Parameters and technical specifications for LEDs and ss standard size SMD 3014
Title: LEDs 
3014 smd LED characterizes high power semiconductor devices. The right voltage on the light source is from 2.7 V to 3.3 V. The current strength on the LED reaches 30 mA. Luminous flow, generated from the device, variable depending on the nominal value from 9 lm to 11 lm. These LEDs are offered in different colors and temperatures: hot, daylight, cold.
Containment: 1. Dimension and Deviation 2. Specifications 3. Where did you crawl
Dimension and exterminate
Parameter smd 3014 shows size on tosi source on lightline. Each country per device is 3.0 mm long and 1.4 mm wide. Debelinate on the device itself is varied between 0.5-0.8 mm. 3014 smd LEDs are located in the same name strip with different debelin. Most popular debelina on tape: 2.5 mm to 5.0 mm.
Dimension on the source for clarification 3014 smd
Calfjt 3014 smd e is made from heat-resistant plastic. The lens is made from epoxy material. The main characteristics for the LED source on the light bed: the surface of the contact area, which is the substrate for spreading on the light bed.
LED high brightness 3014 smd
The output of the 3014 smd LED is standard for the element and the cathode remove the label.
LED output back kjm sdzharzhanieto ↑
Specifications
The technical characteristics of the LEDs from the 3014 smd series are presented in the table.
IMENUMBERSContinuous ripple current Ifpm, mA140Right current Ifm, mA30Reverse voltage Vr, V5Dispersed power Pd, mW120bgl at light spreading at 120°Color on LED breamMatWorking temperature ToprFrom - 40 ° C to + 85 ° C Storage temperature TstgOt - 4 0 ° C to + 100 ° Soldering temperature Tsol260°
The model on the beam is shown along the length, from 3014 the light line of the beam is 120 degrees apart.
Angles on the spread on the shine
3014 smd LEDs are soldered directly into the scarf, on the surface. A similar technology for production on a lamp significantly speeds up the process on a slab and paints away for a heavy production. Instead of pre-develop the crack, body, and equipment with a miniature metal contact substrate.
LED substrates
Broy on crystallite, install all 3014 smd LED package by installation time, maybe different. Blossom for a blyaska for all produced an element depending on the goods. Contact the substrates in the joint on the light of the device with the location of the spores on the light-colored crystals, for some reason they are thrown into the preparation of the product, and the product may vary from 2 to a few substrates. In the process on the spout, the light shield elements are considered to be conductive conductors, which serve to protect from the outside of the source.
Where did you crawl
Lamps with 3014 smd LEDs can be installed in various lighting bodies, such as spotlights, which are used for lighting and backlighting.
Bulb with G4 socket and SMD 3014 LED
In addition, these devices are used in lamps, mounted in cars.
W5W LED SMD car crash 3014
Ima and lenti or metal lines and modules, which protect against 12V voltage. Those sa zdadeni are not sensible for clarification, kolkoto for using cato is an additional or main source for light.
PredishnaLED How is the LED driver and how do we choose the right rulesNextLED Specifications for SMD 3528 LEDs and LED strips