RGB 5050 Ribbon and Nine Specifications
Title: Svetlinna LED strip 
The only time to change the method for clarification is to use LED strips. They are produced in various colors, monochrome and multicolor (RGB) and with various brightness. How to use RGB 5050 60LED 14.4 W / m tape is described in the article.
containment: 1. Features 2. Main parameters and technical characteristics 3. Where is it attached 4. Calculated for clarification, then by example for a flock 
RGB 5050 LED strip
Features
LED stripe e gavkava printed scarf, top sa svyarza SMD (Surface Mounted Device) LEDs.
SMD RGB 5050 back kjm sdzharzhanieto ↑
Main parameters and technical characteristics
For yes, choose a tape with LEDs, tryabva yes, you know the main characteristics:
- brightness, depending on the size of the LED and the technology of the light per meter length;
- saves voltage;
- water resistance;
- bloom to radiance.
Brightness on LED tape
The main parameter on the LED tape is the size of the LED, measured in tenths of a millimeter and the density on the diode per meter length. Kolkoto on-golyam e size, sensible in a brightly shining ribbon. Hi-bright LED strips are produced by CMD 5050 LEDs.
Typically 60 LEDs per meter length, in contrast to devices with 30, 120 and up to 300 LEDs per meter.
Blossom on ribbon
Color on tape 5050 rgb
LED tapes are offered in various colors:
- Byala. The light nuance on this device is determined by the color temperature and the variation from 2800 K (heated) to 6500 K (cold).
- Flowers. Maybe yes, from a vitchka color to a dgata - from red to lilav.
- RGB ribbons (cherries, greens, blues). 5050 LEDs with 3 diodes.In the same color (single color), the colors are one and the same, in the RGB device they are different.
- RGBW tape. In the design of the device, the colors of the LEDs and the self-mounting of whites are illuminated, which somehow allows for better control over the colors on the device.
Leka vrazka and management
5050 rgb insert
The lights of the LED body are connected to the constant voltage. The name of the device is intended for 12V, 24V, 110 and 220V, but the most commonly crossed voltage is 12 volts.
Brightness on a single-color device is controlled by a dimer - a device that allows you to smoothly change and change the voltage protection.
RGB ribbons are controlled by RGB controllers. These devices control the brightness and color of the plaque on the tape. Control the connection of the 220 volt network. The control of this is done with a remote control or a button.
In addition to the device, in which the diodes from one and the other light up at the same time, and the device, in which the LEDs are controlled from a special chip and turned on separately, for example, the implementation of the effect on the wave. In this device, the WS2812B LED is installed. Tova is not just a diode, but a kit from a microcircuit and 3 LEDs (red, blue and green).
Cross water protection
The LED tape has a different degree of moisture protection. Structurally, the product is stav through the coating of ss silicone:
- No cover. Ima degree of protection IP 20 - IP 33. Mounting itself in dry rooms.
- Pokrivane itself from the fire, remove it on the LED. Degree on protection IP 65. You may have crawled into baths or saunas.
- From the next page, apply a layer of silicone. The inside of the bag is sealed with a silicone tube. The product has a degree of protection IP 67 - IP 68. Maybe it has crawled into pools and aquariums.
Where is it attached
You can apply RGB 5050 tape to different places:
- Window lighting. Bright brighter light up the product, and the possibility of choosing a nuance on a brighter lightening is a decorative effect.
- Lighting for the bedroom or hallway. In the standby mode, it can even be blue or green, and when the chorus will appear, using the sensor for movement or the switch, the device will also be replaced by light.
- Lighting for the aquarium or coldly darvo. RGB controller more osiguri color effect.
- Additional clarification on the patch. In the mode, the light line in the color was switched on to the maximum, the LED strip additionally added polyley and as the main clarification was turned off, then the choice of color for clarification also helped to create a romantic atmosphere. For the basin, LED tape LUX class, 5050 (4 chips), 60 led / m, RGBWW, 24 V, P 170 is good from another. . Protection rating is sufficient IP 20.
- Whenever a controller is connected with suitable possibilities, LED tape can be used for any kind of lighting and musical installation. Tova clarification is still good in pervaza.
- Modiran. RGB-tape further decorate the system unit or computer acoustics. The kit for LED lighting can be connected to a stand-alone RGB controller or the ASUS Aura card with a 4-pin RGB LED connector.
Can you send such a backlight to your own right. In the store for every city - Rostov, Samara or Saratov, they sell LED strips with any price and quality - economical, standard or premium. A well-known manufacturer for takiva lenti e honkongskata company Eleganz.
Calculated for clarification, then by example for a flock
When calculating for clarification, then the power on the lamp is calculated by the ratio to the equivalent on the lamp from the pressed button:
- in the patch of power on the lamp e 20W / m2;
- in children's flock - 15W / m2;
- in the hallway or bedroom -10W / m2.
We will send a calculation for a bedroom with an area of 15 m2 or more. The power on the lamp with a litter box for it is 150 watts. LED tapetata consumer 6 five times a little electricity, so the required power per device is 30 watts.
When the power per device is 5050 60LED e 14.4W / m, you need from 2 meters.
Protected and controlled by the pipeline and imate a 20% reserve for capacity. Therefore, power is needed for 36 watts.
RGB LED strip 5050, with the right choice, you can decorate any object or device and give comfort to the flock.
PredishnaLED strip light How to calculate the power on the LED stripNextLED strip light