How do you direct it, how do you light the sensor for movement, do not work

Title: Sensory for movement

It is unreasonable and irrational to leave it in the light along the street or closed at night. For yes, the lights shine as much as necessary, to protect the chains on the illumination of the body and mount the sensor for movement. So, within a radius of mu, a moving object appeared on the action, the detector’s km sent a signal and clarification included this.

Containment: 1. Characteristics for work 2. Typical damage and how yes gi remove

Once the object disappeared from the zonate on the sensor, the lightness was gone. Tozi mechanism for the action of se turned out to be different during clarification:

streets;
help room;
warehouse;
corridors;
fly cemeteries;
entrance;
mazet, etc.

Sensory for changes, they crawl to places, sometimes the choir appears periodically. The devices help to save energy and provide convenience when used for lightening.

Contrary to tov, like other devices, sensory for movement they will damage it, fail, work incorrectly. This may be due to a malfunction in the device or incorrect insertion and configuration. Ako sensory do not work, tryabva and open the cause and let me remove it.

Sensor Defective motion sensor still cause a lot of problems

Characteristics for work

An electrical sensor records the movements of the choir and other objects in the si zone for action. Once a person gets into the radius of the activity on the device, that starter of the sensor system on the detector, which has given information received on the mechanism to which it is connected.

Principles for working on different types of sensors:

Ultrasound - function according to the method on the reflection on the ultrasonic spectrum from the object. Somehow the moving network came into the working zone on the detector, the frequency on the reflection was waved from the object of this exchange, this is the recording from the receiver. Sending a signal for turning on the light;
infrachervena The sensors work through the analysis of fuel infra-red radiation. The device has two sensitive receivers - pyroelectric elements. And dvete analizirat infrachervenoto lachenie. Ako in the zonata to cover the nyama, movement to the object, removing the toplin, signal to the elements of the safety of the ednakvi. Therefore, the sensor is not all inclusive. And once the object is alive, move it, hit the zonata for action on one from the element, signal, and two from the receiver, it’s different. Therefore, the sensor detects the presence of something in the movement and lightness of everything. Infrared devices will see fluctuations around the temperature. In the basin, it is forbidden to install everything in the kitchen or close to the entrance gate. For yes, prevent turning on the light from moving on small animals within the radius of the sensor, and it is necessary to correctly set the range for the operating temperature;
Microwave oven Devices with high-frequency 5.8 GHz electromagnetic wave. Check when reflecting from the object, se registering from the sensor and sometimes there will be small differences in the reflected signals, the microprocessor on the sensor will be activated and including brightening. The device is sensitive to movement. But this name has its drawbacks: the high consumption of energy, which is important, and this is foreseen when working on a device from a battery battery, as well as a high price.

Infrared motion sensor back kjm sdzharzhanieto ↑

Typical damage and how yes gi fix

Sensory for work on clarification, then watch for faults on the object:

Lips on the switch.
Lips on a timely izklyuchvane.
Turning on and off becoming spontaneously.

Ako sensory for movement for light do not work, first check if it is connected correctly. At this stage, you will determine if some device was hidden and working, under whatever circumstances it happened. Cause, damage some device, it can damage it:

Imashe jump on the current.
Tokt in the district e preksnat.
Accidental blow from a foreign object.
Chu se unpleasant worldism.
The device was laid out for rain or flooded from the sitting area.
The previous arrangement is not faulty, it works correctly, and so on.

Trace kato teach the reason for the damage, then you will sort it out in what way and continue. Check if the device is connected correctly, if you see if the device is connected to the necessary storage and given the name of the indicators, it was turned on.

Vrazki Parvata stupka yes, check the diagram on the link

Another important moment is, if the sensor is often denied, but if you parameterize it, the work is too configurable or not configurable at all. The consumer may even have made a mistake when installing it on the regulator. Trace corigirane on the faulty device, then work correctly. For yes, direct the friend, put all the controls in such a position, turn on the probabilities in a slightly brighter way. Set hi-high sensitivity and hi-quick time to work. Under these conditions, the analyzer works on the sensor and the ability to react muda to movement.

The sensor does not work due to incorrect settings

If your device does not turn off the brightness or does not function correctly, please think about the settings.On the housings on the device, you can also see three controls, labeled with SENS, TIME and LUX.

The SENS indicator of the sensor sensitivity monitor for the change.
The TIME parameter determines the time on the fun before the exception to the light.
The LUX indicator determines the degree of illumination, at some time the light of the lamp. Ako the inten- sity to be around lightly e to the temple from the assignment of stoicity, the lightness of the yama and turn it on, dokato not darker than navn or closed until the assignment of prags.

To set correctly all the burn parameters, you also prepare the sensor for work when the condition is determined. From the very beginning, those tryabva and be installed by an electrical engineer, who installed the sensor, or from the consumer himself.

Next step Yes, check the settings for the desired parameters and for activation.

Whenever you work with professional equipment, save your parameters. Theses for the cost of sa task for a dimer:

In the work area (offices, workers, offices) pragt e 600 lux.
In the aisle of the zone - 75-200 lux.
Under the conditions for working with the voltage on the screen is increased - 1000 lux.
The average range at illumination is from 2 to 2000 lux.

It’s difficult to determine the correct parameters, but it’s better not to change the parameters yourself. Initially, set the nai-niskata value. Radiate the tova sensor, turn on the bright light with minimal clarification.

And if you set the maximum power - 2000 lux, then shine brightly all the time. In this case, from a visible point to the correctness, the device still works correctly - somehow show the settings. But in practice, the work is much more useless for the consumer. If you open any faults, you will get yourself a specialist, someone will figure out how to set up the settings.

Malfunctions in the work of the sensor for movement can be pre-warned and from incorrectly set sensitivity values. If the parameter is set incorrectly, it is possible that the sensitivity of the device has been changed in the zone and it is ready for action. For example, when there is little movement, the device may not be turned on.

Often the setting is incorrect on the stability and on the illumination, time and sensitivity lead to the fact that the light does not disappear, the trail disappears on the movement in the area of the sensor. Ako svetlinata not turn off hard for a long time without moving objects, it is necessary to check for a while for fun on the turn off. The reason for the product may even be overpriced by the TIME parameter, some rights cannot be set on the source contacts that control the lighting devices. The TIME parameter has its own average value:

5 minutes for pedestrians and corridors;
15 minutes for office space.

Tuning on sensorite spored instructions

Wrong place for mounting

For each view sensor, foreseeing the definition of rules for installation and selection for location. Ako, they are not spazvat from the installatorite, but the device is still working and working incorrectly.

Acknowledge for incorrect installation on the detector for movement as follows:

The installation height is incorrect - the device is under 2 meters.
The sensory head is not properly saturated. Izskva of this set, yes, it is soaked in a posokat, which is still more controlled.
The device is in a strong current.
In proximity to infracherveniya sensor and device, removing fuel.
The view on the detector is not obstructed by slopes on a drift, eyes on flocks, a canopy on a curve or other obstacles.

If the sensor is not responding to anything or if the object itself is alive, it is possible that it is close, carefully check if the device is installed correctly, if you take it foresee, describe the research.

Follow the parameters from the golyamo value:

Distance per action.
You can see vertically and horizontally.

When installing on the device, position it at the required height and focus in such a way that the parameters are as short as possible for the existing conditions on the teren. Have a foresight to work on the sensor and your own boundaries.

Put on the sensor Correct location on the motion sensor

False inclusions

Alien objects and objects imat direct and indirect influence of the upper work on the sensor.

Golem move all the toplinni pototsi, for example, from convectors, fan convectors, and have a direct effect on the top of the device. Enormous cabinets, shelves and glass barriers limit the radius for working on the detector and call it dead zones in the room.

Heat the devices and have an indirect effect on the top working on the device. Breathe in sweat, which they move, lead to malfunction, some punishment of the sensor for the movement and its involvement arbitrarily. Yes, limit the sensor from external influences and prevent false alarms, if necessary, apply sensitivity to the device, or use masks for bream, delivering from the sensor.

Microwave your sensors virtually invulnerable to external influences. Those functions regardless of toplinate on the surrounding environment and sound vibrations. Such devices can both be able to crawl on their own into the seclusion of space. Those sa are unsuitable for street lighting, tho they will be activated from any movement, for example, sometimes the leaves fall from the darvo, sometimes they tend to selyuleat.

High-quality sensors should not be used in areas where there are barriers, such as public toilets. In this case, the automation of switching on and off on the svetlinat se osiguryava at the same time from some sensor.

False switching on the sensor can be prevented from a technical malfunction on the device. Such a breakdown is still determined by those skilled in the art. Technical faults often lead to false positives. Mostly, the reason for this phenomenon is the poor quality of insertion and squeezing, the installation on the device is incorrect. And of course, the reason is lying on the surface and everything is in the wrong setting.

Do not take away that the intensity of the light is measured from the surface. According to Tosi, the device began to take readings for the degree of illumination on the ground, it was wet. For example, cogato zonate on the effect is saturated with kam tmen gal or mesto s with weak light and measuring the amount of light in the tazy region. In Tozi, the case of a light-colored yama and light is more correct, but it’s on the other hand, it’s dark, it’s split off on the territory.

Sensory is not excluded from light

Cause, for the sake of some sensory not excluding clarification, then follow. Vinagi ima movement to closed or open within the framework of the working girth of the device. Therefore, the sensor works for a long time. Once the time is reached, the system is turned off, some new within the radius and the device is then giving a signal to turn on. Such a light shine constantly.

Probably cause se kriyat in the device settings then:

The time for soaking is not correct - it is set high.
Pragt on brightness is raised.

For yes remove the problem, check all the parameters and direct the necessary corrections.

In rare cases, the cause and not all of the exception is the artificial clarification from the sensor secrecy in the nuance to work on a negligible electronic circuit. This is the case, when the device was under voltage for a long time. As a result, the goods contact may not be excluded due to the appearance of the remaining goods. The problem is to solve it, for a short time turn off the device from storage and then turn it on again after 15-20 seconds.

Svetlinata is not all inclusive, sometimes the sensory work

Damage to the sensor is often caused by incorrect adjustment to the illumination and sensitivity to the sensor or from the lipsat to the device.

First check your settings. There are many problems with incorrect settings for lightening. Set the optimal cost per field from 200 to 300 Lux. The degree of illumination in any device is not regulated - it is a factory cost, but manufacturers can do it all. In the basin, the situation will go to the store, someone bought a sensor, change it in advance.

Also, along with the settings, check whether the sensor is installed correctly, and other factors that are affected are given the name. For example, if any lighting device or other light source is close to the detector, you can still reliably determine the degree of illumination in the zone for action and still work at exactly the same time.

Checking for storage

Introduced into the sensor for changes and the electronic circuit for switching on the light. For yes, back up and work, it’s necessary, yes, all osiguri vrazkata mu with a safe voltage. The standard sensor is intended for direct connection to a 220 volt bit electrical network. Tova is not considered as a sensory for radio waves, which is protected from battery.Scheme for svyarvane wines of property on the hulls.

Next, you will save the device, it is necessary and check the power supply to the circuit and the initial relays are working. This is a product connected to a relay, it can be a lamp with a lit button or an LED lamp.

Once you repair the sensor, turn it on with the help of a pre-switch with a low current - 1–2 A. Another possibility is to use a difavtomat, turn it on for that, and then presume from affecting the current.

When submitting a sensor to the storage, check for the presence of voltage at the top of any working element. For Celta, use the device - multitester. After that, check the distribution system and store it, pay attention to the work on the output relay. Negotiate contacts and carry out typing on foreign goods for a long time, some may cause wear and tear on the contact group or the development of a new exploitation stomach.

The correct functioning of the relay depends on the working condition of the transistor, which controls the work. This is how you can check the work on the transistor with the help of a tester.

For yes, take the risk from the shock currents, exclude the protection of the pre-switch and, with a short time voltage for work, gain access to the cable connections to the sensor and the lighting rod. Trace of those tryabva yes be mechanically fixed, for yes all of a sudden prevent the zatvaryan. Apply pressure now.

Electricity use an indicator screwdriver for these work and check the phase on the terminal. Ako go nyama, ima clarity in cause for damage. Leave it alone and premahne. But the check is not necessary. It is necessary to set the zero potential before reaching the sensor.

The potential may disappear due to damage or wear on the conductor, as well as damage to the aluminum conductor. Use a voltmeter to check for zero and phase potential. Ako the device is showing normal stamina, but it is not necessary and oppressive. If the situation is reversed, consider here and consider the reason for failure. Call for integrity on the conductor, then measure the resistance on the part from the verigata.

The correctness of the sensor has been checked with a voltmeter. For yes, send the tov, svrzhete sondit kjm, zero the glue and phase out of the outgoing conductor to the lighting device. When the contact is closed, the device will still show the wrong voltage.

Sensor your equipment with LEDs to show you the status of the device. If the device is connected to a stored and operational state, the blink LED is an average of 1 pin per second. Somehow the detector of all the involvements, increasing the frequency on the treptene, somehow correcting it is possible, without yes, all the connection of the goods, but all the analysis gave the sensor of all the involvements. Tryabva and remember that any type of device can be prepared for work by itself for 20-30 seconds and the trace is switched on for storage.

Predishna Sensor for movementScheme for connection to the sensor for movement Next Motion sensor How to choose and install a projector