plant good Russian birds and will not spend a long time on our hollows.
Ruskata company DLED has appeared at the fair in 2008 and is a reliable manufacturer of various LED equipment. The product is distinguished by its low price and good performance properties. Based on the trust of the client and the presence of its own department for testing new high-tech developments.
KOITO is a division of the Japanese corporation TOYOTA GROUP and is one of the leading manufacturers of automotive lamps and optics. In the range of mu and ima, not the most standard lamps, but also a special series, some high-temperature models differ in double brightness with normal power indicators.
Change instructions
Crumpled in the farovet for the darkness Ford Focus 3 can be perverted in three ways:
- Remove it to the bottom.
- Prez engine department.
- With a preliminary dismantling on the headlight for the fog.
Prviyat option e is convenient, like an imam at the location of an observation hole or a hole. The second is labor-intensive and includes premahvane on the headlight. Auschwitz's method is not very convenient, but it's more complicated: in this case, it's even more problematic to get to the PTF rule.But from a friend, the country is nay-convenient and nay-safe for five.
Nyama yes razglyame the third method, ty kato toy justifies the very same thing as necessary for cleaning and supporting the samiyat headlights. Contrary to this, in some service centers, lamps in the PTF Ford Focus 3 will change the method according to Tosi. Maybe for the sake of fact, che tazi is an option for e-scapa.
Smena on krug for mist through premahvane on PTF on Ford Focus 3
From dnoto
We’ll exchange it and dvete, for some reason, it’s burnt out, the second one won’t be alive for a long time, the light of the stream will shine on the starata, the lamp will be further down from the tozi on the new one. For work, no trouble:
- Torx T-30;
- revision pit / climb / scream;
- backup lamp H11.
Gledame under the armor, remove the screws for fixing the kalnik to the wishes of the headlights. Izklyuchvame go with the key T-30, ogvame fish for kalnik.
Partial dismantling on kalnik for Ford Focus 3
Look at the formation of a feast and see it often behind the headlight for darkness. Based on a lampata with a montirano on top of it, protect the starch from the edge of it.
Zadnata often on the headlight for the mist: lampata ss zahranvane varhu neya se vida perfect
Khwashame lampata for the foundation and I will return to the watch hand. Now the device can be knocked down from the headlight.
Dumped on the lamp from the headlight for the mist Ford Focus 3
Click on the top of the key and get rid of the lampat.
The spreader is fixed to the lampata with the help of the closing mechanism
We take a new lamp, put a block on top of it, for sure, we assure you that it’s safer in the locality. Install the krushkata vjv headlight, fix the frame I, kato I turn on the sap on the clock hand. Put the kalnik on the meat, fix it with a screw.
From the engine compartment
For yes, you will reach the headlight for the mist before separating to the engine, shaking and dismantling the headlight. Use a T-30 Torx wrench or flathead screwdriver and develop two screws with a universal slot.
Fart on Ford Focus 3e secured with two screws with universal slot
Zamahvame fara and go durpame forward along the sap to kolata.
Felted on headlight Ford Focus 3
Switch off the block, leave the headlight on the country. Looking at the engine compartment and on the headlight on the farovet, for a foggy vision, it is based on a kruskat from putting a block on it.
Khvaschame of the block, the onslaught of the klyuchalkat, and I am worn out from the lampat, which I am tired of. Zavartam lampata back to the clock arrow, I remove the glans on the base and I will wear out the headlight.
Dumped on the headlight for the darkness of the Ford Focus 3
I take a new lamp, I put it on the spot on the burner, I fix it, then I turn it on the hour hand. Block storage slug. Montirame headlight, we won’t take it away and turn it on to store it.
Other possible causes for malfunction
Fault on the crash site is nay-chesta, but sigurnost is not the only fault on the farovet for darkness. Ako the trail is crumpled on the lampata fart is not lighter, togava go ahead and go to the car service, try and experience it yourself and solve the problem.
First of all, when the halogen lamps burn out, for the sake of current starts, the preposition is located in the mounting block, out of the fire. The device itself can be put in the cabana ass of a frog, right from the water, in a crack at a pytnik. Remove the decorative capak, then close the keys and check the correctness for the preposition 75 (numbering and location on the prepositional site for the order from the foreign country to the capak).If not, replace it with a properly rated value from 15 A.
Location and scheme for kutiyata with prepositions
So let's learn how to change the lamp in the farovet for the mist of the Ford Focus 3. Now, choose a suitable cap and install it yourself on a soft spot to burn out a lot of problems.
PredishnaFarove for darkness How can we change the headlight for darkness Chevrolet CruzeNextFarove for the fog