How can you choose and turn off the switch for lightness ss sensor for movement
Title: Sensory for movement 
Choweshkiyat belly becoming all simple thanks to the appearance of modern technical devices, but from which it turned out to be lighter with motion sensor (DD)... This device is capable of responding to the movement of a person from a flock, including light. For example, when you try to hang out, you won’t start and reach the pre-switch, but it’s like that, then the sensor for the movement can also handle it on your own with turning it on to lightening.
Containment: 1. Principle for action 2. Varieties of sensors per movement 3. Schemes on the wire 4. Setting up for vrzkata 5. Choice per device
For yes, light a lamp, the device is shaking and recording the presence of something and movement for a person for a certain distance. Ako yama movement, sensory disable light trail pre-determined time. It is used on such a device to save money on energy and convenience for consumers.
Principle for action
The switch for the light length is connected to the sensor for changing its electronic device, which is automatically turned on and off on the device’s illuminator, which will take into account the definition of the condition. That includes clarification, but it detects some movement in flight on the sensitivity of the detector. At some time DD, radiation is not emitted - by studying and fixing the range in a certain range.
How motion sensor works
Take it in and analyze it for any distortion in the infrared, microwave, or ultrasonic range.Therefore, it is possible to choose a device that somehow performs specific consumer tasks and even answers to the conditions of the working environment. For yes, they will improve the accuracy, the manufacturers will put many types of detectors into a single sensor, somehow drawing the probability of fake alarms.
According to the mechanism on the curve, there is a gap in the zonate, observed from the sensor, the device for dividing into active and passive. Activate the last start function. Those izluchvat vlnovi signals and diagnostics technite reflections. Ako distance is covered from the signal from the sensor to the closest barrier and back, change it, then use it again. And devices from passive type sa are capable of catching toplinate itself, isolated from cowshkoto tyalo. Views and combinations of sensors, which include passive and active device properties.
Activate sensors work with radio waves or ultrasonic waves. The range of the ultrasonic range of the response to the frequency is from 24 KHz, the ear does not perceive the sound, but the pets: cats and a bunch more react to it, some more show in tyahnoto restless behavior. Ako in kashta ima pets, togawa not all allow ultrasonic sensors.
Varieties of sensors per movement
The sensors used for lightening differ depending on the location on the installation and the type of signaling device. Ima vnshni devices and vtreshni, which is closed.
External sensors work on the principle of measuring at a distance to an object. Those sa destination and control is a zone from the yard. Takiva devices are convenient for golems, rural houses and vili with an extensive location and warehouse.Many devices operate over a wide range from cost meters to half a kilometer. There are both professional and professional sensors, intended for the golems of the area. Specialize the devices you have installed and choose the type of spotlight.
Working on an external motion sensor
Throw in or home urede sa destination for throw out installation. Those se are different from the models of the product, which do not incur cutting temperature changes.
Home sensors are divided into the following categories:
- Ultrasonic models work on the principle of reflecting on ultrasonic beams from round objects. Tozi type is considered to be nai-izdrzhliviyat, simple and evtin.
- Infrared devices work through the analysis of fuel and infrared treatment. The sensor contains two pyroelectrically sensitive elements. Vseki from tyah analyzer toplinnata radiation. Ako nyama movement on toplinny objects in the space that, izlchvaneto, vlizascho in two parts of the element, and yet, so the sensor does not work. Once the object, removing the toplin, move it, that is in flight for the action on a single element, therefore, signal from the receiver’s two receivers to distinguish and sensor, concluding what the movement is, and including the light. Fluctuations in temperature in the surrounding environment affect the operation of such a device, so it does not interfere with the installation in the kitchen or close to the entrance gate. For yes, prevent turning on the bright light, when pets are in the zone for action, and it is necessary to set the correct range for the working temperature.
- Microwave models of functioning cato radars. Such a sensory can also distort objects, the location of the back dielectric or weakly conductive barriers, for example, back glass, walls, gates.Functionality per device is independent of the temperature indicators. The device is sensitive to movement. The disadvantage of the tasi option is the high price and the increased consumption of energy, which is important when working on a battery.
IR sensor e nay - convenience in daily life back kjm sdzharzhanieto ↑
Schemes on the wire
For yes, remove the sensor, try and follow the instructions, provide it with the device. It’s better to put the device in its place, somewhere signal the devices to protect against external teasers. For installation on a device, find a suitable locality. The distance from the hearth is permissible from 2 to 6 meters.
It has not been installed on devices in the vicinity of air conditioners, fans, heaters, radiators, tall flocks of plants, under these conditions, creating movement to the air, some other reception from the device, which is a signal for turning on the lightening. There is no tolerance for the presence of an obstacle on the glass in the zonate for working on the device, so that infrachervenite the light reflects it from the glass. In the flight to action, there is no need to shake things up and let them pick up objects, which they will stop at a glance.
The process on the connection is perverted, somehow as follows:
- Exclude flocks from zahranvaneto. For yes, send Comrade, tryabva, and eliminate the need for chips on a glucometer. If you don't direct it, you'll get a current blow. Strictly not wired to a device that is defectively wired, there is a risk of damage or spontaneous igniting.
- On the sensor, there is a protective cap on the sill on the watch hand and I will fall.
- As you can see, open the assembly and adjust the screw.
- Choose a scheme for connection.Ako direct the installation yourself, without any experience in asking questions, it is better to use the standard scheme shown in the instructions or on the device itself. The Tazi scheme is not simple, you can use it without problems and the process on the installation does not take much time.
- If you have experience with electricity, you can use other schemes, but it’s all the better and trust the process to a professional.
Girth per sensor
The trace of the manipulation is left alone and set the sensor to the required parameters.
If you need light and shine constantly in a flock for a certain period of time, regardless of the presence of something in the chorus in it and nothing in the light, use the scheme on the connection with the switch. The switch for the switch is connected in parallel with a single key to the switch. Thanks to Tozi, the method for installing the stav is possible and all lighting up the flock is sensible for a long time, it is necessary. And sometimes the switch is turned off, sensory more dissuading for the management of the light.
Video instruction
Setting up for vrzkata
New models of infrared detectors will provide the user with the ability to adjust parameters for illuminance, instrument sensitivity, operating time and installation time.
All functions, when configured correctly, will measure energy savings. Tryabva both and now whiten, not every device is ima vsichki tezi regulatori. Old models all regulate themselves from one or two parameters: sensitivity and time, or from degree to luminosity and duration to fun.
When adjusting the head for installation, for the first place, it is necessary for all the corrige of the zonate to cover the DD. In the new location detector devices separately on the panty.Tova satisi, which is a tryabva and be in such a mood, that it is infra-red and twisted, and the volume of space is twisted. Here is an important place for fixing and hanging, on which the detector is located.
Time setting
The TIME indicator shows the duration for darkening and then for brightening. Tozi parameter e nay - forgive from a glancing point on the complexity of the settings. The range can be from 5 seconds to 10 minutes. Tuk consumers decide on their own for some time for fun, more conveniently for him. With any model of the sensory, it is time for fun to be able to do it with any subsequent inclusion. Once again, set up the device for the first time, set the time for the minimum cost, such as any other parameters, and yes, pay for the check.
The setting is described in detail in the instructions.
Degree on illuminance
The following is an adjustable luminosity degree, which is marked with the inscription "LUX". Iziskva se sensort and including svetlinata itself is dark. Sometimes you set the sensor for the first time, all the time you set the maximum value for LUX, and sometimes you set the appropriate conditions for using the sensor.
Sensitivity setting
Adjustable for sensitivity (with "SENS" inscription) It is often possible to set the ideal parameter for the first time. Contrary to Comrade, in the future you can still achieve acceptable results. For yes, they will get exact results, smoked for resistance to SENS, tryabva and see literally from a millimeter. The main rule is that if DD does not react to the external view of a person, increase the sensitivity level, so turn on the light from the ni-malkite external movement, just a little.
You may have to pre-set the sensitivity when changing for the season. Correctly configure DD for all actions, sometimes a person appears and does not react to other movements, for example, sometimes a small pet is a pet.
Predimstvata se osiguryavat from sensors, equipment with a microprocessor. With this device, when the choir is in the zone for coverage, the sensitivity is minimal. The SENS indicator of the curve on the sensor. Kolkoto is tall and stoic, sensible in terms of goals and radius on the curve. Tosi parameters are adjustable individually.
Choice per device
Sensors for movement can be bipolar or tripolar. The preferred option is to work exclusively with a lamp from the pressed lamp and foresee a consistent scheme for connecting to the source to the light. The second type e is universal and can be used with all kinds of lamps: LEDs, fluorescent lights, etc.
Dnes ima a lot of golyam choice from the sensory for the movement
The choice for DD depends on:
- The radius of action, which determines the distance to work on the device: from 2 to 15 meters.
- Ъgl for indication on objects in a horizontal plain. Tazi characteristic depends on the model on the device and varies from 60 to 360 degrees.
- Silat on the goods, some tryabva and bjde svarzan kjm device. If the total power on the lamp is overdue, the allowable norm is for DD, if you try to install a relay between them or divide the product into two independent sensors.
- It is sized for flocks and has a specific purpose. For example, behind golems, trade areas, halls, long corridors, warehouses and facilities, it’s good to choose an LED device with a sensor for movement and a microphone.
In relation to the parameter to store it on the device, there are no special studies - there is a need from the standard AC network.Samite sensory consume up to 1 W energy.
Sveti on kupuvachite
- Cable uredi and synthetic materials are seriously considered when determining the appropriate location for installation. Don’t worry and wear the devices honestly, not on your own, but it’s better to know the location.
- It is imperative that you use a circuit diagram with a separated pre-switch. In this case, both the sensor and the switch work independently from each other, but in some situations it is not convenient and you can use the usual beginnings for switching on clarification.
- Kogato kupuvate DD, tryabva yes pitate the consultant as a range of e-good and choose for a certain flock.
- When installing it, it is important that you choose a place, so the sensor is not set out in a way that is bright from other body illuminators and turn off the lights. On the other hand, the device is not good and the functionary is correct and soon it will fail.
PreviousSensors for movementHow to direct the sensor for movementNextSensors for movement