How to change the lamp and yes pick up the rear lights on the VAZ 2112
Back light is one of the most important lighting devices, which is a guarantee of traffic safety. Toy etozi, some showing on a motorist, some zadvayut tov, something else we’ll direct or else we’ve sent a change, such a trebva constantly and make sure you’re on the right track. In the same position, we will independently replace the lamp in the rear light line with the VAZ 2112, and we will also teach you how to stop and at a glance examine some of the options for tuning to these lighting devices.
containment: 1. Location and view on lampite 2. How do we change the caps 3. Typical malfunctions 4. How can we select stock light lines 5. Other ideas for customization
Location and view on lampite
Zadnata svetlina on the VAZ 2112 is double - it is often square in shape, the gate is on the trunk and is located close to the central wasp on the car. The location on the top of your device is somehow as follows:
Location and mission
In the picture, the numbers show:
- Warning lamp for rear travel.
- Spiral signal lamp.
And two cups with conventional cups from the P21W hotpot. The power for everything is 21 watts.
Lamp type P21W
Vtorata is often on the sennik, remove it in a close way, the name of the head is the form and the se namira is in the body. The purpose and location of the lamp in it is somehow following:
Headlight beam VAZ 2112 - purpose and location on the lamp
Tuk:
- Dimensional light.
- Taillight for fog.
- Closed indicator.
Responding for the headlight for the mist and flasher mugs P21W with a power of 21 watts. The picture on the tosi lamp type is shown on the mountain. Behind the pages of light, this 4W T4W is a miniature lamp with a pressurized button.
Cover rear page cover VAZ 2112 type T4W back kjm sdzharzhanieto ↑
How do we change the caps
Crumpled on the crusher in two feners and woods - not the necessary tools.
Zaden center
Otvaryame zadnata gates and vrhu ney amirame zadnata often on lampat. A dagger with a lamp is fixed in it with two plastic brackets and at the same time the capak is placed back on the plywood. Pinch the squeeze and squeeze it together with the lampite. In this case, storing the block is not necessary, but it is all out of the question.
Premahvane on lightline panel
Leko vdlbnahme burnt out the krushka and, zavrtayki I back to the clock hand, I’m tired of the durzhach. Put new ones on the burnt areas, squeeze them, turn up the sap on the clock hand. Fix the dskata on the meat.
Zaden yal
There is a lot more noise here. Broth zadnata vrata and before fener namirame valve in tapiceriata, closed with velcro. Otvaryame go and vyzhdame often zadnata on illuminating body.
Glovat svetlina e skrita butt valve in tapiceriata
Rear often fixed with plastic keys. Stiskame gi and izvadame duskat together with onions.
Premahvane on lightline panel
The lamp behind the indicator is located separately; Izvedam burnt out (squeeze and twist), install new (squeeze and twist in the back of the wind).
Crushed on tops in the head of the rear light line VAZ 2112
Fasten the panel to the meat, close it with a valve.
Typical malfunctions
Izgoryalata krushka, sort it out, it’s not the only malfunction on the back of the light. That one can be refused for many reasons, the main thing from which we can see more:
- I burned out the predpasitel;
- Oxidized on the connecting block;
- Malfunction on the lighting device itself;
- Malfunction on the relay on the prekvacha (itself for the indicators and the alarm);
- Malfunction on the extreme switches (spiral light, signal for the reverse move);
- Schupen zahranvasch conductor or koso k'm tyaloto.
Verizhni prekvaschi
The problem with the suggestioner is beyond resolving. Decoction of the assembly block, which is se namira to the left of the feed colon and is fixed with a mechanical bud.
Mounting block VAZ 2112 e fixed in panel with bud
The onslaught of the bud, the collapse of the block and the check of the correctness, follow the suggestions:
- F1 - page bright (remove to the left);
- F11 - page bright (gum board);
- F16 - zahranvane on the relay for prekskvane (zahranvane, alarm);
- F17 - spiral light;
- F19 - indicators and rear travel;
- F20 - taillight for darkness.
It’s not difficult, but you need to insert the inserts - the numbers are exactly on the panel on the mounting block:
Location and designation on the relay and suggestion on the mounting block VAZ 2112
Substrates and connectors
Follow the problems on the connector. Those can get moisture, but they will oxidize or burn out. Scheme the focusing devices on the top on the connection (section “Scheme on the connection”), without excluding the substrate from the base, which is not taken for the notes, which is connected to the mounting block. Checking the state of the contact: those trebva and sa clean and caress, without residue, watch out for oxidization or fumes. Clean or replace as needed.
Place on the mounting block at a position from the rear.Develop the fixing screw, remove the dam and remove the mounting block.
For yes, skip the mounting block on the VAZ 2112, enough to develop a single screw
When dismantling on the mounting block, we will not ruin the fixing bracket, which is fixed with a screw.
Fenerche
The fault on the lighting device itself is quite crossed. For yes, solve tozi problems, fenercheto is not a tryabva and this is a dump. Suffice it to skip the rear panel with the lamp (see the section "How to change the cover") and remove the block from it. And zadnata svetlina, and glovat svetlina izpolzvat gavkava printed kerchief.
Removal of the panel on the headlight ceiling VAZ 2112
Carefully check your paper on the printed handkerchief for chupvane, burnt or oxidized. What is necessary, clean (oxidized), “lekuvame” with a poialnik and parquet t'nka tel. Ako "treatment" is not possible, just kupuvame shawl and I montiram instead of unsuccessful.
The tablata on the back and the glovia (lav) lampshade on the VAZ 2112 can simply be purchased
Check the contact for cassette and lampata, clean as necessary. Ako can’t be repaired, we’ll change it.
Deliveries for lamps (free) P21W and P21W + T4W
Relay–prekvass indicators and alarms
The relay of the world in the mounting block under the number K3 (see the picture from the subsection Prepastors). From time to time, the relay from the block, including the fuse, turning the key behind the turn and from the brocade of the bodies, sequentially contact 49a-49 and 49a-31 on the block. Ako brighten up for flashing lights, change the relay.
Extreme switches
Prevklyuchatelyat, dissuaded for the lampat for the rear move, se namira to the speedy kutia and se zatverya automatically when turned on to the rear predavka.Turn on the flare, tear the block from the extreme switch and close the contact between the mu and the tyaloto (engine or kutia) with the brocade of the bodies. Ako signal light, change of extreme preksvach.
Checking for extreme switches for the rear travel VAZ 2112
The last switch on the spiral light line works automatically, but when you press the pedal on the spiral, that light rep. Namira is in a compartment above the loss on the pedal and is equipped with two linings with a single shift.
Krainiyat prekshvach on spiral svetlini ima two overlays
From time to time, back it up, turn on the zapalvaneto and zatvarya, contact on the lining with the brocade of the bodies. Ako "krakata" are burning, changing the extreme limiter.
Electrical installations
Once again, save the conductors sa on the kaso connection to the tyaloto, answer the predpasitel in an amusing way. Newly burn or vednaga the trace of the installation (“reliably” zatvaryan), or redovno in time on the shofiran (it was zavaryanet when it was received by vibration and trepere). In all cases, the reason is that the insulation is depleted. Nai-probable places for damage: change to the harness of the ribs on the weight, move these parts and when you change the predupki to the weight.
Stupvaneto this case is a lot in order, just ahead of it and if it’s completely wiped out, then it’s even better and now it’s close to heavy, let’s time for a twist on the problem.
Carefully check your answer to save the sheaves, namiram, eliminirame with electric tape and, if necessary, a soldering iron (without usukvane!).
Scheme on the wire
But first, remember and troubleshoot the wrong VAZ 2112 lamp, otherwise it will be useful and you will recognize it from the diagram on the neuron. The diagram for the connection on the blinker on the VAZ 2112e, as follows:
The scheme is connected to flashers VAZ 2112
Lamp on the rear light line the designation of the tuk with the number 6 and se activate, once the key is ignited 3, turn it on from the switch 7. The relay-switch K3, located in the mounting block 2, is dissuaded for "flashing".
The diagram for the connection to the spiral of the light line, rear pressure and size on the VAZ 2112 is as follows:
Wiring diagram on the external lighting device VAZ 2112
Here the number 6 indicates the page of the light line, 7 - the spiral light line, 13 - indicator for the back move. Size all activator with switch 3 and it is not necessary to include all igniter. Spiral light all inclusive from the edge of the switch 11, back travel - from the edge of the switch 10. These signaling lights are very bright, the key behind the igniter 4 is turned on.
How can we select stock light lines
According to the principle, rear light lines on the VAZ 2112 have optimal light characteristics, so there really is no need to pick it up. The only thing that you can easily pick up their appearance and even direct them in an economical way is to replace the lamp with the lit LED light. Nai-lesniyat (but not nai-evtiniyat) start and exchange the external view for fenercetata e yes gi replace with the original. For example, call this "club".
The rear tubers of the light line look much more representative of the standard.
How yes dumped and razglobyava back lights
But as soon as we seek and set up standard light lines, those first tryabva and bdat dump and globe.
Rear lightening
Ass light, which is excused for spiral light and rear speed, you can dump it. Broth zadnata gate, izklyuchvame zahranvaschiya block from the lampat.
Premahvane to protect the block from the back lamp VAZ 2112
Scrape the stiskame and premahvame the panel with a dash and lampite.
Premahvane on panel on fener
With key 8, develop 2 nuts to secure the device.
Nuts for zadzhane on the back light line
Loosen up the 3 fasteners of the nut on the decorative reflective lining, and the fourth, located close to the lamp, some trembling and even premahnata, this is out of the way.
Partial dismantling on decorative tape
Get a capaca and get rid of the fenerceto.
Zadnata Svetlina veche may be dumped
English fener
Decoction the gate on the trunk and develop four screws, fixing the tapiceriat on the trunk close to the lamp is matted - two at a distance, remove two.
Partially dismantled on the tapiceriata on the trunk
Sgvame tapitseriyata and vizhdame zadnata often on the lampata.
The bulbous VAZ 2112 lamp is located at the back of the tapiceriata
From time to time, protect the block from the device.
Premahvane on the substrate
With the help of an 8-slot wrench, develop and rub the nuts, securing a bright device.
These nuts are fixed
Stretch the device back along the slope to the exalted means and get rid of the karoseriat.
Premahvane on a glotty lamp VAZ 2112
How splintering
For pity, back the light lines on the VAZ 2112 don’t sagvaem, such a yama and this tax and splurge, but yes, you can, but for yes, you can do it better and be repaired. Comrade may be of two beginnings: slashed on a tyaloto or ryazan with a burning knife. In the first case, it’s convenient and use the circles to harm. Ako yama consoles and if you don’t want to buy a gi, you can use a fragment from an ordinary hacksaw for metal.
Razryazvane on the fener with the round nozzle
For yes, apply the second method, schevi trebva knife and gas stove. Dirty knife and ragged fener along the perimeter.We’ll get rid of the glass, clean the whiskers and melt the places with a saw. Barbarity, take it apart, work.
Dismantling on a zadnata light with a burning knife
In the forest, yes, swallow the fener - just twist it in half and fill it with a mold, for example, "Moment" or similar. For yes, prevent it from falling apart on the fenercheto, dokato lepiloto from the dry, first you can, yes, you can take part with a soldering iron to a few points.
Sglobyavane on the device for rear lighting VAZ 2112 back kjm sdzharzhanieto ↑
Other ideas for customization
Somehow, in a bad way, the lamps in the fenerite can be replaced with LED lamps. And don't just dump the crusher from the hot box and fold the LED takiva, but use LED modules or tape. In the opposite case, the view on the LED light is not so different from the usual. Installed on LED modules can be as follows:
LED modules in the headlight / headlight for fog
And with the help of the LED strip, you can direct your way:
Options for adjusting the rear light line with LED strip
You can just lighten up the tonirate, then completely exchange the external view for a car and, in the forest, apply the tone of the country’s top view to glass. Comrade, let me not break the lighting devices or get rid of the car.
Toniran rear lights VAZ 2112
And in conclusion, a little video demonstrating the possibilities on the LED module, which can be used for setting up the rear light line on the VAZ 2112.
This is the end of the conversation behind the rear lights on the VAZ 2112. Now we can forestry and skip these lighting devices, as necessary, even if we repair, modify, or simply replace the burned-out fenerite.
PredishnaChanged to a car lampNextChanged to car lampsChanged to lamps and adjustment to rear light lines VAZ 2114