How can we change the cruiser on the farovet for the darkness on the phaset Renault Logan 1 and 2
Title: Farove for the mist 
Farovete in the Dark (PTF) significantly improves visibility in bad times and then burns out the fires in tyah not just a slight inconvenience, but a serious problem, which somehow increases the likelihood of the misfortune. In the Tazi article, we’ll teach you how to change the crash for the darkness to the Renault Logan.
Containment: 1. Smyana on the mug in the headlight for the mist on the Renault Logan 2. How can you exchange your own si
Crushed in headlights for mist on Renault Logan
Before you start and change the heads in the farovet for darkness, tryabva and figure out how to distinguish the farovet in the different generations of Renault Logan and they generally made it different. At first glance, the optical devices are almost identical, but all packages are somewhat different.
Lamp type in prvata phase
Initially, the first generation of the Renault Logan (phase) was far from faulty, it was equipped with headlights for fog, despite the fact that it was more difficult to install it. In cars, you can install such a light line yourself, the manufacturer of the halogen lamps from the German company Osram with the base H11. Power per device is 55 W.
The light source is standard in PTF Renault Logan 1 until 2010.
Since 2010, the design on the headlight of Renault Logan 1 has changed a little and those straps and install the PSX24W 24W device into it. Check for light with tosi, the standard size can be yes, or halogen, or conventional with a pressurized liquid.
Philips PSX24W plug-in lamp for PTF Renault Logan 1 from 2010.
Kakva e lampata in PTF for the second logan
In the second generation of Renault Logan (launched from 2014 to the moment), the farovete was changed again for the darkness.In such a dark evening for a dark evening, a lamp with an H16 base was installed. Those are halogen, but they have a power of 19 W.
Renault Logan 2
Do you try and install the diode?
Invest in LED light now and own cars in many popular media. The modern industry is producing semiconductors and plugs with almost all standard sizes and with any kind of base. Is it conceivable that they will replace the conventional caps with a lit ss light-emitting diode in the darkness?
LED lamps for lighting from H11 and H16 bases
The manufacturer of Renault Logan is not guilty of this right, but not for the sake of it. I have read these questions from the delivery time and visited many car forums. This is a small selection from nai - often cross the reviews and opinions:
- LED lights are a lot economical and spend a lot of time.
- The trace is hushed up with the LED light, it is very difficult and very impossible to adjust the correct brightness of the light.
- The LEDs in the PTF blind the upcoming choirs and absolutely do not light up the five in front of the own party.
- LED devices will not cope with the task of si - in the snow, rain or darkness, they generally do not improve visibility.
- The power on the LED with the necessary base is not sufficient for normal lighting for five at a time.
- Ako farte is intended for an ordinary crash, but it is installed on an LED in it that is not taken away from the law (part 3, member 12.5 of the Code for Administrative Violations at Ruskata Federation).
It's important you know! Violation of part 3 per member 12.5 of the Code for administrative violations in Ruskat federation leads to deprivation of the right and control of the transport facility for a period of six months to one year with confiscation of non-standard lighting devices or devices with a modified design.
And so, one argument for, pet against.Thought, the conclusion is unequivocal: LEDs for working in the headlight for darkness, intended to work with a lamp with a pressed switch, are not suitable. Ako all the pack look for and forget about the LEDs, tryabva and buy a headlight, intended for working with semiconductors and sources for lighting. This is the only way to start and consider the effectiveness of clarification and lipsat on conflicts and with servants on CAT.
How can you exchange your own si
How can we change the cap in the PTF and can we send it without the help of a specialist? Turning it out, it’s not very sensible, it’s hard, it’s sharply out of sight on the right. Yes, you can’t just go to hell for the mist in Renault Logan, tryabva and razglobish a little colata, but razglobyavane is minimal and yama and takes a lot of time.
Whatever the trouble
And so, reshihme behind the farovet and a view of the light source on our Renault Logan, you can save it and change it. For work, no trouble:
- Key Torx 20;
- flat screwdriver;
- clean pamuchni rkavitsi or pamuchna karpa;
- back up lamps if necessary standard size.
Tova e vsichko, from something you need, for yes, change the farovete for the dark Renault Logan.
The process of crushing on the krushka
Parvata stupka, yes, skip the kalnik from the armor. For yes, send the tov, first dump the butaloto, fasten the valve of the lining on the arcade to the knee, which will develop a remote screw from it.
Premahvane on the kapachkata, fixing the kapaka kam lining on the kalnik
With a screwdriver, push the shield to the side and drive out the butaloto, somehow securing the shield to the stretcher.
Premahvane on the prefix on the butaloto kjm stretcher
With the help of a Torx 20 wrench, develop the fixing screw, positioning near the perimeter on the valve. A veche could be dumped and fart for darkness could be available.
Premahvane on the predpazhitsa prsky from Renault Logan (Sandero) 1
Important! The location is also cast on a propeller and capacitate with different modifications and generations on the Renault Logan, and it can be different. For example, it shows the dismantling process for the first generation Renault Sandero.
Pipvame for protecting the block and, on the onslaught of concluding the key, go out of trouble. The picture shows the headlights under H11, block it from other modifications on the lamp after starting, but on the Renault Logan 1 from 2010 to 2014, the connector “look” back, not remove it.
Premahvane on the substrate
On Renault Logan, from the first phase until 2010 and on all cars from the second phase, the lampata is suspended from the beginning. Turn it back on the watch hand for a quarter turn and you will get it.
Felted on H11 and H16 pins
On Renault Logan 2010-2014, there are special keys on the lampata and a special key, which you can squeeze.
Premahvane for lighting rod type PSX24W
Now I’ll rebuke the pamuchni rakavitsi and put a new illuminating thrust on the meat. We’ll save the block to it and put the preposition from the spring to the meat.
Instead, change the crash in the farovet for the fog on the Renault Logan from phases 1 and 2. Now you know that in case of such a malfunction, it’s not necessary at all and go to the service - you can send it to yourself in half an hour.
PreviousHow to change lamps in PTF for Renaul DusterNextFarove for darkness How to install farove for darkness on Prior