Connect to DRL lamps for 125, 250, 400 watts and technical specifications

Title: Specialization

DRL lamp is an electrical device belonging to the group of lighting devices, which is used for artificial lighting. These devices work on the principle of discharging gases in a live bet by placing them in a closed flask. Check out the lighting from Tosi type se classified cato gas discharge lamps from bet gum.

containment: 1. DRL - what's up 2. Design 3. Principle for action 4. Typical device 5. Specifications for DRL and Negative analosi 6. Girth per application 7. Vrazka 8. Advantages and disadvantages

DRL - what's up

The view of the source on the light of the wine is laid down in the name, which somehow allows the specialist in the tasi region to determine the technical characteristics and the principle of action.

View of lampata DRL-250

And so, the abbreviation DRL means the following:

• «d”- zapalvane on the source on the light, becoming under the influence of an electric arc, which is somehow out of control, then put it on contact with the device. Stability is not enough for the work of all osiguryava through the use of a throttle, which limits the cost of working current within the boundaries;
• «R"- a lampata from crawling a zhivak, soar on some device to work;
• «L”- work for the source on the lightline of se oshiguryava through the conversion to ultraviolet lightline in the visibility spectrum on the beam with the help of phosphorus, some oshiguryava of the process for luminescence.

For your information! Luminescence is the process of luminescence, which is caused by the action of external energy on top of any material, which is in a state of light and in a cold state. The process of the spiral, turn off the energy on the excited.

In the marking on the source for the light, in addition to the kam, the abbreviation was taught in a mountainous way, the vinaga ima is a digital designation. For example, the designation "DRL-125" showing the power per lamp is equal to 125 watts.

Main structural elements of gas discharge lamp back kjm sdzharzhanieto ↑

Design

Similar to other types of gas discharge lamps, the light source from the DRL series consists of three main structural elements:

• glass flask from heat-resistant glass;
• the base is an element, equipped with a threaded connection, which fixes the lamp in the dzharchacha on the lamp and the contact on the current-carrying part of the part on the lamp from the wiring of the electrical connection;
• burner, directed under the format on the pipe. Made from quartz glass, three in it, the location of the main and additional electrodes, such as a limiting resistor.

From the kolbat to the device, there is an air evacuation and a nitrogen pump, and a layer of phosphorene is applied on the top of the surface.

Vvtreshnoto space on the burner, somehow representing a discharge tube, is from the pump inert gas (argon), and putting it under the format on captcha or molded, it is deposited at the top of the wall and (or) the electrode. Depending on the electric power, the lamp from the tazi ce series will produce with base E27 and E40, which determines the possibility for using it with a lamp.

Working chain for switching on DRL lampata back kjm sdzharzhanieto ↑

Principle for action

The trace is turned on to the source on the bright line in the electrical network, the voltage is attached to the part on the lamp under voltage, the location is in the base. Through an electric circuit, applying voltage to the electrode, mounting it in the burner, as a result, at some point between the lines, a sparkling discharge appears. Tova se must lie on the formation of additional free electrons and yoni on the surface of them.

Thy kato electronite and yoni se natrupvat, vtreshnoto space on the gas discharge tube is heating up and zhivakt soil and all of it is steaming. Tova osiguryava of the regime for a discharge between the electrodes, switching from a luminous state to a state of dha.

With an increase in the amount of money wagered, the brightness increased by the amount.

Under normal working conditions, the time for reaching the light source before declaring the technical indicators is 4.0-5.0 minutes.

Kolkoto in a high temperature for a round environment, it is sensible a little more time on a lamp from a tosi type, and the task is reached at the maximum radiation for light.

Modifications to DRL and DRV are not visually different back kjm sdzharzhanieto ↑

Typical device

Industrial production of living lamps from the DRL series in several modifications, differing in technical characteristics and working conditions:

1. DRL - a standard modification, sometimes a rare deficiency, from which a negative one, follow: a high degree of heating in terms of time for use, sensitivity to voltage in the electric gap, a long period from time to time reached for the optimal mode for operation.
2. DRV (DRVED) - Dzhova zhivochna tungsten and erythema tungsten lamp.Technique distinguishing devils sa: starter without crawling on the throttle and raising the indicators beyond the light line.
3. DRLF - the model was adjusted for a standard lamp with a high pitch, with a slightly rough surface on the cover with a reflective material, slightly adjusting the technical characteristics in comparison with the original modification.

The possibility of using them in a certain lamp depends on the size on the lamp. back kjm sdzharzhanieto ↑

Specifications for DRL and Negative analosi

The main technical characteristic for a light source - low power - is reflected in the marking on the DRL lamp. Stop the indicators, which will determine the working conditions, try and read additionally. For yes, send Comrade, tryabva, and study the friendly documents.

Other indicators include the following specifications:

• light flow - the need for a light source is determined for the light flow for setting up the necessary lightening per unit area depending on the product;
• exploitation stomach - determining the guarantee period for work on a specific model;
• the standard size is on the basis - by setting the parameter on the illuminating body, with which it is possible and all the lamp is defined from the use;
• size - this will determine the possibility of using a lamp with one or another lamp.

The main technical characteristics of the lamp from the DRL series are shown in the following table:

Modelelectrical energy,

W

light stream,

Lm

Stomach,

hours

Dimension,

mm

(length × diameter)

Basic typeDRL-5050190010000130 × 56E27DRL-8080360012000166 × 71E27DRL-125125630012000178 × 76E27DRL-2502501300012000228 × 91E40DRL-4004002400 015000292 × 122E40DRL-7007004000018000357 × 152E40DRL-100010005500010000411 × 157E40DRV-16016025003000178 × 76E27DRV-25025046003000 228 × 91E40DRV-500500122503000292 × 122E40DRV-750750220003000372 × 152E40Street lighting device from ZhKU12 series, working with DRL lamps back kjm sdzharzhanieto ↑

Girth per application

DRL lamps are widely used as a source for artificial lighting in street lighting, as well as in lighting systems in the fence and construction industry.

Follow the modifications to the gas discharge lamp sa high-riseni when installed for clarification for various objects:

• models DRL lamps - toll fees on highways and streets, squares and squares, production workshops in the enterprise's industry and technical facilities (gasoline stations, parking lots, warehouses, etc.);
• DRV Lighting Models - Remove objects kato with DRL model, they are used and used for lighting at agricultural enterprises, which can be seen greenery in isolated soil (greenhouses, greenhouses, etc.).

Awarded for lamps from the DRV series for lighting in the greenhouse back kjm sdzharzhanieto ↑

Vrazka

Lamp from the type DRV connected directly to the electric grid, which is the same as the lamp from the pressed lamp.

For yes, turn on the lamp of the DRL type, and it is necessary to give the ballast (ballast) - a choke, which is regulated on a cost of working current at a cost of value. It is necessary to turn off the food and turn it off on the illuminating body, somehow and yes to set up the regime for it.

The diagram behind the connection to the DRL lamp is shown in the next figure:

DRL lamp in section and diagram on the included with the help of the throttle

Throttle, using a gas discharge lamp from Tosi type, it is produced in two versions: independently and enclosed pre-switched. Depend on the design on the lighting body and the location of the ballast in it.

Inspection for an independent switch-on choke with a power of 150 W

The main technical characteristics, which are the criteria for choosing a model for a control device for compliance with the conditions for use with a particular gas discharge lamp:

• electrical energy;
• working current;
• winding temperature during normal operation;
• possible preheating on the winder;
• the maximum allowable loss in power over time for use;
• Power factor.

A malfunction in the control device is the main reason for the failure of the lamp, equipment with gas discharge lamps to work for a long time. In the basin, the question is how to check the throttle for the DRL and it is relevant for many owners of such a lighting device.

It was used on a multiset e nay - the correct decision was made when checking for work on throttles.

Nay-lesniyat start for checking yes, use the multiset and yes, check the integrity on the winding, such as the presence of something on the inter-turn connection.

You can use the lips on the measuring tool Svetlina power, similar to the power of the choke, and I will turn on the verigata in series to save it on the control device.

When the throttle is working properly, the lamp from the pressed switch is still lighter by half the pressed switch or even a blink. The lip-sat on the shine shows that the winding on the device is damaged, the presence of it is brightly shiny - and so the connection to the winding is.

Used on gas-discharge lamps in lightening, then on the workshop in the industry of the enterprise, you allow and pray to go around for a raincoat on estimates for the use of electrical energy back kjm sdzharzhanieto ↑

Advantages and disadvantages

Popularity on the DRL is due to the technite of predominance, the main one is from koito sa:

1. Long exploitation belly.
2. Compact size.
3. High speed on a light stream.

Osventova, instead of a lamp with a lit litter, can use models from the DRV series, which, according to Tosi, starts painting all over the place to protect the treasury. And the presence of a tungsten niche helped to stabilize the voltage on the light source.

The main faults on the DRL lamp are the following indicators:

1. Sensitivity kam hit the current.
2. From the source to the light, you can turn it on again, just cool it down.
3. Pulsation on the light stream.

Modify to DRV, in addition to burn shortcomings, lower efficiency and operational life from a similar model from the DRL series.

LED analogue for street lighting type DRL

For the sake of the fact, over the last few years, more and more consumers are using electricity for electricity, and I’m slow, gas-discharge lamps will be replaced with technical LED analosi.

Lighting devices, which use LEDs and cato light sources, use cato street lamps, as well as for extraneous lighting, room decoration and landscape design.

PredishnaSpecialized Types of DNaT lamps and their technical characteristicsNextSpecializedChoice for clarification for manicure and UV lamp for drying out for varnish for nails