How to choose and configure the lamp for the motion sensor

Title: Sensory for movement

It’s not a secret that the development of technology is not standing still. The concept of “smart”, which in translation means “smart”, has long been included in the sayings of ezik in khorat. We are talking about a progressive trend in the field of lighting devices, then you can follow a certain chain: from the appearance of a flask from a hot flask to a fluorescent takiva, after this, the appearance of LED and LED lamps.

Containment: 1. Girth per application 2. Principle for action 3. Installation 4. How do we choose 5. Advantages and disadvantages

The high price of a lampite, working with diode elements, is justified from the cost and practicality. And so it is used by the sensory for movement and lightness, then no one from the technical predecessor (icons and shells) can be compared. Thy kato key is not vinagi sa conveniently located in a cottage, apartment or other flock. And for yes, turn it on, for some reason the tremble and twist the distance in the dark is determined. On the contrary, there is no need for physical effort, but for the most part, it is brighter, including and excluding itself.

But do not blame and not at all possible or prejudicially yes, all installations are separate from polyleys, lamps or just lamps. In the extreme estimate, it is much more convenient, but at the same time compactly and economically, the device is equipped with different equipment. At some point in time, everything, for some reason, leave it and direct the trace of it to such an element from the packaging, if you curl it into an ordinary cartridge, and yes, enjoy the prestige of modern civilization.All the same, you can do it without a lot of preparation and own your own right, dory domakinya. This is for the sake of further information is given for goods like a lamp with a sensor for movement, in which cases it’s good for me to use, somehow, the principle of working on a device.

Girth per application

Base the areas on the application on the road with sensors for the movement of this place, sometimes try and visit in a row and for a short time. Those include corridors, pillars, entrances to large buildings, a veranda and an area in close proximity to a private house. There is such a thing in the development of European country-like devices that are used in electric fences for street lighting. In this case, it is common to use a sensor for light sensor for movement, which somehow allows for lampat and work itself with a light.

Possibility for mounting on lamp ss motion sensor

But horata zapochnaha and use widely LED lamps with sensor for movement for a house or apartment. For the sake of the tyahnat, maybe even autonomous work, behold the phrase “smart house” appears. They are used not only as a lightening, but also as a decorative effect.

According to the view of the light-emitting diode, the light-emitting diodes and DD are divided into 4 types:

• Byalo (cold) - installed on street lampi.
• It was not neutral - I crawled into all the premises and offices in the industry.
• Zhjlto (fuel) - replace the flasks with a hot zhichka in private brownies and apartments.
• It is multi-colored - from the crawl of se kato decorative light.

Somehow you can see, LED crashes, if you have a lifeless sensor for movement, they can crawl into any area. Therefore, there are various modifications. Basata can be used E 27 or E 14, E 40. Working voltage varies from 12 to 220 volts.

back kjm sdzharzhanieto ↑

Principle for action

Work on energy-dense lamps with DD is based on constant monitoring of a defined area (depending on the location on the installation) with the help of infrared lamps. And just like in this field, there is movement on a person or animal with a natural body temperature, an indicator of a reaction and making a signal for switching on. This is a positive temperature source for infrared energy. If the time is known in the working area of ​​the sensor, there is no movement, and the light is now turned off.

Power depends on the armor on the LED

The power of the electric plug depends on the choice of the LEDs installed and technical specifications. Those work at low voltage. But the diffuser is curtailed, which acts as a protective cover, osiguryava optimally distribution to the light stream. The metal finned body acts as a cato cooling radiator. That help and all, remove the toplinat in time, in spite of the fact that, in a row, this is not a seisqua. And the driver (protected) will change the input voltage to low, avoid pre-voltage, as a result, the elimination of the effect from treptene will start.

back kjm sdzharzhanieto ↑

Installation

Whenever you install energy-saving LED lamps with motion sensors, it is also important to foresee where and how the installation should be done. A lot of experts preporchvat yes gi dunk on a tavan or taka, like a lampata and stare at the bottom, as far as possible. T'y kato tova increased the work area of ​​the detector. But if there is a takawa opportunity or a tremble, keep a clear zone under your eye, then you can, sort it out, but I will upload it to a vertical surface. Osventova is almost a model with a design for both wall and tavan.

But ima factori, koito tryabva and all take foresight when installed on a DD lamp.For example, if you install it in a house or an apartment, then it is undesirable that you put air conditioners, heaters on fans, heating pipes or in places, where you can get air from the heating system. Sometimes you install the body lighting with a sensor in a garage or under a shed, or else a parking stake, if you choose such a place, then the detectors will not be used when fueling the engine on the car.

Ako see the option from the grid for street lighting, togawa tilt the maximum possible position on the darvetata or keep it in the windmill and se oshiguri in the zone on the sensor for the movement. And preferably in the work area there are no electrical breaks in general.

Regardless of the power, trebva and follow the rules for putting on such a lamp.

Operations can and can be occupied from close to birds and highways, electric wires or mobile phones and cell houses coolies. Ty kato comrade brought to false positive results on the device. And togava svetlinata often turn it on or work constantly. But the original idea was to use lamps, lamps, searchlights with DD, and yes, turn them on and off for a while for energy efficiency. Contrary to what you know, new models on such equipment and control over the final setting. And some include functions for excluding pets before a certain teglo or respond to horata itself. But all the experts will tell you all the combined detectors, for yes they will reduce to a minimum false alarms.

In addition, the sensory is charged for the movement and the degree of defense is determined. For the installation of all the necessary lamps with IP 40, and for the installation of all necessary lamps with IP 50.

personalized

For yes, you will set the optimal parameters for working on an electric switch with a sensor for movement, shaking and sorting out under what conditions the shaking and reaction. Many imat models and light sensor. Therefore, there are three levels of the regulator for a long time, with the help of some perverse settings:

• Nivo on sensitivity. It is common to see this soil as SENS.
• Refinement. TIME.
• Nivo for illumination. Designation - LUX.

Vednaga trebva and all are whiter, depending on the price category, the accuracy on the settings is different. Tova means, che skpyte models and a good range for sensitivity from eutinitis.

However, with the setting for the time for the blackout on the blackout or a little clear, then the indicator for the illumination is not set to the minimum, so that the work itself is the night or the night. Nivoto on sensitivity is regulated according to the desire of the owner. For the final setting, you can send a few samples of the rotation, and sort it out under some conditions for a sensor response and under some conditions. But, as a rule, for the first time, the parameters are set to the maximum position. Tova rule in the forest and see the sharply good reaction of the detector.

Tuning all the wrong way directly up the lampata back kjm sdzharzhanieto ↑

How do we choose

For yes, choose the right LED lamp with a sensor for movement, it is not funny and schematically and show where these devices are located. In this case, it will become clear that a device with a wide visual angle (360 degrees) is necessary and sharp with cramped. For example, for Cemetery lighting you can install DD with a range from infrared light.

So, don’t take it, check the models, you may not give a better result.In an extreme estimate, those, as a rule, use little by little high-quality elements. Osvent tova garantsionniyat term e-dalg for knuckles from the temple price.

Power… Tosi factor is still playing an important role. Ti kato for temporary lighting close to the port or at the entrance to the house or apartment si struva and install a 10 W lamp or dori in a small way. Ty kato is heated brightly, the radiance is still more intense. But if you try to light up the area (flock, garage), then try to turn your attention to the area on the flock, so you can figure out how much power is needed, and take the lamp with DD.

If pets fall into flight on the action on the sensor, then try to choose models, in case of which the detector does not react to pets until the teglo category is determined.

Depending on the area for installation, it is necessary to first determine what type of lightening is necessary - white, neutral, warm or decorative.

Naturally, tryabva and pay attention to the basis of the krushkata, because they differ in different polyleys and lamps.

back kjm sdzharzhanieto ↑

Advantages and disadvantages

For yes, you can analyze it for good measure and buy and install an LED lamp with a sensor for movement, try it and pretegly plus and minus.

This is a positive aspect to use on takiva lampi:

• High energy savings for the sake of niskata electricity consumption.
• Resistant to padan for tension.
• Kogato e is included, yama lope on natovarvaneto in mrejata.
• Long period for exploitation, somehow justifying the high price.
• Ecologically clean, do not eat harmful substances.
• Lips on vnshen noise at work time.
• Golyam range for the minimum and maximum allowable voltage on the electrical network (180-240 V).
• The temple is a light stream from the bottom of the consumption for energy.
• Lesen for connection and tuning.

The only drawback is the high price. But plus you yourself underscore the fact that there is only one good product, no matter how evtin.

PredishnaSensors for movementCorrect setting for the sensor for movement for specific tasksNextMotion sensor How does the motion sensor night lamp work and how is it useful?