How to install the headlights for the darkness on the VAZ 2107
Everyone who owns a VAZ car is well aware that it is difficult to name goodness on a tazikola. Tova e is especially safe when the shofiran is in the fog, removed or jdzhd. In today's article, let's stop these problems, which equip the VAZ 2107 with headlights for darkness.
Containment: 1. Research on regulatory documents and legislation 2. Kakvi lampi, yes, you will choose at the headlight for the mist 3. Location and installation on the fog 4. Scheme on the wire
Research on regulatory documents and legislation
Ty kato on the VAZ 2107 nyama redovni places for installed on the headlights for fog, tryabva yes gi choose (places). For yes, there are no problems with the servants at the CAT in the future, and yes, let us technically pregled, when choosing a sulfur, we lead from GOST R41.48-2004, paragraph 6.3. Nyama took this quotation literally, but the following is common:
- The distance from the country to the colata to the fish on the headlight for darkness is not more than 400 mm.
- The distance between the farovete from the mouth is 600 mm. Maybe up to 400 mm for a total width of a car under 1300 mm.
- High above the surface on the ground - not a little from 250 mm and not more than 1500 mm.
- PTF is not a breeze and this is the world over the farovete.
General requirements for installation on PTF according to GOST R41.48-2004 back kjm sdzharzhanieto ↑
Kakvi lampi, yes, you will choose at the headlight for the mist
Dnes imam three possibilities:
- Halogen.
- LED.
- xenon.
But beforehand, let's direct the election, we'll talk for a while about the color temperature. Kolkoto in a high way (within reasonable limits), sensible in a good way, brightening and a little scream on the eye.But light with a temperature of 4000-6000 K e is good at a clear time. Comrade would be a wonderful addition to kam farove vie. But sometimes the time is bad, the situation is rather dramatic for me.
Byalata Svetlina is strongly painted in water particles, and she is drastically painted on lightness. Svetlinata from the bottom, the color temperature penetrated in a good way prez the darkness and rain, but illuminating the pitya in a clear time.
According to Tozi, start knocking and choose the optimal color temperature especially for your "habitat". Ako in our area is extremely dry and clear time, togawa ima sense yes, they will put on a jelly lamp - 3,500-4,300 K. Aco, it’s worth it to put it in rain or fog, togawa the optimal color temperature for the PTF lamp is still in in the range from 2500-3000 K. Svetlinata with a tazy, the temperature is very yellowish in shade, but still penetrating perfectly into the fog and rain, osiguryavayki is possible to have visibility with a minimum of glare.
Important! A lamp with a color temperature of over 6000 K is used for crawling through the whole world, not in the fog itself, but also in the far. As a rule, those se montirat on the show cars, for yes szdadat on-representative view.
Now let's talk about seeing lamps and technical characteristics.
xenon
Theses from the light source offer a color temperature from 3000 K and up to the temple, but most often cross ca 4300 K. According to the principle of xenon, you can put it in PTF, but it’s not difficult enough to set a lamp with a temperature of 3000 K, and stop not sa suitable for the shofiran at a bad time.
In addition, often from PTF for VAZ, they are designed to work with lamps with a hot gas and halogen, and in no way are they suitable for working with xenon.Installed on a xenon source for light instead of a halogen source for light, first, with a problem with CAT (deprive from the right and control of the excellent tool until one day), and secondly, such a headlight will still blind the upcoming chauffeurs, no matter how you regulate the gi. And we will decide and install xenon, then we’ll take a trip and pick up the lamps, the destination for the xenon lamps.
Xenon lamp for cola with igniter unit
halogenni
Crush from tosi type imate color temperature 2,800-3,500 K, which means that it is different for use in the fog. Another predimstvo before xenon e tsenat. The xenon lamp is a little more than a halogen lamp, and the xenon source is installed on the light fixture and installed on the driver for high voltage - this is the name of the ignition unit. The halogen cover can be tied directly to the burgundy lining on the car. Osventova is the name of the halogen flask, which is specially designed and made to look like a fog.
Halogen cup for cola with yellow cup
LED
The color temperature on the LED cover can be almost any, so choose a suitable cover for the headlight for the darkness of the forest. The only thing is that the LED bulbs still work correctly in a halogen headlight, but in spite of this, they produce a bright light, similar to a halogen lamp. Maybe the only drawback is the LED source for the light and the high price.
LED lamp per stake back kjm sdzharzhanieto ↑
Location and installation on the fog
Razbrahme crash, now tryabva yes we will decide where and install the farovete for the darkness. Tuk Imam has two possibilities:
- Mount under armor.
- Hit her in the armor.
Prviyat option e is quite simple and yama and takes a lot of time, but, you see, do not shine with aesthetics. In addition, takiva farove for darkness got a lot of damage for destroying, for example, in the case of an unsuccessful parker. And GOST (see the section “Regulatory Documents and Legislation Research”) for a fee, it can’t be supported.
Mounting on the headlight for fog on VAZ 2107 under armor
Grazhdaneto on the headlight for the darkness in the armor, disassemble it, it is difficult, but still look a lot more aesthetically and safely behind the headlight itself. This is more protective of everything from the insert, especially the trace of the cato middle part of the armor on the VAZ 2107 is plastic.
Farove for the darkness, armored on the VAZ 2107
Let's choose a beginning and buy a farove for a mist. In the sale, you can, yes, you can choose Feneri with different shapes and sizes, but for yes, they will enter, somehow, this case, into the whole design on the VAZ 2107, we will choose the right ones. For example farove for fog, produce in Poland. A special charm on the Tozi model is a convenient mounting bracket, which somehow allows, Makar and small borders, and adjusts the tilt angle on the fenerite.
Rinse PTF for more information on design, fasteners and price
Hello! According to the principle of selection on the headlights, it is a purely individual question. If you wish, you can use the gornat technique, you can cut everything into armor on the VAZ 2107.
Dump the armor, put the farovet on the front, look out for these places, and mark the mark. Technician size in the ideal case, there is a problem with the size on the PTF, but let's leave a small field: we'll direct the other one a little, then we'll finish the file with something.
Markirane on the aperture for the headlight for the mist on the armor of the VAZ 2107
Penetrate with a small diameter, open the aperture along the perimeter and gird the wound with the help of a perforated trion or an ordinary knife.
Razryazvane on the seer for the headlight for the mist
Nasochvame beauty with a saw, kato inexpressibly probvame headlight. You tryabva and vliza freely, but not tryabva and ima outside the feast, which will ruin the external view.
Completed the seer under the PTF file
Leave and fix the farovete for the darkness on the armor. Tova can become according to every beginning. The author of the picture is using a standard bracket, punching two openings behind a bolt hole. The difference between the bracket and the armor can be closed with the help of a spacer with a suitable size or a washer. Head on the chatter from the outside, cover the lining from the chrome-iran, so it looks like it’s not collapsed.
Scheme on the wire
Leave and svyrzhem sew the headlights for the fog from the burgundy mrezha on the car. In the VAZ 2107, send the goods to the forest and send it to the installation block and place it behind the installation on the predpazite and completely cabled from the cables to the substrate. But it’s okay, take it apart, buy some more tryabva. Osvent tova imam need from:
- Relay with block km.
- The switch on the farovet for fog with a block of stones.
- Women's knife block.
- Special automotive conductors (eg brand PGVA).
- Three prepositioners: one for 15 and two for 7.5 A.
- Two 55W H3 halogen mugs (not included with headlight).
Installation kit for connection on the headlight for fog VAZ 2107
Nyama yes, this is something to do with the electrical diagram. We just accept a certain thing, we don’t know how yes it’s a couple, and we restrict ourselves to a montage diagram.
Scheme on the link for the link on the headlight for the fog VAZ 2107
On the marking diagram, Ш4, Ш6, Ш7, Ш11, Ш9, it is shown to place it on the mounting block, under it it is clearly clear: switch on the page of the light line, headlight for the darkness (we mount it ourselves) and switch on the front light line.
On the first place, we’ll take the place for the installation on the relay for turning on the farovet for the fog. Author on the picture, decide yes, I installed the top kalnik on the engine compartment.
Installed the relay for the farove for the mist (loudly)
Now I’ve been cabled from the installation of the block to the farovete for the fog. Ty kato imame plastic armor, more from the grounding conductor, together with the protective conductor.
Electric sheaf for the headlight for the mist, compartment for the engine
Hello! If you wish, you can, yes, you can go to the farove, which is not in the engine department. For example, you can chat and chat for fastening on the farovet.
For hopefulness, conductors can and will be rezbovani in gofriran (heat-resistant in a good way). In the karvam, conduct in the opening in the prestilkata, the squeezing the edges on the conductor with the clamp from the “female” type - put the same gi at the top, contact on the lampite.
Protect the conductors for the farove for the mist, precarani prez prestilkata
Now decoction the mounting block (located in the compartment on the engine under the front glass of the cross-section of the nursery). In the picture, the length is indicated with the number 5.
Location on the mounting block in VAZ 2107 (position 5)
Dismantle the go, kato develop 2 nuts and stigame to support. Take the measurements with the necessary length, put the pressure on the knife upside down with pliers and the diagram, presented in the mountain. For yes, send the tov, turn off the substrate to your editorial office and put the contact on the knife in the necessary nests - those are shaking and slapping. Prolong the conductor from block Ш4 in the compartment to the area for installation on the key for darkness.We’ll put it up to the page of the light line and turn on the light line to the empty place, closed with chips.
Mounting on contacts on the tip in the substrate on the mounting block on the VAZ 2107
Is everything ready? Montiram mounting block on the meat. Now, let's pass on the preposition. I'm interested in this from the tezi, koito sa marking the arrows on the snapshot along the bottom. Zelenata arrow of the prepaid marker, total for two PTF. Toy e installed initially, ty kato zahranva other chains in the car. The nominal value of the resistance is 10 A, but I can also replace it with five tens of amperes, so when installed on the headlight, for a foggy nat, it is not possible to increase it. Red arrows show predpasitelite, dissuade for lyavat and dyasnat fara for darkness. Initially, maybe they don’t stand - on the kolata nyamasha farov. There is a montirame of prepositions with a nominal value of 7.5 A.
A block was mounted with a mount for the front panel behind the darkness
Leave yes installirate and svrzhet bud for control on the farovet for the fog. Premahvame is decoratively covered in a zadnata part on a consolata for a smoked one for a speedy kutia and an out of tlaskvame chipsel, a page lamp and a bud on a light-colored one on a glavata in the opening. Sglobyavame verigata, kato narazvame directly in the conductor, and away from the switch, connect it with the conductor, precluded from the mounting block, install the butonite, inclusive of new, on the ground.
Butont for control on the farovet for the darkness installed instead of a chip
When this work is done, it may be considered completed, including me, checking me. Yes, it’s a good time in equal time with armor and it’s cabled, but it’s a true and high-quality headlight for darkness, sometimes it doesn’t let you down and still send it safely at any time.
PreviousFarove for the darkness How can we change the mug for the darkness for Hyundai SolarisNextFarove for the darkness How can we change the headlight for the darkness on the Chevrolet Cruze