Correctly put on LED tape in pervaza

Title: Svetlinna LED strip shot on LED tape around the perimeter

There is hardly the only source of light in the cold, byah, with crumpets from a hot jug. Those byaha are replaced with energy-saving lamps. Sega ima LED lamps and tapes. Tova providing a lot of opportunities for a variety of design ideas. One from tyah e illuminating on tavana with LED strip. For yes, install such a backlight, in addition to installing LEDs, you need a fillet (basement, installed on a cross on the wall and a tavan) and a special insert in the basement for the LED strip.

containment: 1. Choice for material 2. Installation

Choice for material

The result from any work up to a degree depends on the use of materials. For yes, install LED lighting in Pervaz with an insert, you need from:

LED strip ss zakhranvane;
sokl for tavan or fillet with an insert;
transparent or matte insert;
“Flow nails”, self-tapping screws or other materials for fixing on the base of the tavan or wall.

Election on Pervazi

LED, pervazi insert pervaz with backlight

Tavanniyat sokl with an insert is made from various materials - foam, polystyrene, polyurethane, darvo and many others. For clarification, it’s best to use polyurethane bases (the correct name is “fillet”).

In it, tryabva and ima measto for relying on a tape with LEDs and / or for a neuroto-fixed. Ima different start for montirana on led backlight:

On a stenata or tavana. In this case, the tape with LEDs is glued to the edges with the help of a stucco layer or a double-sided tape.
On the fillet on the head. For such a fixation, there is a special platform for moving on it, to which you can attach a lampite.
From a predestined country.If you choose this method, the LED strip from the pre-owned country on the fillet can be located in a special zhleb or directly on top of the surface. Kogato se montira varhu povrhnost, that slap for her. Some LED tapes are not placed in the tray, but they can also be covered with a matt or diffused decorative insert. The tazi insert has a curved LED and the right light is pleasant.

Selection on the tape for background clarification

The choice of LEDs and the type of insert depends on the required brightness for the backlight and design solutions.

For emergency and decorative lighting, it is sufficient to use LED strip SMD 3528 with a density of 30 LEDs per meter of tape, and sometimes use LED backlighting, which is mainly lighting in rooms, such as a bedroom or corridor, you can also use SMD 5060, with a density of 60 LEDs per meter. meter length on tape.

A lot of beautiful decorative effect is made from the use of RGB tape with a special controller. Takiva controllers allow you to set your desires for color and brightness, somehow and yes, use the backlight as a light and musical installation.

Attention! When installed on the LED backlight, it is necessary and all oshiguri locally for the storage and control panel

The power on the backlight can be high enough and for the sake of it they have been sized for storage, instead of a single block, they can install two low power ones.

Selection on LED Lighting tape ss stored

neon cable

Instead of LEDs, you can use neon cables. This is a PVC conductor that shines when exposed to a variable electric field. For the difference from the tape, the light-emitting diodes, sometimes shine on separate points, they shine on the cyalata si long. Maybe yes, there is a plastic insert in the back.Neon cable installed to start cato LED backlight.

neon cable Neon cord for pervazi

In addition to the use of neon cord, which gives a uniform light, ima neon anaconda. Tozi cable is composed of three cables in a single sheath, sometimes, sometimes it is connected with a special driver, oscillating the effect on the light line.

Other lighting devices

In addition to the LED tape and neon cable, you can use:

Gavkavi DRL (Daylight of Light). They are suitable for a silicone tube, sometimes it can shine in two colors - yellow and byal. They can be used with different lengths (up to 85 cm) and higher illuminance compared to conventional LEDs.
Cord Duralight (Duralight). This is a silicone cable with LEDs in the tr. It can be single color, different color, or RGB, which can be different colors and effects, and there is also a special link controller.

Kupuvane on a suitable fillet

First, buy pervasi from the insert for the LED strip, and if necessary, determine the required length on the fillet. Calculating this along the perimeter on the flocks and how the clarification is mounted on one wall itself, togava along the length of the wall on the tazi.

Filetto trebva is even wide enough, for yes, light it up, and when you mount it, it’s backlit from a prednat country, take a flat sticker for negativity. Fillet with an insert can be purchased at the store for building materials.

back kjm sdzharzhanieto ↑

Installation

LED tavano lighting montira se vjv fileto in two beginnings - outward or backward.

Filet despatch

Led on Pervaz Pervaz with thixo otpred

When mounting on LEDs on a prefabricated surface on the pervaza with or without an insert, fix it with a tavana and wall it inverted with the help of a pironi flow, top putty or other sculpting, depending on local conditions.When installing on a fillet, it is necessary to foresee all the costs of the bodies due to the connection to the tape, as well as the possibility of a certain excess trace on the installation.

The trace of the cato sculptor is out of the blue, light up the fixation with a double-sided tape or a stucco layer and, beforehand, remove the conductors, any excess hide back.

If the LED tape is attached to the surface of the fillet, then the work may be considered complete. Some lentata e montyrana in a special jelly, tya ce zadnitelno with a matte or diffused transparent insert.

From country to stenat

Pervaz with thixo back

When mounting on a tapeta, the back of a pervaza without an insert, it is necessary to determine the location for mounting on a tape - on a stenata, tavana, or a special pervaz on a pervaza.

Svetlinata got out into the prolukata between the duskata and the tavana, such a trebva and a little 50 mm.

Before you start the installation, on the wall (or tavana) you will draw a straight line, for which you will fix the LED tape and the base itself.

The meat is fixed on the tape, all processing from the ground for a kindly fixing on the sculpting layer, and the fillet itself, in addition to the sculpting, is fixed with a self-tapping screw. Ty kato e is attached to itself with a single rb, goods e are necessary for pogolyama health. Head on a self-tapping screw and can be puttyed or sealed with plastic tape.

Tavanniyat sokl with a plastic insert can be mounted on rak and e evtin. Such is the lightening of the flock and the more romantic mood in her.

Predishna Svetlinna LED strip How to direct the lamp from the LED strip Next Svetlinna LED strip