The reason for the blinking on the LED is the cap, which is somehow brightly turned off and how we can fix it

Title: LED

LED lamp sa nai - popularize the sources for artificial lightening of the day. Tova is not worn out - they are old, economical and absolutely environmentally friendly. But even those sa failures, for some reason they worked for them and failed. One from the chesto cross the problem e blinking. Maybe even a little bit of the situation, for the sake of some LED lightening of the moment, sometimes the lightening is turned off, most likely to meet more discussions in a natatk way.

containment: 1. LED lamp device 2. Causes for blinking on the LED lamp, sometimes the light is off 3. Methods for suspension on malfunctions 4. Rules for safety

Device behind LED lamp

For yes, you will sort it out, cause problems for Tozi, think first of all for arranging a lampat and neiniya principle for work.

LED lamps are available from:

1. Sokl.
2. Dwellings.
3. Chofiori.
4. LED board.
5. diffuser.

Depending on the view of the lampata, the design can be easy and varied, because lampi nyama diffuser kato taqv, and lamp from the type of queen and versions for the spotlights, they usually do without it.

Invariably, every kind of LED lamp, intended for connection to the storage space of 220 V, and one thing is the driver. The scheme and design may be different, but the main task is to form the necessary voltages and, in the ideal case, the current is needed to work on the LED lamp.

Design on LED lamp

So, in the case of a European lamp, the source for storage is installed on a ballast (extinguishing) capacitor. Tova e Evtina is a scheme, not a thing in a benevolent way.Because of the use of blasphemy for the protection of the LED, the lipsat for the stabilization of the current and the voltage, killing the lampat is sufficient, any unnecessary voltage over the nominal voltage in the protection of the mrezha is taken for goods. And in our editorial ima more than enough. Therefore, usually the evtinite lamps will burn out quite a bit.

In the example of the model, those are used, makar and transformerless, pulsed lowering the converters for voltage, which dori imate the reverse connection for stabilizing voltage or current. They will call it more shofyori.

back kjm sdzharzhanieto ↑

Causes for blinking on the LED lamp, sometimes the light is off

The main reason is that the LED lamp is flashing when the switch is open, it is not working, preventing the lamp from being switched on. It sounds a lot absurd, because it’s just that the chain is open and it can’t flow.

But there is a certain example of a cross-breeding option. In a golyamata, it is often from the case of problems that arise, if you have installed a switch with a backlight. Nai-chesto se from the backlight neon light or LED. In any case, for it is not ready for light, the electric chain is not needed, so that the current and flow from the phase shift the conductor has stopped.

The main reason behind blinking

In the classical circuit, on the connected neon indicator, the indicator is mounted on the switch, which is open, in contrast to the converter:

Phase - backlight - lamp off - zero

When you install a lamp with a hot plug, no problem. It’s safe to say, somehow interrupting the pres neon indicator, e exceptionally small (units of miliampere), to the point, than preminating the student’s spiral on the lamp with a pressurized flask, not predizvikva dori nai - a little radiance.

Problem with trepteneto on light, sometimes brighten sa exception, it can be washed out when the lamp is switched off from the pressed lamp to the energy-saving lamp (compact fluorescent and LED). The device is similar to a compact fluorescent lamp, but it is similar to an LED lamp, and the difference is in the circuit and the source in the light, but the design itself is not similar - and the converter is protected by the source in the light.

Conclusion: If you have installed a pre-switch with backlight, togawa tokat is the opposite of pres the lamp from any type. Yes, we are talking about the installation of LED imam. So, a small current is not enough for a starter on a converter or for a fuse on an LED, but a converter is normal for a lamp. But at the input to the source (driver), a current converter is installed, for example, a diode bridge, and a filter capacitor is installed at the output. Tozi the current is sufficient for charging the capacitor. Gradually se zarezhda, natrupvaiki energy. At some point, the voltage on the flat bench is enough for the starter on the converter (in circuits with a ballast capacitor, for boiling on a diode), then the LED turns on for a short period of time. The energy stored in the condenser is saved in the basin of Svetkavitsa and the process is repeated.

The current may not flow without background clarification, but for example, pre-insulation on the conductor, water supply to the switch (usually there are two or more, as they control a few groups of lamps); in the past, the state of the small current may be leaking at the edge of the switch. But trepteneto in this case is a little evil. Lose a lot of insulation in the electrical cabling, leading to a lot of problems, including a fire.

Ima one more reason. Ako prevklyuchatelyat decoction of nulata, and not phase conductor (somehow se ochakva).Togava lampata can be a moment of dori and without background clarification in the switch, as well as a new iztichane at zero or km masa, or even as a cable with a bad condition for insulation and conductors lie in the damp walls.

They didn’t make such a joke for you, not wines are logical and not wines, we disassemble versions from the Internet. Authors will not explain this experience, but they will explain how it is supposed to be foreseen, but here it is:

1. A source in a strong electric field close to the lamp (but how is this related to VTRESHNOTO clarification?).
2. Bad luck or old LED light (from aging, maybe yes, but it’s time for work, that is, it’s not included).
3. Capacitance on the cable line. Understand, such a reason is possible, but what consumers are trying to cause for trepteneto in the apartments and which line in the apartment can be sensible for a long time, what capacity and yes will it significantly affect the electric power supply?

back kjm sdzharzhanieto ↑

Methods for suspension on malfunctions

Vz is based on a mountain, our goal is to assure you that the key is open, it’s not contrary to prez lampite. Some razgledame method for solving problems on Tozi.

Premahvane on the backlight in the preswitcher

If there is a problem, you should lie on the background clarification, then you will miss the option. For yes, send a friend, tryabva and open the switch, turn off the trace of the voltage to the tazi line or to the whole apartment. Before you touch down the switch or other working part with a handle, it is better to check for voltage with an indicator screwdriver. Do not tryabva yes e there in time for work.

A trace of tov tryabva yes izdurpate samiya turned on from the stenat and let it go off the conductor, which will turn off the backlight, or let the module go off for the backlight (depending on the design).Collect again everything and check the result from the work.

Separated neutral conductor

The variant is more complicated, if you have externally wired or repaired, you can put an additional neutral conductor to the switch. As a result, the conductor is neutralized and the conductor is phase-shifted.

Mounting on additional resistance (shunt resistor)

For yes, save the backlight and don’t put in a new cable, try it and add a resistor stubbornly to the LED lamp.

For safety, it’s good, yes, it’s insulated with a thermocouple

The interruption on the trembling ground is further increased through the installation on an additional resistance in the verigata. Element that can be implemented elsewhere is a 2 W resistor with a resistance of 50 kOhm. The Tozi method does not work on the light indicator on the preswitcher.

Resistor, montiran in switchgear cutia

Refer to the action of e, which lit the seed from the resistor, the current on the indicator is now flowing. The answer is, that evening is not a breeze and a moment.

You can't but twist it into a resistor.

Twisted to a lamp with a pressable button

The option is not suitable for watering with a lot of wheels, so you can install a few lamps into it, you can even replace one of the lamps with a lighted lamp. Togawa stop yama yes trepnat. Tova e smnitelno decision. The resulting light type is different in relation to brightness, color rendering, color temperature. In some lamps, see that you light the screw-up and gnash, as it seems, menacingly.Yes, and the ladies' yerg of the lamp and in the scachting of the Zasnutwan in the time of the zero, the Zhichi instead of the ruler, is strange, the lamp with a junk lib, which is cheat, the flood of LED, and the consumer from the absorption, remained in the waterflower. .

Inlet with condenser

There is a lot of resistance, there is a lot of lampata from the consumer's litter box, and it is not worn out from the general view. This option is for installed on the capacitor directly on the lighting rod. Some LED backlight, capacitance and capacitance 0.5–1 μF, for a voltage of at least 400 V, some neon, togawa capacitance may be small. The condenser is more obedient to the lamp after changing the current and the indication on the switch is still not clear. In addition, the one who made the roleta on the filter run, the Catholic squeeze of embarrassment from the impulsive storage in the lampata.

back kjm sdzharzhanieto ↑

Rules for safety

Whenever you distort anything, imagine the actions, try and save the rules for safety:

1. Work on the cable itself, the trace is excluded from the warning.
2. Use the indicator to determine the phase and nulate.
3. Do not finish the stripping of the cables from the arm, start, after that, check the correctness for the injection.
4. Use tools with insulating (dielectric) dribbles - plastic or gumeni.

PreviousLEDPluses and minuses on the LED lamp for the queenNextLEDHow to choose a powerfully battery-powered LED fenerche