Selection and installation for lighting behind the cabinet in the kitchen

Title: Backlight

Additional lighting in the kitchen is a must, especially work on surfaces - a raft, a mivka - they all need it. Lighting behind the kitchen under the cupboard is equipped with various lamps and lamps, but the LED lights provide maximum convenience. Tozi is an economical source for a light osiguryava spectrum, known for a chorat, and simplicity for equipping with lighting can be worn out.

Containment: 1. Role on backlight 2. Lightening Options 3. Selection for LED illuminators 4. Important points for comfortable lighting on the work area 5. Direct yourself LED mounting tape 6. Rules for safety on installation time 7. Work with backlight 8. exit

Role on backlight

It is not an easy task to prepare, but in the process, a knife and other devices are used, something inattentively executed with consequences. The task for lighting in the kitchen is not in itself a decoration and outlined in separate areas, but also organized for high-quality lighting, something else to direct the work at home is safe.

Important! With such a monotonous work, sometimes tryabva and this is twisted into the kitchen, look at it and kill it and like tryabva and gi strain it and from lips to light, togava morata vznikva much more.

Kitchen tryabva yes ima perhaps a lot of sources for light with a mek spectrum, which in case they throw it on a dark area where it is reduced to a minimum, which means something more convenient for work. Do not take away for a decorative effect, created from lightening - it is underlined on separate furniture, functional areas. Dori has a very compact kitchen, clean-cut and cozy with light in the closet.With her, it’s not possible for them to help the flock, and they will present furniture and decoration in a favorable light.

Backlight option Combined clarification behind the kitchen work area

Zonata under the wall closet is considered to be convenient, for protection:

Svetlinata is not blind at home.
All the elements and devices are clearly visible, to protect the syankata from takava lightlin not falling on the raft on the masata.
Convenience for an eye on tezi, coito sa friendade in the kitchen. Taking it apart, it’s a piece of equipment equipped for a special country, sometimes blocking the five on the light on the lighting rod in the distance, the surface is broken off at the top.

Important! You can put the clarification on Wednesday or close to the appearance of the rib on the cabinet, then the gava zasenchvane is still minimal.

back kjm sdzharzhanieto ↑

Lightening Options

Razglazhdayki Option for clarification, but it is necessary to pay more attention to two aspects: the view on the use of the lamp and the option for clarification, which task is to illuminate the working surfaces.

Tryabva and sleep with a lamp. Traditionally, you can use one of the following options:

Lampi... Te sa nay-evtinite, but the brightness for lightening is not for them at all. In addition, opt for clarification, which is more to look at down the valley, it's just not the intended purpose for using such covers. Another problem is nai-visokata consumption for the energy of the environment, there are species sources for light. Ako use the lamp itself from the lit litter to the kitchen and light up the zones of the zone, togava sweep for electricity, it will be huge.
Halogen... It's often used to illuminate the work area, especially with floodlights. The lack of a halogen lamp is necessary from a carefully worn and heavily soiled.For yes, skip the last problems, try and choose models, which are imat reflectors. But trynosta on a takiva from the source is a golyama from a tazi on a lamp with a hot chick.
Pestene for energy, they say they are luminescent. For illumination of the working area in the kitchen, it is used by both compact and linear models. Osvent's last option is often used in special lamps from the existing type. Those sa are more comfortable and give a bright light. The characteristic is necessary from the correct Izkhvarlyane.
LED... Maybe bi nai-dobriyat option for the day in relation to efficiency, ease of work, the spectrum is eliminated. Vyarno e, che tsenata they are nai-dangling, but it is not justified from the long exploitation of the stomach. Specifically, positive aspects of LED lighting will still be discussed more clearly.

Backlight Spot lighting with halogen lamps

Now try and see the opportunity for lighting the work area, cash on Wednesday:

natural light... Understanding this, golem the vision of kindness, but without the meaning of sharply bright light gives a day, tosi the source still hasn’t crawled out of the evening. Additional lighting is necessary.
General light... Tova sa polylei, applici and other Uredi, who will put it on a tavana or stenite. Regardless of the technique and the size of the kitchen, it is extremely problematic to light up the working area with a light. The problem is, read and wall the body lights and place them in the center or remove the target position on the light body without acquiring the desired light for the work area. Tozi, cook some, in all cases more light-colored with a grub, that is, they also hvarli syanka on top of the raft on the masat.
Spot lighting... It’s possible to find it conveniently, for sure, illuminating exactly onesi areas, for example, se namira lampata.Such models are accessible and low cost energy consumption. A friend plus e, what the design didn’t hang on them, for some reason it’s not necessary, and they will put the wardrobe up high, which is foreseen for the project.
Petna - a subtype of searchlights. Tyakhnata is different, why are they twisting and not seeking a place for a citizen in a closet on the closet. Osvent tova those can yes be mounted on a wall or on a closet at will.
Lightly shine. Montirat se kam wall or kam dnoto on the wall closet. It is convenient to use it, the lightness is uniform and uniform, but the design does not fit into the exterior view of any kitchen. Made from plastic.
LED light lines… It is realized in various forms: lamps, tapes, special lamps with diodes, soldered devices.

Preferences on LED

This LED is still considered to be the preferred use for lighting, it is recommended that the light source be used as a source of light, and all will report average:

Whenever the tape is installed in the excluded state, it is practically not visible. Whatever it is to lampite, they make them look stylish and modern, so they won’t ruin the outside view of the kitchen.
The price for the diode tape is small and connected to a transformer, it can also work from 220 V.
Minimum consumption for energy, regardless of the light on the source for light, crawling behind the backlight. You can dori and light up the kitchen from it, and the consumption of energy will still be a little bit, broken off from one lamp from the lit litter.
Lentite give a wide range of radiation.
Long operational belly on LED - from 10 khiladi hours.
Vednaga give a bright light - it’s not necessary to be dirty.
They do not suffer from temperature change, which is not unusual for the kitchen.
Effective lighting in the evening, but efficiency is important lighting on kitchen surfaces.
Possibility of integrating LED lighting into any interior style solution.
Lesen for the izkhvarlyane - maybe yes, they izkhvarli in bitovite otpadtsi.
It’s not difficult to change the ribbon, as you are a failure.

LED backlight Possibility for undercutting on LED lighting back kjm sdzharzhanieto ↑

Selection for LED illuminators

For backlighting, various LED devices are used; tryabva yes se imat foresight nay - popular.

LED stripe is a universal source for lighting, which can be forested and positioned for any field on a kitchen unit. Giving a uniform blyask, without senki and otblyastsi. For yes, illuminate the work area for this, for some reason you need it, for some reason you can, yes, I fix it under the closet, which I simply close up with a double-sided tape.

The peculiarity on the tape e, four sa gvkavi, which means something, let them repeat all sorts of things on the wall, closet and tov without affecting the top quality on clarification. It is for the illumination on the work surface that a monochromatic single-color tape was used. Tryabva and be extraordinarily attentive with the color kato blue, green, red - they distort the external view of the yastiyat.

Lampi with ice lampi for working surface:

Outwardly finished.
Vzemane.
Otgore.
Lifelessly stored with batteries.

For lighting, you can use any version on the device, but it’s correct to put the game on a huge role - so yes, there’s an additional syanka top work zone.

Above ground the models of the slats behind the installed, thy kato se montirat with the help of self-tapping screws and fasteners of the elements, which are foreseen in the design, directly in the middle of the wall cabinet.Techniyat exploitative stomach, spored nai-conservative estimates, e 15 years old. Takiva lamps will not separate the toplin in time for work, the lightness of them is uniform and does not kill the eyes.

Dot Surface Mounted Spotlight Top Cabinet

Grade models sa for hard work for sglobyavane. Ako se planira is such a lighting for the work area, then it is necessary for this to be a damage to the kitchen set with a double bottom. Illumination was pulled by a tremble so that it was so encased that it was even a single field from the bottom to the cabinet. The theses of the model are bright, the light is saturated. Those are linear, furniture, sensory. The last one is more convenient with the tov, what can and can be turned on with a single dosing, that is, it is not necessary to turn it off to the switch.

back kjm sdzharzhanieto ↑

Important points for comfortable lighting on the work area

It is even clearer that LED lighting is more convenient for the kitchen and, in particular, for the work area. But tryabva and se imate foresee the following points:

Clarification on the kitchen cabinet from a look of goodness in a white spectrum. Without distorting the appearance of the food and cook food, as much as possible, as close to natural as possible.
For yes, you will create comfort in the kitchen, shake and use ribbons or LED lamps with a top spectrum.
For yes, illuminate the work area, trebva and planirate is not one, but 2-3 sources per light. It’s possible to give a tov e and all to a minimum appear on a stern senki.
Clarification is a breeze and a response to the style of the interior, harmoniously and in harmony with the design. Such a thing, for a classic, the light was neutral and nai-good, coldly it was wonderful for all style.

back kjm sdzharzhanieto ↑

Direct yourself LED mounting tape

Installed on LED tape, you can do all the tricks on the fire, lighting up the task is not very difficult, but try and get all the necessary tools and materials for yourself, somehow and yes, you know, some of the characteristics for working with the lighting element. Ask an expert and you will help with the rules and regulations of the installation:

Try to buy a set of lightening or buy the elements separately in a specialized shop for lightening. Osvent tova nay-eutinite models are not an option;
Particular attention is paid to tryabva and all objects on isolation on the contact, especially in the vicinity of Mivkat, close to Pechkat.
On the ribbon ima markings for polarity; Before you remember the installation, please think about some contact.
It is not necessary to use a soldering iron for fixing on the contact on the tape, cable and transformer; Tova e is a convenient and safe option - conektori.
For tape mounting, aluminum profiles are often used. Thus, the element of the source of the light is not hitting the eyes on the sednalite on the masata in the kitchen. At the time of the day at home, they received a lot of light in time for the process of cooking. Ako ima the space between the wall and the wall closet, togawa the profile can be placed in it and the ribbon can be stuck there. In Tozi, the case of highlighting the scene of the day is still there, and in the evening, it can be difficult and oshiguri high-quality lighting on the raft.
The motion sensor can be used for lighting on the tape. It was also allowed to let him in for lightening, without using the key. And ty kato domakinyat constantly move in time for the process of cooking, bright yama and go out.

How much is needed for installation

If you want to install LED tape in your kitchen cabinet, you need the following tools and materials:

LED strip with required length and type. First of all, remember something, tryabva, yes, che tapeta, tryabva is even waterproof. You will recognize forest food by rafting at the store - diode sa cover with transparent silicone. Tryabva let you pay attention to the broya on the element for 1 m tape, sharply more than Ima, sensible brighter lightening came out.
Protected. It is also dissuaded for converting it on a 220 volt interchange into the need for the operation of a tape from 12 V. When choosing a tosi element for backlighting, try carefully and choose a manufacturer and power. Trinostta on illumination depends on these two factors. Block tryabva yes bde projected exactly for the debt for the purchased tape and se iziskva yes ima reserve for power.
Cable with a straight section of 0.5 mm.
Knives and thixo.
Poyanik and colophon.
Ako lazy tryabva yes bdat svyarzani, togava konektorite sa in need of a break.
Ako backlight is directed from the RGB tape, togawa control.
Ako lentata nyama is a sculpted base, togawa is appropriately sculpted, nai-simple solution is a double-sided tape. Tova e is one from nai - hope and evtini velcro.

Installation

Procedure for installing on the steps:

Measure the necessary length on the ribbon, I will cut it off. Comrade tryabva and become spored etiketite, koito sa trace of every group of diodes. Tova is marked with scissors. Ako behold it is cut off on a sinful place, the cyalata tape has become inescapable.
At the edges on the tape, remove the contact and solder the cable wires to the tyahs. For yes, direct the tov, shake and skip the silicone protection from 1–1.5 cm. It is important not to reverse the polarity. For cables, you are identified by color; lentata ima, answer the designations "+" or "-".
The trace of the ribbon is attached to the bottom of the cabinet. Tova e forest and send it to you, like a tapetata e self-zalepvascha. Akone, the togawa double-stranded ribbon is now full of stones, but the surface, somewhere else is attached, now it is clean from dust and now it is degreased. Tazi technicians let us keep it healthy for many years.
It is also possible to fix the transformer under the bottom or, for example, punching a hole in the wall or bottom on the cabinet, and then put it in the winding set.
Now, tape the contacts and tryabva and get drunk, go to the transformer. There are many models of imat terminals, with tyah vrazkata e nai-lesna.
The last step is to attach the cables with the connectors to the transformer unit. The work on the tazi stupka is not completed. Ako everything is directed correctly, the ribbon is more work.

Important! It is not allowed to connect to the tape without a transformer.

pandelka Put on a diode tape under the cabinet back kjm sdzharzhanieto ↑

Rules for safety on installation time

Rules for safety when installing LED strips are standard and apply to all electrical work. Specially:

Overshoot the mechanical voltage at the top of the semiconductor elements.
Installed it is treabva and all is perverted by itself when the protection is turned off.
Spase the polarity on the link to the elements and on the verigata.
Supply electrical insulation in time for installation on metal tape.
Ako nyamate skills and work with electrical uredi, in a better way, yes, believe me, work for a specialist.

back kjm sdzharzhanieto ↑

Work with backlight

For yes, maybe a tape, and spend it, it’s possible to find a long, tryabva and follow, forgive the rules for her work. Between tyah:

Systematically cleaned from mrsotiya, dust.In the process of crawling into the kitchen, they still appear honorably and quickly, tova treabva and watch.
The temperature in the air in the kitchen is not shaking and hovering above +40 ⁰С.
Lentata is not shaking and now it’s dripping water, regardless of the degree of defense on the neinat.
The tension is not shaking and nadvisava tova, something is put on tape.

Vvvsichki left aspects and yama features on the grill. With proper installation, such lighting will continue for a long time.

back kjm sdzharzhanieto ↑

exit

Clarification on the kitchen cabinet e nay - good option for putting on additional lighting. Since the decision of the house has been made, there is no problem and the difficulties with lighting the work area have been overcome. The solution for using LED backlighting is still right.

Maybe you are interested in Phytolampi What kind of clarification for seedlings, yes you choose Backlight Illumination selection per toilet ss sensor per movement Backlight How da guide the tavan from drywall with backlight Backlight How do you manage lighting in the field with LED tape