Presence and design on lampite with G5 base
Title: Zokli 
In the midst of a lot of variety from the base behind the lighting of the body, fix takiva borrowed significantly from the market. One from tyah e founded G5. Use all fluorescent and LED line lamps. In the tazi article, we will also examine the characteristics and girth.
Containment: 1. Characteristics on design for G5 plinths 2. Type of lampi 3. Where did you crawl? 4. Conclusion
Characteristics on design for G5 plinths
The letter G in the marking on the hood means four shifts, and the numerical distance is in millimeters between the shifts. That is, a lamp with a G5 base and two pins at a distance of 5 mm is one from the other.
Type and dimensions based on G5
Tazi contact group is installed from the second page on the tube. Tyahnoto destination depends on the view of the source on the light:
- In fluorescent, you need to tie the helix together.
- Behind the LEDs, the phase and zero are connected to the circuit, according to the diagram, the lamp is placed on the package.
Delivery per lamp
The socket behind the base of the G5 has the following design: directed under the format on the brocade dielectric material with a slot slot and a contact group behind the pin. Te sevkarvat in osnova and sezavrtat, dokato sprat, and then something else sensibly leko shrakvane, tova vikazva, che shiftove sa on the meat and lampata e fixirana.
Cassette G5: external view
Similar
Wednesday, base for the needs of the source for light, in addition to G5, it is popular and founded by G13; the type of traffic is slightly different, which is distinguished primarily by debelin and the stream is bright.
Deserving of this whiteness, you can install it in the G13 base through an adapter.
Type of lampi
In addition to the view of the source on the light, first tryabva and turn your attention to the view of the samata pipe, those sa:
DesignatedDiameter in inchesDiameter in mmT44/812.7T55/815.9T88/825.4T1010/831.7T1212/838.0
Tazi marking is explained with diameter in part from tsyal inch, you can see tova in the second column on the table.
Such a spored labeling of the se was determined by the need for more se bere in lampata or not. Osventova all the same, the diameter of the answer to a certain basis or group of the basis.
Popular with T4, T5 and T8 types, and the effectiveness of reflectors depends on the diameter of the tube. In addition, T5 is a clear stream from your colleague's "debeli".
Comparison for lamp tube size
T5 usually ruled with G5 base / base, T8 with G13 base / base. Naturally, there may be exceptions, for example G5 on T8 lamp… They are similar, but the direct data has been changed without pre-projecting for storage is not acceptable. In addition, the design on the reflector and the illuminator itself are different.
Somehow bleached early, use fluorescent and LED lamp equipment with such connectors. Distinguish the secrecy in the light stream, consummation of energy and fact, that the LED models are not artificially electronic or electromagnetic ballast stored by them, but work directly from 220 V. , somehow e is shown in the figure along the -dol.
Scheme for converting a lighting rod from a fluorescent lamp to LED
That is, tryabva and get rid of the starter and send the connection to the throttle or even shut it off completely, and stop the two conductors and screw it together.
The advantages and disadvantages of any type of lamp are much dependent on the specific model and manufacturer.
Where did you crawl?
The girth for the application on the lamp tube with G5 base is wide enough:
- Illumination at work places in production, but not allowed by itself when used on electronic ballasts, such as a source on the storage of a fluorescent lamp.
- Lightening office with muddy body lights.
Rasterna Svetlina with T5 lamp
- Warehouse lighting. For a long time, the source is linear in the light, and allowing and illuminating the golyama of the area with the same light stream.
Warehouse lighting
- Clarification at the autoboyage workshop. And here is the premise of this, given from a long time, the design is, somehow, reflecting it from the surface on the part of the caroseria on the car, allowing you to see the shortcomings in time in the boyadiswana, small vdlbnatini, shagreen, petna and other shortcomings.
- Near the house or in the apartment, they are actively used in the kitchen. Lighting bodies with a G5 base are installed under the kitchen furniture over the working area, when you are at home, you can eat or store.
Kitchen lighting
Conclusion
Based on the G5 shield, it is not very convenient for use, you need a light source for lightening it is often used for clarification in any kind of room. Those give a uniform light stream along the tsyalat long, some rule can be organized for good. general lighting system. The name of the forest has been crushed, the only drawback is that the organization of the trial will say something about the fluorescent light source, but these problems can be solved through the confusion with LED taquiva.
PredishnaCar lamps Purpose and types of headlights for carsNextSkirting boardsCharacteristics on base E40