Gu10 lamps and tech apps

Title: Zokli

Illuminate the lamps only from the required and may be bi-needed devices. You can’t do anything without tyah on a daily basis, nothing at work. Dnes ima is huge broy krushki from nai-different types and purposes, among which devices with a GU10 base will occupy a niche.

Containment: 1. Construction on base / plinth GU10 2. Type of lamp with base GU10 3. Where can I use the telat from the GU10 connector?

Why do they produce such a lampi and why do they do it better from the classic sea colleagues with a threaded base? For yes, dissuade the question from tosi, tryabva and sort out the design on the tosi, you get the original connector and in some time, and sort out the girth for the application on the lamp.

Base/plinth design GU10

Tozi connector is a type of pins and there are two pins that act as conductive contacts. The main difference between the GU10 and other bases from tosi type e is sealed in the edges for all contact.

Lamp base GU10

Thanksgiving on the thesis of strengthening, the lampata is soundly fixed in the light source and yama, and even out of the blue, spontaneously from the delay in time for work. Another predominance on tosi design is for a short time after being installed in the case. So tryabva and all the screw device with a classic basis, some predit e “hvanalo” of the end, togava GU10 just tryabva yes all in a car in the open and easy and se varti.

It was installed on the lamp in such a way that it would take less than a second.

What is it about marking on such connectors, it is not difficult to do anything in it. Consist of two letters and a few numbers. The letter is showing that the connectors are male and female.The numbers on the marking correspond to the distance between the pins in millimeters:

Distance between axis to contact to base GU10 e 10 mm

back kjm sdzharzhanieto ↑

Type of lamp with base GU10

Today, manufacturers of equipment have a wide variety of types of lamps with a GU10 base - from LED to live. On the ground with the base GU10, you can choose four types of knapsacks:

1. Halogen.
2. LED.
3. Luminescent.
4. Metal halide (xenon).

Vsichki those are intended for solving similar problems - spot lighting, but they work on different principles and they differ significantly in characteristics.

Halogen

As a matter of fact, eat the crumbs from the jar, but in a brighter way. Due to the increase in temperature for spiralate and special halogen additives, the spectrum for tyahnoto radiation is practically the same as the spectrum for slanchevat light line, it is known for horata. They can work with a dimer, but in the low brightness mode, they will turn into flakes from a hot pot with a chervennik into a spectrum on the screen. Lack of halogenite devices with relatively low efficiency and high (250 degrees and higher) operating temperature on the crankcase, somewhat limiting their use in body illuminators from the shuttered type.

Svetlina halogen source with GU10 base

LED

Mozhe bi nay - the most crossbreeding type, the golyama has added popularity to the past few years. LED lamps are compact, have a long service life (up to 50,000 hours) and are 8 five times more economical than halogen lamps. Those are not insured against vibration and work in a wide temperature range - from -40 to +40 degrees Celsius. Those can and imat all of them bloom for radiance - from bright scarlet to icy blue. The very special dimmable devices work with dimmies.Lack of LED sources for lighting, turn on the light, the price is still high.

LED spotlight with base GU10

Hello! For the sake of low energy consumption, LED lights with a GU10 base are often used in independent designs, which use batteries or batteries as a power source.

Luminescent

These types of crocks, the names of energy-saving, are themselves from LED in terms of efficiency, but a lot in the same way from the latter. MTBF e average 10,000 hours. Considering the relative size of a crucifer, miniaturize the searchlights and use them in a row. The very special dimmable lamps work together with dimers, some of which are packaged for packaging.

Energy-friendly (fluorescent) mug with GU10 base

Metalene halide

The power of the source was taken by the light from the fire, discharged on the bet's bait. Contrary to this name, halogen crumpets from a hot pot have nothing to do with the tov. Metal halide sources for light-lining are compact, they give a lot of bright lightening, but the synthetic material is a special ballast for the heavy work. Since the basis of GU10 those are quite rare, they belong to such lighting devices with a special purpose. In dimmed mode, metal halide lights do not work.

Metal halide lamp with GU10 base back kjm sdzharzhanieto ↑

Where can I use the telat from the GU10 connector?

This type of size and marketability on the basis of GU10 is small, those are mainly mounted on compact covers with a low power, using spot lighting and background lighting. Base areas per application on the light line with tosi type base include:

1. Clarification or illumination on showcases, shandows, tables.
2. Illumination on facades on fences, elements on landscape design.
3. Illumination objects for photography and filming (mainly metal halogen and halogen floodlights).
4. Home projectors, wicked lighting.

Searchlights in the tavan

Whenever you choose a lighting lamp, shake and pay attention not only to the size of the head and the appearance of the connector, but also to the principle of operation. In this case, however, the problem is still solved and the illuminators can also serve for a long time and effectively.

PreviousSokliCharacteristics on the basis of E40 and where it is usedNextSoclesCharacteristics on basic and linear lamps on R7s