Scheme for the connection to the sensor for the movement of the LED spotlight

Title: Sensory for movement

Illumination in the area in the vicinity of the kashchat is an important aspect from landscaping. It’s convenient if you don’t feel like it, but you’ll fit into the key in the dark, but you can see everything, for some reason this is a case of light on fener. It is used for street lighting, it is considered as a single measure for hanging on a sigurnost - put on hardly a search and crawl into the yard, illuminated by a searchlight.

containment: 1. Principle for action 2. Options per spotlight per sensor per motion 3. Schemes on the wire 4. Regulirane on the sensor 5. Similar to the video 6. exit

It is convenient in this relation to convict the illuminators of the body with the sensors for the presence. Before you turn on the sensor for the movement of the LED spotlight, you know, try the main characteristics on the basis of the process and function on such a lighting equipment.

Principle for action

The function of the sensor for the movement for turning on the lightening is when a person appears in the area. Lightening is all except for a short period of time. Ako install the system correctly, the consumption of electricity for lighting on the territory is 70%.

Searchlight LED spotlight

The schematic on the connection depends on the type of sensor used, specifically:

infracherven… Sensor of curve and response to change in fuel (IR) cut in zonate for coverage. Once the object is moving, every separate bream is focusing above it, as if it is a signal for the need to turn on the spotlight. Sensitivity to the device depends on the bream on the bream, which is sharp - more sharply, more sensitively.There is a lack of medium for goods: falsely involved and painted accuracy, can not work at any temperature. As far as positive qualities are concerned, this is the ability to regulate the girth accurately, without giving any distortion.
Ultrasonic... "Research" on the zonate for the action of this case, for the sake of sound and sound, which is not at all like a chorat. So, install a line in the first place on the reflection on the wall, turn on the searchlight. The main effect that we can apply to the sensory theses is the Doppler effect. Such is the device and the disadvantage, among which: the effect is negative on the top of the pets, the girth on the exposure is small. Whether it is used when cutting movement or adding movement to a small object - it all depends on the setting. If it is configured incorrectly, there is a risk of an attacker and a failure of the sensor. As far as positive aspects are concerned, they are accessible, can and function at any temperature, the movement is determined regardless of the obstacle, which is the object.
Microwave oven... Tazi version on the sensor of the high-frequency electromagnetic wave, reflecting it from the object, they will change it, for some reason it will be fixed from the receiver. The principle for work is similar to the predishnat version. Disadvantages of this model: high price, possible false and positive results. It’s crumpled, what a microwave is dangerous for a chorat. What is it about predominance, among them: the possibility of opening the back of the walls, gates, and glass on the object. The performance does not change depending on the temperature, and it is compact in size.
Combine Models… Those se izpolzvat chiefly in case of alarms for hacking. Those are some of the technologies that are the most difficult. In a short time, it is possible that all shortages will be overcome and all advantages will be increased.It’s best to combine with an infra-red and a microwave stove - in this case, it’s possible and even to comprehend exactly on the moving object, and from there it’s used on the spotlight.

Important! Posochenite sensors work with LED spotlights, halogen lamps or lamps with a hot plate.

spotlight with diode Option for LED spotlight back kjm sdzharzhanieto ↑

Options per spotlight per sensor per motion

LED floodlights with sensors for movement are classified according to various criteria. The difference between dust resistance and moisture resistance is important. There are a lot of negative factors on the streets, which do not affect the quality of the device.

Nay-dobriyat option for the field for protection e IP65. Tova means that the sensor is completely protected from penetrating into dust, water does not get into it, regardless of the stream on the stream. You may have some trouble for using the sensor with protection IP44, but the goods are not enough for the street. Meaning protection against penetration on objects over 1 mm and protection from kapka or prysky, which fly under the head. Tova is not enough for trouble-free work on the mechanism.

Samiyat sensor for movement can be set like this:

In the case of an LED spotlight - such a block can be more compact, ty kato sa with a small size.
One piece from the spotlight, but in the body, separated from the light elements.
Searchlight and detector for the presence of a separate element. Lastly, installation is allowed, regardless of the lighting device.

When you close the device, shake it and turn your attention to the head and the girth to cover. In some time, compare with the area on the installer and the size on the area, sometimes it will be covered in time for the operation of the sensor.

Specifications Kogato cupuvate, think for the range back kjm sdzharzhanieto ↑

Schemes on the wire

The system depends on the rules of this insertion. spotlight and motion sensor Job. The most important guideline is the guide for the consumer, it describes in detail how you can connect a 220 volt network.

If there are separate elements for the spotlight and sensor, they can be set independently from each other. This solution is considered to be optimal and the sensor will try if it is oriented to the locality, it will appear some more. In this case, it is necessary, yes, in all cases, to foresee the visibility and the zone of the reaction. As far as the spotlight is concerned, it can also be placed on the ground, conveniently for lighting, for yes, it is absolutely necessary to cover the area with light.

The standard scheme on the link is shown in the picture:

Scheme Standard wiring diagram

For yes, you will swipe the sensor for the movement of the spotlight, shaking and opening the capacitance on the device, which will give you access to the terminal for the connection to the conductor. Before you start and work with the cable, try and measure the phases of the cable, for the goods you will get a tester. That tryabva and bjde is connected to the terminal on the sensor for the conductor. Nulata is connected to the spotlight and the sensor. Leave yourself and svrzhete stay the conductor to the free terminal.

Hello! It’s better to leave the switch in the verigata - comrade, it’s better to help control the lightening. You tryabva and be tied in parallel. For more help, if necessary, leave the svetlinat on the street for a longer period, which is foreseen from the tuning on the sensor.

It is also possible that it will carry a little sensor to a single projector, and in the name of a little approach to a lighted area, which cannot and does not cover from a zonate to coverage to a single device.In this case, the sensor is connected in parallel, the projector is even lighter than the other one from the link to the large sensor of all engagements. Linking it somehow to the snapshot along the valley:

Scheme The circuit is connected to two sensors per movement

If the device is embedded in the spotlight, then there is no need to connect the sensor for the movement of the spotlight separately. The schematic is not all that different from the standard one: for every lighting source DD does not need a separate insert.

Important rules:

Tsyalat work on the connection of all this is out of whack with the machine turned off on the scoreboard, cable not tryabva and save it.
In terms of time for the process, the trebbling and all use an indicator screwdriver for checking for tension.
It is important that you don’t switch the current to the vrazkat: the phase of the trip and the cable is connected to the phase of the cable, zero - from zero.
After that, turn on the work, pull it off the electric grid and check the performance for the system; There is such a tremble and configuring the sensor for movement.

Video instruction

back kjm sdzharzhanieto ↑

Regulirane on the sensor

In time sensors for movement from different types, you can and adjust: sensitivity, lightness, time for shading and glare for editing. With the right settings, it is still possible and all using energy in a cost-effective way. Vsichki settings can and be perverted on the raka.

Searchlight Key for regulation on LED spotlights

Important! Not all sensors and imat shorten the parameters for tuning, some imat the time itself on the amba and sensitivity or the time on the amba and nivo on the light.

Ygl for installation

The first rule is not correctly regulated on the zonate on the curve, for the goods the ripple and the regulation of the angle on the installation. Detect sa hinge, for yes you will help and set the rules ugl.Sensor trubva yes, if placed in such a position, for yes, increase the maximum zonata by coverage. In Tozi, the case is very important, not the glult itself, but also the height, on which the sensor is set. Most of the time, the problems of gardening are given in the instructions - they depend on the model for the device and the parameter for the vertical view. It is important to e and sokata on movement and in what kind of plain. Tova izbyagva dead points and false alarms.

In any case, such a setting is available for any type of motion sensor, which is loaded heavily on the spotlight.

Sensitivity

Tosi parametar se narich "sens" with different models. For setting the ima, changing the resistor from the minimum value to the maximum value. Tazi correction is considered difficult. The essence of the food is to exclude the reaction to the sensor of small animals, but in some time, such a couple and a few people.

It is especially difficult to regulate the property's parameters for the owner's information, which should be in the yard. Most likely, the sensory reaction to it is better, because it is so small in size and the sensory still "sees" the catoobject, for which it is necessary to react.

Illuminating

On the top of the sensor tosi regulator e is marked as “lux”, also called “day-night” - characterize the symbol on the device. It is necessary to set it up, for yes, turn on the bright night. Ako do not direct the basin setting, it is more difficult to turn it on at night. In a good way, yes, set yourself up, kogato navn se stmni. Tryabva and save yourself from the maximum value, but check when you work harder and yes, make the parameters as necessary. It is also possible to set the right time for the ground on the fixed sensor for the movement on the object.

Regulators at the top of the floodlights

Refinement

It is based on the case of "time".Tosi parameter showing how long the spotlight shines from the moment it is switched off to the sensor itself, that is, from the moment when the zone is moved to cover until it is switched off to light. For yes, not a moment, in a good way, yes, do not ask the minimum value of stamina. Adjustment of the varia from 5 seconds to 10 minutes. Which option do you choose tryabva yes determine the basis for your own needs.