LED body illuminators for industrial lighting

For the last few years, imache significantly exchange it for artificial lighting for various purposes, such as for public fences and premises, and for housing and industry. Change the method of zasegnaha on the floor and mark it from the use of conductors and cables, as you see from the use of the source for light, from the use of the device for artificial lightening. Technically, the product should be based on new technologies and materials used in the production of cables, products and lighting devices. And in the category of sources for Svetlina, it should be on LEDs with good technical characteristics.

Containment: 1. Basic Research for Industrial Lighting 2. Applications for LED lighting 3. Types of Industrial LED Body Lights 4. predominance 5. Estimated per broy per device for artificial clarification

Environment LED product industrialize LED body lighting itself into a separate group, which is related to natural use and trseneto to the corresponding category of consumers.

Basic research for industrial lighting

Regulirat se izkvaniyata for clarification in the industry of the enterprise rules and regulations… Base sa:

• SP 52.13330.2016 “Natural and artificial lightening. Updated edition SNiP 23-05-95*»;
• SanPiN 2.2.1 / 2.1.1.1278-03 “Hygienic Research for Natural, Artificial and Combined Lighting in Housing and Public Gardens”;
• "Rules for electrical installation" (PUE) Section 6 "Electric lighting".

Finished industrial LED illuminator

In accordance with the thesis of the document, the main research for industrial clarification and determination is not on the choice of a specific source for light at a given point from space, then follow the indicators:

• lighting - normalized in accordance with the class on the visual work;
• factor on the ridges and reflections - depends on the type of source on the light line;
• coefficient for natural light - depends on the type of flock and the presence of natural light there.

Based on these parameters, they will determine the light and power on the illumination of the body, necessary for the creation of the necessary illumination in the given plain on space.

Important! The degree of illumination was set for a certain amount of land (mass, working mass, flooring, etc.). Nothing depends on the locality, sometimes this is a perverse work (conveyor, machine, etc.).

Used on LED devices in the workshop at the enterprise's industry back kjm sdzharzhanieto ↑

Applications for LED lighting

LED lighting bodies will successfully replace traditional gas discharge lamps when arranged for artificial lighting in industrial enterprises and rural areas.

Nai-successful LED lamps are used for lighting in warehouses and hangars, production workshops and open parking lots, construction sites and other industries. street lampi.

Tirsenetto for such a source for light should lie on the technical side of good technical characteristics, which makes it possible for all oshiguri to have the necessary clarification at a low electrical power. Comrade from his own country allowed and se Namali Natovarvaneto to protect the land and go for cloaks on estimates for the use of electricity.

Warehouse lighting back kjm sdzharzhanieto ↑

Types of Industrial LED Body Lights

LED lamps, such as other lighting bodies, are classified according to the following criteria:

• appointed;
• starting at the fastening of the construction site;
• kind of execution of a disputed degree of protection from external negative influences.

Led lamps are used for work and duty lighting, emergency and security use.

According to the method on the installation of the takiva device sa:

• wall - montirana on a wall or other vertically located structure;
• tavan - montiran on a tavan or other horizontal design;
• hanging industrial lighting bodies - mounting the top of the cable or a framed structure, putting it on a tavana for industrial use (prashka, okachvane, etc.);
• varhu bracket - montirana on a bracket, which is attached to a wall, column or pillar for clarification.

Models for hard goods

A friend started to artificially lighten with the help of LED devices and did not install led lamp in ordinary lamp, available at the enterprise and equipped with a basement, corresponding to the use of a lamp.

LED lamps are offered with fasungs E14 and E27, E40 and G13, which allow them to be used in conventional lighting bodies for walls, tavannas and hanging structures, such as in bodies, mounted on a bracket.

The degree of protection against external negative effects of lighting bodies is classified in accordance with the international IP code for protection, which will determine the ability of the body and guarantee that water and dust will not interfere with the damage.

Model for brackets all use for externally and externally brightening back kjm sdzharzhanieto ↑

predominance

Somehow, without a doubt, LED lamps have good technical characteristics in comparison with other similar devices. Here are some of the most important tips for LED devices:

1. Long exploitation belly.
2. Possibility for meeting the needs of a light stream with a low electrical power.
3. Niska honesty on vlnichki.
4. Instantly switched on to the lighting rod with a full power at a bright light when the voltage is applied to the contact.
5. Namalyavane on disperse for the use of electricity.
6. Those are not izskvat spetsialni technology for izkhvarlyane trail edge for use.
7. Diversity is from the offer, you are allowed to choose the model according to the type of execution, as well as from the beginning of the installation and electrical power.

Model HB led200 d60 back kjm sdzharzhanieto ↑

Estimated per broy per device for artificial clarification

For yes, determine the light on the lighting of the body, it is necessary for the installation in a certain room, tryabva and you know, follow the values:

• area per room, measured in m2;
• standard for illuminance per pelvis, measured in Lux;
• the quantity is a light stream, cut from one source to a light line, intended for installation. Tazi stoynost se measured in lm.

Know the indicators on the furnace, you can determine the illumination in the questioned flock in accordance with the formula:

Fl = En × S, kadeto

Fl - a stream of light, look for something and send it to an illuminated flock;

En is the illuminance standard;

S e area on the illuminated flock.

To know the necessary amount of light flow and the amount of that flow, emitted from a single source to light, it is possible to divide the obtained value for Fl by F into a single illuminator and even set them on the tavannite of the body illuminator at a certain place for installation.

Industrial LED illuminator LED prom 300 econom

Industrial LED body lighting is sure to fill its own niche among other lighting devices, expanding the possibilities for artificial lighting in various areas of production and logistics.

PredishnaLampy, application Pregled on gx53 LED body illuminator for opnati tawaniNextLamps, applications How can you see the linear LED body lighting