Change to lamps and adjustment to rear light lines VAZ 2114

Every chauffeur knows the sharp inconvenience of driving a car away from a non-working rear light line. In the basin, we’ll also teach you how to change the lamp in the rear light line to the VAZ 2114, and if we look at it, we’ll fix the faults on the lighting device and fix all the details ourselves.

Containment: 1. Kakvi lampi ima in the rear light line on the VAZ 2114 2. Crushed into bowls 3. Scheme on the wire 4. Rear lights repair 5. How and how can you change the standard lighting 6. Ideas for tuning or revision

Kakvi lampi ima in the rear light line on the VAZ 2114

Hatchback with pets VAZ-2114 (LADA Samara) is a restyled model on the VAZ 2109 and, consequently, the rear lights and lamps in the tyah are almost indistinguishable from each other. And in the two versions on the VAZ in the rear light line, two types of caps are used - P21W (A12-21-3) and T5W (A12-5). Parviyat ima power 21, second 5 W.

Lamps P21W and T5W, used in the rear light line on VAZ 2114

P21W turn signals for flashers, stop lights, turn signals and rear lights for darkness. Crush the T5W with size. You can also see the location on the name of the lighting device and the destination on the image.

Location on the lamp in the rear lamp on the VAZ 2114 (in the picture there is a plate on the lamp)

Number on the picture of sa markrani:

1. signal for spirane;
2. progress indicator;
3. headlights for fog;
4. page light;
5. blinker

back kjm sdzharzhanieto ↑

Crushed into bowls

Let's change the rear caps now. Povdigame trunk and trsim in tapitseriyata valve, located cross-section of the device.

Remove the lampat on the trunk e covered with a Velcro valve

The decoction of the valve (the same on the “Velcro”) and the observance of the zadnata are often on the lamp with the supplied protection.

Back part of lampata VAZ 2114

Izdarpvame of the block, which is the durpame of the central os on the machine.

Important! Broyacht on the block e metallization, applied on top of the gavkavat board. The premahvame of the block is attentive, in case of an unsuccessful rupture, we will try again and change the tsyalat duska.

The squeeze of the key, located away from the lampata, some of the world is close to the center on the machine, and removes the dagger together with the lampite.

Premahvane on the scoreboard on the lampata

Razgvame daskat with the inclusion of the light line and observing the picture, shown in the picture in parviya section on statiyata... The lights of the lamp are moving away one at a time and eating the beginning - they will turn it back on the clock hand. Namirame was burned out by a lamp, I am replaced by a new one.

Changed to the indicator lamp for the back stroke back kjm sdzharzhanieto ↑

Scheme on the wire

Rear light lines on the VAZ 2114 by tying the burgundy veneer onto the car through the substrate, which is given in the bottom.

Location on the block on the rear light line VAZ 2114 and flower on the conductor

Number on the picture shows:

1. pitepokazatel - blue (vdyasno), blue - black.
2. page light - yellow (vdyasno), yellow-black.
3. spiral signal - red.
4. headlights for the darkness - red-black.
5. the indicator for the reverse course is green.

And two light lines with a connection to a single harness, which is sometimes backed up by a caroseriata from the headlights to a lyavat, followed by a passage on the country to the port of the installation block, located in the compartment on the engine just behind the front, the glass crossed the water.The wiring diagram for the electrical equipment on the VAZ 2114 (injector) is as follows:

Complete wiring diagram for VAZ 2114

In the basin, the scheme is blurred from marking positions:

• 20 - switch for the light line for the back move;
• 26 - the block is mounted for the pre-positioners and the relay;
• 27 - preswitch on the signal;
• 29 - key for zapalvane (zaklyuchvane);
• 33 - the key for the back of the light line for the mist;
• 35 - combined switch on the page light and headlights;
• 36 - alarm key;
• 58 - rear lamp;
• 60 - additional spiral light.

back kjm sdzharzhanieto ↑

Rear lights repair

The best reason for the damage to the rear light on the VAZ 2114 is the damage to the head of the printed circuit board or the connector, directing it directly upwards with conventional metallization. You can, sort it out, just buy a new printed handkerchief and replace the defective one with it, but first of all, in what time?

And secondly, we don’t tremble forest birds. So much more than this experience, let’s stop the troubles themselves, with the minimum disperse and so from time immemorial. We’ll bury a certain one from the connector for tying to the fener of a burgundy mrezha. Looking like this:

The connector for connection to the back of the light is a burgundy merge, often from the gavkavat of a scarf and cannot be changed separately

Ima cause a lot of damage to the tosi connector. For example, firmly protect the block from the fenercheto and just partially from the trip, watch out for a lot of small debelin from the copper deposits of the plastic material. Another reason is to keep a close eye on the connector to the connector to avoid constant vibration. E, nai-obiknovenoto - from pre-tovarvaneto or zatvaryaneto on a pistat, those outcasts.

For the sake of the flames on the conductor, the birds on the gavkavat of the handkerchief, back the headlight for the darkness do not burn

The picture shows the connector behind the fence from a different modification, but the problem is not clear. Vsichki theses, you can ask for a solution with a soldering iron, a mounting conductor and a conventional pole-pin (sharp pins, possibly more) connector with an analogue.

For the repair of a joint, it is necessary to have a block with an analogue

Clean up the connector on a dskat with a humichka for a student (not a skin - there is a lot of folio!) - and gi service.

Tryabva and kalajte kolovozit with goodness, a lot of barzo will burn the poyanik. In the opposite case, write just a little more from the substrate.

Get rid of the block from the block to the car, for example, do not take it away and mark the mark, fill the meat for soldering with a sealant or a thermal gun is sculpted.

Hinged block

Otryazakhme standard block for zahranvane and on a non-government place zapoyavame often with new. Sglobyavame fenercheto, svarzvame go burgundy mrezha - and go check. Ako didn’t mix with the design on the backing, togava still work all the time with grum and shaking.

How do you direct, how do you follow sa burnout or stupidity? You can get out of the situation of the last beginnings. Vednaga trace schupvaneto clean the protective varnish from follow, kalaidiswame, drunkenness of the block. Another look like this:

You can use the connector all the way on the gavkavat of a scarf

You can, sort it out, and limit it to tov (until the next step), but if you separate a little more time and effort, you can send a serious repair. Modify according to the tosi of the beginning of the fenerische, they serve faithfully for many years. So, save yourself from the eternal problems in the repair of the standard cartridge on the krehkit - there are many faults on the fenercetta VAZ 2114.

For yes, implement the same idea, in addition to the block with a pole contact with an analog (see it in a mountain), you can try a pet case from the VAZ 2106 indicator and a terminal for the tyah.

Shche vie tryabvat 5 taqiva cartridge and 10 terminal for tyah

Izvadame lamps, standard contacts and printed circuit board from the panel. Put the cassettes on the correct places on the panel and mark the center to them. There is no special precision here, but the main thing is that every lamp shines in its own “seer”. Punch holes in the diameter on the base of the parts on the cassette.

Open up the cassettes

Open the cassette in the vmkvame, open the mount, open the marker, punch the gi, screw the screw. Cassette veche sa soundly fixed in the panel.

Fixirame each cassette with two self-tapping screws

With the help of a mounting conductor with a glue (you can even bend the pliers from the back and even drink it for vernnost), the chain is loosened, some of the repetition is cabled onto a standard printed circuit board. For variability, the seal can be insulated with a heat-sealed pipe, but in principle it is not necessary - a panel, on which to attach cartridges, and plastics. Zapoyavame our block kjm borders on the conductor.

Tozi is blocking a more advanced lighting system on the car.

Zapoyavame double on block kjm zakhranvashchiya cable on fenerite, kato predita otryazakhme old age. Nie go zapoyavame, not go usukvame. Usukvane still oxidized a trace of a week and it’s problematic to zapochnat again - then burn, then do not burn. Izoliramed sheva with thermosweatable or pamuchna (black parsal) tape. PVC insulation tape is an extremely poor option. Maybe yes, it’s a mess with the course for a while. Tazi isolation is not good.

Everything is ready, you can twist it and check it

Take a look at our work for a few minutes, vmkvame lampi, svurzvame, verifiyvame. Do you work vsichko spored ochakvaniyata? Take the fener, svzvme go.

Fenerat e on the spot, vsichki problems are solved for a long timeLED analog P21W back kjm sdzharzhanieto ↑

How and how can you change the standard lighting

Nay-lesniyat start and change the appearance to colata si and change the lighting of the body from the original. The gamut from the lamp on the VAZ 2114, sorted out, is not much wide, but Ima from whatever you choose. And one simple beginning - for some reason the setting is fresh to “stop the standard, put it on the buy”. Some skitame from the store, but we can see how we can and now intend for our VAZ 2114.

Feneri "Osvar" - A popular option for automotive enthusiast environments. Those sa comparatively evtini and no problems for the namirans. There is only one thing that the manufacturers use to put a cap on it, but if you wish, you can replace it yourself with LED. In spite of the respect of the owner of the cars, the goods are not of value.

Rear light "Osvar" on VAZ 2114

skyline style... There is a version for "trba", but it looks completely different.

Rear light lines in Skyline style for VAZ 2114

ProSport RS-02020… There is also an LED option. Vyarno e, electric crashes, dissuade for distinguishing signals in ty, obviously not in the right place, you can stop the participants in motion a lot and the inspector at the CAT is definitely not clear.

Rear Light ProSport RS-02020

ProSport RS-02020-T. Everyone will shut down the ProSport with the lights off, but the blackouts on the glass. Truly a gift for CAT!

Rear light ProSport RS-02020 with tinted glass

ProSport RS-07490… Option from the top. The manufacturer will tell, there is a misunderstanding - flashing between the size and the stop light.You can't take it apart on purpose.

Rear Light ProSport RS-07490

"Zigzag" 0013L… This is such a LED miracle, proposed by the manufacturers from Toliati — native to the VAZ car. Tuk pone signal sa mountain-down to the locality.

Back light "Zigzag" 0013L

With Comrade Pazaruvaneto zavarshva, in spite of everything, we still have a lot of miracles. Some just look briefly at the video for the fenerche with flashing worms and let's skip the next point.

How can you miss the back light

In time, you will figure out how to skip the light lines, and install new ones. For yes work, you need a wrench with an 8 wrench and a Phillips screwdriver. Open the back gate, use a Phillips screwdriver, and then dismantle it often from the tapiceriat, so why, I’ll fire it up, and then have access to the back of the back part of the lampata.

Tapiceriata e is attached to the tyaloto with a self-tapping screw

Namirame 4 nuts around the perimeter on a light device and a key from the key with a wrench

Fenerat e secured with four nuts

Carefully remove the connector, which is used to cut the central valve on the car. We don’t lie here, but simply drpame, drink here and don’t twist!

Premahvane on the substrate

Izdarpvame lampata izvn kolata kam se si and I mahame.

Fenerat veche may be dumped

Installerama new lighting project in reverse ed.

back kjm sdzharzhanieto ↑

Ideas for tuning or revision

And last but not least, some ideas for tuning. The only thing is that it is turned on by conventional super bright LEDs in a cylindrical shape. Take a picture down the valley, the idea is good enough and not a special explanation. Beauty is not like modernization, it’s free to act and absolutely new solutions, which nemat “twins” to drink.

1 2 3

Algorithm for setting up the rear light line using LEDs

Possible result from work

Instead of separate LEDs, you can use a multicolor LED strip.

In the store, you can try a pandelka from everyone

Understanding this, you can’t and “formate” nothing from it, but you don’t need to but gloomy a complex circuit with shock-absorbing resistors and yes, you can connect the LEDs. You want to tear off the brocade and that’s ready for connecting the burgundy mrezha.

Important! LED tape can be more rare by itself, whiten the top of the samata tape with pictograms for knives!

Tuning lamp with LED strip

And, take it apart, LED modules.

Customization from LED modules

Now tonic. Nay-lesniyat start and send the comrade from the blooming battle. Zalepvame "garba" on kolata with messenger and thixo. Color in the same way, follow the instructions, imprinted on the cylinder.

Tonirane for rear lights VAZ 2114

Chakama is afraid to dry out, if necessary, apply another single layer (without fanaticism - fenerite trebva and shine!). Mahame of the herald and the recipient of the result. Obviously, it is not necessary to bloom with red (worm is simply undesirable) bloom. Ochilata can just be darkened.

The result of flowering

So know the rear light lines on a VAZ 2114 car, learn how to repair it, change the crashes and give some ideas for tuning to these lighting devices.

PreviousHow to change a lamp on a carNextChanged car lampsRear light lines on VAZ 2109 do not shine - repair and revision