Vtreshnoto clarification on the VAZ 2110 do not shine - how can you change the cap
Dokato shofirate, no one, take it all apart, I didn’t use fener for bad lighting, but you can’t go to the parking lot without it for the last night. In the basin, we are still analyzing the schematic diagram on the connection to the third-party clarification on the VAZ 2110, but we will also teach you how to change the crank into it.
Containment: 1. Kakvi sa lampite 2. How do you change the krushka ss own si ryce 3. Scheme on the conjunctiva and location on the prepasitelite
Kakvi sa lampite
Vtreshnoto clarification on the VAZ 2110 is provided by a tavanna lamp, which is from a lamp with a pressed C5W (AC12-5-1) with a power of 5 W.
Lamp, used in the main lamp on the salon
On some modifications to VAZ vehicles, this type of navigation lamp is called (individual lamp for clarification). Including all with a separate key and regardless of the main tavanna lamp.
Navigation lamp for VAZ
If so, the imam also needs a 4W T4W (A12-4-1) lamp.
Fener lamp with individually lighting
Hello! Can you sort out how to lamp and ima into other lighting devices VAZ 2110 in the state "How do you choose the tops of the ima in the farovete on the VAZ 2110 and which ones you choose».
How to change the electric plug ss own sir
Razbrahme view on the krushkit for good clarification, now all the experience and let's replace it with your own original, without yes, you are a specialist. For yes, open the lamp in the cabin, without it, feel nothing, tryabva, but you know, the structure is not approximately the same.
Such a thing, structurally, the illuminators for the salon are all from the heat and the ceiling from the organically glass. The ceiling is directed movable - maybe more vertically, for yes, turn on the mode, remaining on the luleene of the world in the center.
And in the two positions of the plafont, which at the same time acts like a switch, e fixed, two modes for working on the lighting rod:
- Svetlinata vinagi shine.
- Shine the lamp, open some of it from the gate.
Design for lampat VAZ 2110
In the picture in the mountain, digits show:
- Kadar.
- Plafond.
- Wasp on the lyuleen.
Two sills on the glass, which sa stay on the lyuleena, and the only latch, which prevents falling on the lamp from the body to the lamp. According to the tosi, start, for yes, skip the kapak, and it’s enough to put a screwdriver between it and the tyaloto and yes, squeeze the tyaloto navn, to release the drainage. The screwdriver is still placed, disassembled, until it ebbs on the ceiling.
Hello! You can fire a fish at a kutiyat without and use a screwdriver, it’s self-righteous. In the forest and in a safe way for a glass on a sennik.
You can squeeze the fish on the hulls on the lampata with the goli ryatse
Onslaught, kato izbutvame tazi country on the plafond navn, liberating the second fixer and izvadame stakloto.
Premahvane on the ceiling from vtreshnoto clarification on the VAZ 2110
Under the plafond, we observe an electric muzzle, captured in a spring clip-contact.
Fener sas dumped sennik
The squeeze of the krushkata kjm is one from contact and I’m tired of it.
Izvadane on the crash
Na mestoto na izgoryalata, montiram nova and shrakvame kapaka na measto. For yes, send Comrade, startirame one from pinch, the onslaught of the second country on the ceiling, lightly groan at kutiyat with nokt.
Checking for fener with a newly installed lamp
You can see in detail the process of crushing the head into the lamp for brightening the VAZ 2110 vv video down below.
Smena for lampata in salonnata lamp VAZ 2110
Somehow it was whitened, in some modifications to an exalted means, in addition to a tavannat lamp, an individual lamp was installed for clarification, located between the water and the nursery. How to change the mug into it, you can watch the video for a while.
Smyana on the krushka in fener for individual clarification on the VAZ 2110
Scheme on the conjunctiva and location on the prepasitelite
Row, but this is the case, don’t drive the result to the desire: the fenerceto still doesn’t shine or it doesn’t work from the mode (don’t work correctly). Ima not a problem, which caused a malfunction, and almost everything from tyah can and will be removed by themselves. Kato began, there was a certain electrical circuit behind the connection to the lighting body in the kolata of a burgundy mrezha.
Electric string on salonnata lamp
The scheme is quite simple. The voltage is with positive polarity pre-positioned in the mounting block of the lamp and the lamp is constantly present on the lamp. In the left position on the pre-switch, it is enclosed in the ceiling, the outlet on the lamp is closed, the lamp is closed (minus it is stored) and the lamp is constantly shining.
Ako move the switch to the position shown in the diagram, then the second is the output on the lampata and is connected to the extreme switch, the location in the rack on the four gates. These are the extreme switches sa connected in parallel, and the second is the exclusion of everything from tyah e connected to a tyahoto. When you open some of them, turn back, the edge turns on and connects the lamp with a light - light in the compartment of light.
Now think a little for the suggestion, osiguryavshch vtreshnoto clarification. That se namira in the assembly block, which is from its own country se namira under the scoreboard left from the vodach.
Location on kutiyata with prepositions
For extraneous lightening, an F17 with a nominal value of 7.5 A was dissuaded. You can see the location of it in the picture below.
Number and location on the prepastel in the mounting block VAZ 2110
So you will learn how to independently and change the lamp in the salon lamp on a VAZ 2110 car.
PredishnaTremendously brightening Treacherous lighting on the VAZ 2107 do not shine - how and change the crowns and which ones are necessaryNextBad lightening Don't work on the VAZ 2114 for bad lighting - how can we change the lamp?