Specifications on 5730 Power LEDs and application

Title: LEDs

LED from the smd 5730 series is one from the best source for light in its own category. This product must be the optimal combination from the main technical characteristics: size, light flow and electric power.

Containment: 1. Dimensions and parameters 2. Half to Wat 3. Somebody is crawling 4. 5730 LED strip

Dimensions and parameters

SMD 5730 e-bright LED, which somehow explains the popularity of other LED sources in the light.

The main technical characteristics of the SMD led 5730 are shown in the following table:

№

p.p.

Technical specificationsmeasured unitStability measured1Light streamLm45-50/110+2Electric energyW0.5/13Operating temperatureС– 40 – + 654Storage temperatureС– 55 – + 1005Storage temperatureС3006Rated currentmA1507Operating voltageV3.1–3.38Geometric dimensions (L×W)mm5.7×3.09L on 12010 Light transmission index Ra60-8011 Color temperature YES CE3000-7500

For your information! The temperature on the bright light e is given in the whole range of white light type radiance: hot (3000–4000K), neutral (4300–4800K), pure white (5000–5800K) and icy (6000–7500K).

Dimension smd 5730 back kjm sdzharzhanieto ↑

Half to Wat

Soon, on the market for lighting products, new modifications appeared on the LED from the questioned series.

Distinguish them from the standard kato models sativa features high power output and increased light output.

Important! Model with a power of 1.0 W ca marking kato 5730-1 and ca equipment with two crystals. Svetlinniyat flow in such a device can be 158 lumens.

Izpolzvam smd 5730 Used on smd 5730 in production on car lamps back kjm sdzharzhanieto ↑

Somebody is crawling

Due to the technical characteristics, which achieve high brightness at low electrical power, SMD led 5730 is widely used in the production of various lighting devices, namely:

sources for lighting (lampi), for artificial lighting in rooms for various purposes;
Automobile lamps for various types of use (external lighting, light indication, backlight);
External illuminators of the body;
LED strips used for artificial lighting, lighting and decoration both indoors and outdoors.

Bulb with E27 base, with smd 5730 LED spotlight, model "11000LM" with motion sensor 5730 LED strip used for artificial lighting and lighting when decorating rooms back kjm sdzharzhanieto ↑

5730 LED strip

Thank you for the bright radiance, present on SMD 5730, LED tape, in the direction of lightness, it has been successfully used as a cathode-based source for artificial lighting in various types of premises (administrative, public, housing).

The power on the smd 5730 LED strip depends on the color of the LED, set to one meter from the product. Tova se izrazyava in stonostite, the testimony in the following table:

LED typeElectrical power per single SMD,

Throw LEDs per meter from the product,

neshcha

Total electrical power per meter LED pandelki,

SMD 5730-050,5157,530156030SMD 5730-11,0151530306060

They cast on the LED, put the LED tape on one meter, it is shown on the label.

As a general rule, LED strips are realized in the measured length, which is 5 meters.

Specifications on 5730 Power LEDs and application Vision view of the ribbon with segments and a line beyond Ryazan

Depending on the type of coverage, LED strips are offered in different degrees of protection (IP code), which is regulated by GOST 14254-2015 (IEC 60529: 2013) "Degrees of protection against obstacles (IP code)".

Product from the highest degree to IP65 protection - IP68 can be used in humid and damp rooms, as well as directly in water for lighting on aquariums and pools.

There are two types of operating voltage for the source of artificial lighting: 12 and 24 volts DC. For control over tyahnata work, all use a special device for regulating the silat on the light stream - dimer.

tape at work LED strip at work

Due to the relatively high power output, the SMD 5730 series generates a significant amount of fuel over time. Please install it on such a product and try it out with the help of an aluminum profile, somehow allowing you to spread it on toplinat and start it and put your stomach on the LED.

Modules with various shapes and sizes are produced on the basis of LED tape from the SMD 5730 series, which is used in the production of lamps with various sizes and configurations.

LED tape from the SMD 5730 series sa individual style in interior design for houses and quality indicators for artificial lighting.

Previous LEDs from Smd 5630 series - specifications and usage Next LED Characteristics on SMD 2835 LED vs. Main Differences