Rules for choosing lighting for the kitchen and neinata installation

Title: Backlight

Well organized lighting is one of the main parts for effective design for any type of room. Svetlinata is of particular importance in the kitchen, thanks for the correct distribution for clarification, this is convenient and high-quality cooking. Vsichko, something is necessary for szdavane for clarification, e select on the main sources for lighting and clarification for the kitchen.

containment: 1. Selection for the locality and methods for installing on the backlight 2. Lightening Options 3. How can we direct LED lighting in the kitchen? 4. Rules for safety

Selection for the locality and methods for installing on the backlight

Kitchen clarification has been used for solving the following tasks:

Distribution on a niche and a cabinet with a combined option for clarification.
Underlined on decorative interior elements s svetlina: raft, paintings.
Illumination in the kitchen area.
Lek accent värkhu glass raft and stained glass windows.
Montiraneto on the lighting body under the wardrobe osiguryava visual effect on the "floating furniture".
Multi-stage tavano lighting.
Illuminated on the bar broyach with LED lamps.
Mounting above the closet, like a kitchen ima high tavani. Svetlinata, wet on the mountain, visually increase the flock.
LED stripe presenting the good and under the raft. Pobira is predetermined to fill in the checkmate, for yes, underline it to them.
Illumination on a transparent or translucent raft through the LED strip installed on the contour.
Glowing skin - decorative panel with photo printing. Examine the lightness of the self-mounting under the glass, give the effect to the wicked radiance.

Ima have a lot of options for kitchen lighting.Choosing the right solution depends on the owner's desire, strong imagination and financial possibilities.

Backlight Skin glazing with LED lighting back kjm sdzharzhanieto ↑

Lightening Options

Popular options for light fixtures for kitchen lighting:

Searchlights and spotov.
Lightly shine.
LED tape.

Searchlights and spotlights

Arranged for additional lighting from a point or spotlight is an option, but not the best. Illuminated from the point of origin to the light of the sky, it was delivered to them at the top of the furniture - at the top of the cupboard furnace, for some reason, high-quality clarification on the work area was not achieved. Ako lower the lamp under the nivoto on the wardrobe, it would be inconvenient for the house to cook and cook. And if you pump the petnate on the tavan, it’s still useless for them, it’s more like blocking the light from the light, move the syanka to the top of the work area.

Spot lighting in the kitchen

Nai-conveniently install a petna under the closet - comrade osiguri brightly illuminated on the raft on the masata. Used on a spot and have your own shortcomings:

High product price.
Ako focus on the light line sa close to clear, the lightness is dazzling, and through the regulation on the stream on the light stream of the light on the desirable zone of the semen.

Svetlinni lachi

Lighten the beams of the illuminator of the body, which are used by the fluorescent tubes of the lamp - they can be golem or compact. Some devices are intended for indoor installation, others are for external installation.

Gradite osiguryavat bright light and sal lesni for the installer. The appearance of the flock is not attractive to them, and it can ruin the whole impression of the flock.

Fluorescent lamps and mat have another drawback - the high price. The average price for a single compact 30 cm lamp is 10 dollars.For yes, osigure the necessary clarification, more and more from 5 lamps.

The advantage is to lighten the lights for installation and the possibility of switching on each lighting body separately. Stop lighting bodies from linking between and into one system.

LED light strip Svetlinni lachi - a convenient option for clarification

LED lighting for the kitchen

Nay-dobriyat option for szdavane on izkustvena svetlina in the kitchen e Nanasyan on LED strip... Ima is a redeemer of predominance before another illuminator of the body:

Size miniatures. Compact ribbons and diodes are invisible against the background on kitchen furniture, they will not ruin the interior and design on the cabinet and raft, but on the contrary, they improve it when turned on.
Small in size, LED tape osiguryava brightly illuminated on the raft, the working area and the mound in the kitchen. According to Tozi, he began to settle down and accept the conditions for the kitchen process.
Low price and efficiency in relation to electricity consumption.
Wide range of species and colors.
Safety and performance for use on tape under all conditions of temperature and humidity.
Trinost for work.

The only thing, for some reason, it is important that you pay attention, do not choose to protect the LED.

Tryabva yes, even for gvkavostta on LED tape, they can and can be installed at all times:

Use the standard technique to place tape under the hearth of the cabinet.
Yes, resort to an unusual option - yes, outline the glass of the gate and the front of the door.

For the organization of extraneous clarification, it is made of a special aluminum profile, which is best for mounting on tape and mounting under glass.Izlchvanata from the diode light of light se na som vreshnostta on the glassy surface, cracking this and that, giving the impression that something has turned into a lamp.

Backlight with diode LED lighting in the working area in the kitchen back kjm sdzharzhanieto ↑

How can we direct LED lighting in the kitchen?

Think for one principle on the installation DIY LED strip, regardless of the location chosen for the installation. Ask where, yes, pump it up, all the same deciding for yourself. The sequence on the installer is the following steps:

Protected. First of all, choose a place for storzvane on zahranvaneto, make sure that it is available in case of need for repair or change. It’s convenient to save the LED tape from the conductor of the kitchen absorber - you can save it even before it, so don’t see it.
Fastened with LED tape. The execution of this on the stage is elementary. LED tape ima sculpted substrate from one country. It is necessary to skip the protective layer and stick the tape on the chosen place. The only thing, something that needs attention, is tacked on tape. Ima special belezi on him - turn on the whites of the ivitsi, according to which you will cut the ripples.
Twisted on vsychki illuminating elements. It is important here and not sebarkate with polarity. LED backlight is stored with constant current. Answer the “-” and “+” signs at the top of the tapeta sa juice. In zakhranvaneto chervaniyat conductor e plus.

Tova completed the process on the installer.

Choice of LEDs for kitchen lighting

Whenever you choose a diode tape, tryabva and be careful, yes, I expect from water. Another important condition for safety in the process for clarification is:

Minimum protection level in wet environments IP44. Uredat nyama and loshy lice, as soon as little drops of water fall on him.
Reliable protection - IP65. Lampat yama and losh dory under the flowing water.

Acceptable voltage for LED tape is 12 volts.

Illuminated trebva and osiguryava bright radiance, whose spectrum is close to dim light. Preferable tape with LEDs, consisting of three crystals, SMD type - 30 diodes per meter. If you are looking for a bright lightening, give preference to products with a length of 60 per meter.

Election on zahranvany

For yes, you can add LED lighting and work without interruption, choose a backup with a power reserve of up to 25 percent. The power output of the LED strip depends on its type and technical characteristics. Can you explain the parameters from the manufacturer or consultant. For example, if a single meter tape is 30 diodes, then the consumer segment is 7.2 watts. Ako se use a 4 meter tape, the total cost is 28.8 watts. Suitably secured with 25% margin tryabva yes ima 36 vata.

Experience this and choose compactly stored, so it’s forestry and hide in time for the installation.

When selecting the switcher, these options are:

Sensory.
Standard with buds.
Infracherveno - including light from the mahvane to the rakat.
Dimmer - controller of the intensity of lightness. The control can be sensory or mechanical - with the help of a rotary switch.
Block, some kind of light-colored cara and shine in different colors or in a moment. Takiva efekti seldom used for the kitchen.

Kitchen clarification from diodes, which comes from a little bit of laziness, all of which is a twisted parallel circuit in the connection.

Elementite Necessary components on the LED multi-color backlight

Characteristics for installation

Assemble the LED backlight, then follow the instructions:

Do not cut off the spontaneously necessary length on the ribbon - it is right for you to determine the place, when you put the marking.
Ako use some laziness for clarification, twist the gi stubbornly to save it.
Twist the conductor, moving away from the block, segment it onto the tape through soldering - the goods e find - hopeful beginnings.
Osigurete is soundly connected to the conductor.
Attach the LED lighting to the under cabinet or other furniture with molding tape. First, fasten the ribbon in some places, check the distance and correctly position it and then press it sensibly along the length.

If you have enough experience and knowledge in working with electrical equipment, please ask for help from specialists.

back kjm sdzharzhanieto ↑

Rules for safety

The process of installing on the LED strip is simple. It is allowed to eat and everything perverted from the unpreparedness of the choir, but the very same thing will take the definitions of the preparatory measure:

In the first place, then buy an LED strip, save yourself for safety - do not state the product for mechanical soldering.
Carry out the pisti deserve special attention - if you find them, damage the tape, becoming defective.
Be careful, sometimes work with electricity.
Once you connect the LED, you will be sure that you conduct the fastening and tying correctly, it is important that all the polarity on the contact is correct. If the tape is not connected correctly, damage the device.
Osigurete on the source on the light line is stably stored with current, avoid sudden jumps on tension. Tova e is especially important, when you use a little lazy at the same time. Manufacturers are interfering in parallel.

Safety when using LED tape is guaranteed, but it is connected to a block with a suitable power.Do not take away and save a reserve for capacity from 15 to 25 percent.

If you assume the diode tape is on top of the metal surface, you will burn it behind the insulating layer. There is a risk of direct contact with metal, such as with a device that is supplied with static current.

Do not take away and prevent tape from excessive moisture and other aggressive factors. It is prejudicial to eat and use the case sealed behind the light source.

Previous IlluminationHow can we choose camp lighting or can we direct it ourselves Next Illumination