LEDs from the Smd 5630 series - specifications and usage
Title: LEDs 
At the moment, the LEDs confidently climbed into the stomach for a while. With the help of this ingenious art, illumination of premises and elements of building structures, lighting of architectural forms and various structures is artificially done. With input to the LED from the smd 5630 series, with a powerful light of eficacy and power, it is possible to increase even more more after using it.
Containment: 1. Product specifications 2. crawling out 3. Differences between original and copy
Product specifications
Similar to other modifications, smd 5630 LED is used in the production of LED strips and lamps from various beams, used for artificial lighting in rooms and for installation on the ground.
The LED is placed in a housing made of heat-resistant plastic and has 4 conductors, two of which are not used for some time.
The main technical characteristics of the smd 5630 are presented in the following table:light stream,
lmelectrical energy,
Woperating temperature,
WITH working current,
mASave voltage, VЪgl on lacha, degreesDimension (L × W),
mm570,5– 25 – + 851503,31205,6×3,0
The chip is designed from a substrate, some of it is well scattered on toplinat, some of it is generated by the time it takes to work on the LED. According to Tozi, he began to exploit his belly on the product.
The voltage is on the terminal on the device, it depends on the nuance on the dial and may vary from 3.0 to 3.6 volts.
Luminous flux during operation current 150 mA e 57 lm.At the same time, the LEDs, produced in accordance with the technology of the company for the developer (modification patents), can and work with a constant current up to 200 mA and a pulsed current up to 400 mA.
Dimension and glue on the source on the light
For your information! For inclusion on smd 5630, contacts “2” and “4” are used, which correspond to the cathode and anode.
Characteristics on the tozi model sa takiva kato indicators:
- high thermal conductivity;
- long operational stomach (up to 30,000 hours);
- the bottom is thermally stable;
- resistance to temperature change in the environment and vibration.
The color temperature can be warm, neutral and cold, like blue, kehlibareno, cyan, orange, yellow and green.
Rest on the color temperature for the source on the white of the light sa readings in the following table:
smd 5630 ledTsvetna temperature on Byala Svetlinaheating (WW) neutral (NW) cold (CW)Stonosti, Kelvin (K)2700 – 30003500 – 45006000 – 6500 back kjm sdzharzhanieto ↑
crawling out
For the sake of the technical parameters of the smd 5630, it has been used widely as a source of light in the production of:
- LED headlights of various sizes, working in a bit electrical network;
- lampi for cars and other exalted means:
- LED strip with different design and use;
- metal ribbons and boards, used for lighting on showcases and other decorative elements.
With the help of smd 5630, they produce LED lamps with a base W16W, T15, W2.1 × 9.5d
It is based on smd 5630 LED and is used in the production of LED strips.
The technical characteristics of the tape depend on the light on the LED, on one meter from the surface of the tape, and on the quality of the product used during production.From your country, the quality on the product depends on the reliability of the company on the manufacturer.
Differences between original and copy
For the sake of the fact, this model is in a fairly truncated way, the companies working on the lightening market are somehow known, and it’s not known that they are busy with production. Those usually include Chinese manufacturers.
Base the differences between the original models on the brands such as "Cree", "Philips", "Osram" from a copy, produced from a small company, with good technical characteristics and high reliability.
LED car lamp "Philips", model 7443 (W21 / 5W, T20) 8.0 W
Power and light flow from the crystal, from a Chinese company, which is the rule of thumb from these on the original analysis. In a numerical expression, those are up to 20% of the declared value.
Welders for LEDs from the smd 5630 series, whitened, this model is sure to have its own place among other LED sources in the light and in the world for well-deserved popularity among manufacturers and consumers.
Maybe you are interested in 
LEDs What is an infrared LED and how can you welcome it? 
LEDs How to choose the LED Fener Cree XM-L T6 
LEDs All kinds of SMD LEDs, technical specifications and markings 
LEDs Cases and markings on SMD diodes and zener diodes