How do I change lampat in PTF for Renaul Duster
Title: Farove for the mist 
Correct the headlights for the darkness, osigurevat excellent visibility at a bad time, which in some way means safety. Dnes, with the tezi, some of the “relatives” of the PTF sasi enslaved or brightened them, leaving a lot to them if you wish, we’ll change the headlight for fog with the Renault Duster, and at some point we’ll teach you how to change the lampat into it.
containment: 1. Which mug yes buying 2. How can you exchange your own si 3. How do you direct it, if PTFs don’t work and lamp sa incompetent
Which mug yes buying
We’ll save some money on a crash in the farovet for a mist, so own cars from every brand and model, and the operation is redovno. Renov bowls with fasung H11 power 55 watts.

Headlight cap for mist Renault Duster
Thus, the headlights were used in the first generation of Renault itself until 2010. It’s easy to engineer for the concern to easily change the design on the headlight for darkness and backs and use the PSX24W crushers in the tyah, which imat is a little different installation.
Do you need to install LED lamps
Ima and LED are analogous to H11 lamps, but the manufacturers do not use them in standard headlights for fog, intended for working from the top with a pressurized plug, including halogen. Tova se should have a completely different light characteristics on the LED from the light, specially with a glare on the spread.

H11 LED Mug
The trace is crumpled on the conventional light lines with LED headlights behind the darkness, cross the waters in a blind way, illuminating the bird.It is difficult to eat and regulate the headlights for the fog with LED caps, as a show of practice. Osventova sjs LEDs in the conventional headlight for the darkness (and not itself) are still a problem with the technical problem and the patrol on the CAT. Osventova problemite sa sufficient seriousness: depriving them of the right and managing the most important means for six months or a year (part 3, member 12.5 of the Administrative Code of the Ruskata Federation).

LED headlight for fog and special system for focusing back kjm sdzharzhanieto ↑
How can you exchange your own si
Now, let's stop talking for a while, but change the muzzle in the headlights for fog to Duster. For yes, change the crusher in the farovet for the fog to the Duster, and save the following tools and accessories:
- Torx T key - 20;
- wrench for 17 (optional, but convenient);
- medium flat screwdriver;
- pamuchni rakavitsi;
- New mugs with base H11.
For yes, you will catch up to the farovete for the darkness, and tryabva, yes, you will move the lining on the arcade to the colelata. Tuk ima two options:
- Svalite prednoto pricked.
- Wrap the shuttlecock close behind the gums of the headlights and sharply behind the left.

Premahvane on the predpazitel from prsky
Prviyat option more sooner than the time, but more convenient for work. Now tryabva yes, skip the suggestion, I’ll cut off the cracks on the engine. For yes, direct the tov, take the butaloto from the flathead with a screwdriver and develop the krylat nut.
Predpazitelyat from prsky veche may be dumped.

Premahvane on the predpazhitel from prsky on the engine
Vorzhavame se from the T-20 key and curl the self-tapping screws for the lining on the kalnik, which marks the arrow. Bend back the lining on the kalnik and get access to the back part of the headlight for darkness.
Izklyuchvame to protect the block on the headlight for darkness, for some squeeze (do not push!) Rezeto and just get rid of the block itself. Stay and get rid of the krushkat. Khwaschame go for the base and go zavartame 45 degrees back to the clock hand. Now you can just get rid of the contact.

Izklyuchvane on zahranvaneto and premahvane on the headlight for fog
Clean the flames (halogen lamps can’t even take them off the head), wear out the new device from the kutiyat, change the burnt out and fix it, turn it 45 degrees down to the watch arrow.
If you accidentally grab a halogen mug from the inside, do not take it and choose a device that is clean, moistened with alcohol, before installing it. On the other hand, it’s opposite to the case on the ground on the zamarsyavane, it’s more preheated and just melt it more.
You will put back the lining on the arcade on the knee, the preposition from the spring and the knee, like a dump.
Lesna change to lampata
Ima and a friend are able to change on a lamp in the farovet for the mist of a Renault Duster and a lot of motoring I use, without and si they rule labor and preempt colelata and arcite to colelata. It’s terrible for theses, which nemat a lot of golemy and nyamat nothing against and work with dokosvane.
In this case, for yes, change the crank, if it is sufficient, open the capacitance on the engine compartment and, after placing the rakata between the engine and the tail, turn off the headlight for darkness. Leave and turn off the protection unit, skip the burned-out lamp and replace it with a new one (see “Changed on the top of the lining on the kalnik”).
Change the headlight
Crumpled on the PTF in the Renault Duster is not much more difficult from crumpled on the crash and the product is not a tool for additional tools. For yes, send a change, tryabva, and get access to the stand on the headlight for darkness.For yes, send a tov, dump a koleloto, a predpazitel from a prsky on an engine and fire a lining on an arcade to a koleloto, which I will partially crush. All these operations are described in detail in the mountain section in the section for crushing on krushki.
Remove the block behind the guard on the farovet and from the T-20 key, develop the two fasteners of the screw, which are whitened from the arrows in the picture along the bottom.

Premahvane on the headlight for fog on the Renault Duster
From the headlight from the saddle, montiramen new, fixed with a screw and a block connection. Leave and put the lining on the arcade on the colelata, the preposition from the spring and the koleloto on the meat.
How do you direct it, if PTFs don’t work and lamp sa incompetent
Most of the time, there are problems with fading away on the farovet for darkness, but not all of them burn out the crumbs. In this case, the case is usually replaced on the krushkit, sort it out, yama and help - or else try and go to the service, or yes, try it yourself and fix the fault. Nai-chesto cross, which you can correct yourself, then follow:
- I burned out the prepaid… Tova meaning people from the clear sky. Tova may be caused by a common defect in the prepaid material itself, an inconsistently low nominal value or a jump in tension in a burgundy mirezha. Skokove can be used for the sake of contact with energy-intensive consumers (for example, a battery) or with a generator itself.
- Sksyavane for the protection of the conductor kjm tyaloto... It’s common in these cases, when you bring the preminence of the brother to the tyaloto or the hollows into it. Predizvikva is burnt out in response to the prepositional. Ako put a new one and that old hedge, then the most probable reason for this is the connection to the conductor for a long time.
- Skysan save explorer... Vznikva in case of poor-quality crimping on a substrate or a fee laying on a sheaf.Possible cases in the izgaryan - isolation e iztrita, the conductor beat him so hard, but in front of the predpasitelyat and damage it, the conductor had time to burn out. Ako the presupposition did not fail or fail, but the new installation works, which is most likely the reason for the problem of not opening or failing to save the conductor.
- Oxidized on contacts and on conectors and substrates. After all, it appeared in the engine compartment (ashes, moisture, temperature changes). Lekuva se through simply exclusion on the substrate and connector, visual check and, if necessary, cleaning on contact.
Where is the intention of the predictor
Predpazitelat for zahranvaneto on the farovet for mist and montiran in the main kutia with predpazitel. The self-device of se namira is left from the water to the edges on the reinforcement panel. For yes, get access to it, just open the protective hood.

Fundamental kutia for predpazitel on Renault Duster and neiniya protected kapak
F31 Predpazitelyat e dissuaded for storing on the farovet for fog.
Now you know how to change the headlights in the Renault Duster fog and, if necessary, you can independently install a new headlight for the fog.
PredishnaChange on a car lampNextHow to change the headlight for fog on Renault Logan 1 and 2 phase
