Characteristics and design based on - E27
Title: skirting boards 
The basis of E27 is considered to be very common in domakinskit and industrial body lighting. Another name for the base is Edison. The Tazi rezbova system for joining the lampi camp is popular because of the simplicity of the dzharzhach and the reliability of the vrzkat. Sokult e is patented in 1894 by Thomas Edison.
Containment: 1. Design 2. Features 3. Type of lampi 4. In what way do the body illuminators use it?
Design
The E27 base belongs to a group with a threaded base, directed under the format on a cylinder with a coarse thread, which is a screw in the chamber. Marking on the sokla se decipher, somehow as follows:
- E - base on Edison;
- 27 - diameter in millimeters;
The team in the cassette can be directed from metal or ceramics; store the contacts of the plate type with the location in the longitudinal part of the cassette. A single contact on the cartridge e in contact with the central contact on the base, and the second contact (or two) - with a rezbovat often. According to Tozi, he began to carry out a vrzkata from the mrezhat. Normally, the E27 lamp is protected from 220 V, in some cases 110 V and other AC voltages. Ako E27 e is widely distributed in Russia, then in SASC - E26.
The base E27 e is designed specifically for the lamp with a push button back kjm sdzharzhanieto ↑
Features
The standard basis for the lighting of the body, store from 220 V, early in the lamp with a pressurized plug from the bottom and the average power is up to 150 W. other decorative lamps, this little version is based on E14. Tazi marking shows the diameter on the sharp part from 14 mm.Naricha is another minion - for the sake of Malkiy si size. Illuminate the bodies with the base minion usually with low power - up to 60 watts.
Dnes lamp with a hot plug will replace energy-saving and LED products.
Type of lampi
Sockets E27 and E14 are used for lighting in bitovi and industrial premises, both in conventional lamps, cato bras and polyleys, and in explosion-proof minni lamps. From it, lamps are produced from all sorts of popular species, each of which has intended its application at home, in the office and in production.
Lamp with push button
A lamp with a lit zhichka is a classical source for light, which used to be active all the time until the beginning of the 2000s. Osiguryava has a light flux from about 10 lm / W. The E27 base in a lamp with a pressurized plug is different from the main one, usually the power for such a light source is in the range from 25-150 watts. For the sake of the high-rise kat, the consumption of electricity and the heavy heating of the krushkat, in many countries of LN, was abused. Those byaha are replaced from energy-saving lamps.
halogenni
For a halogen lamp, the base of the E27 has not changed into the main one, but it will cross into a linear shape after being used in a spotlight. Such a lamp gives a clear light flux - about 17-20 lm / W. These lamps will wear out for a long time - up to 5000 or more than an hour from the lamp with a hot bug, but they added a lot of popularity in the 12-volt version and in the projector.
Pestene for energy
Grieve old ruins of revenge, compact fluorescent lamps, or something else called energy-dense lamps. Those se warm up a little, consume a little, and in some time they shine 5 five times brightly from a lamp with a lit zhichka. Svetlinen stream 50–70 lm / W.CFL with a power of 20 watts, shine like an old 100 watt lamp. Enter the E27 format for a device with a maximum power of about 25 W, in order of power. According to the principle, it is similar to a fluorescent lamp and in terms of shape it simply wraps around a spiral for compactness.
Compact energy efficient lamp with e27 base
LED
Next 2010, produce for LED lighting of the back and distribute it. The development on LED technology has been brought to the point where LED caps with E27 base are in mass use. The power output for the light source is usually in the range from 4 to 15 watts. And the light flow is from 80 to 120 lm / W. As a result, it begins to comprehend even more savings on energy and brightness. Protected with low voltage (Ima model from 220, and from 12, and 24 V) allowing them to crawl into the humidity of the room.
In what way do the body illuminators use it?
E27 has crawled into the light body. Takiva lampi sa nay-lesni for namirane in sale, somehow yarzhachite for tyah, somehow giving the opportunity to direct the clarification with the minimum financial and go away. Screw these things into polyleys, applications, put down the lamps, set the lamps. The E14 base has been painted on several times across the applique.
Tozi type is razglobjaemaya vrazzvana in production, that part on the lighting body trace becomes interchangeable, and cartridges, especially those with ceramic floors, are subject to repair. An example for this is the mine lighting projectile in the RN, RV and RP versions. Tyakhnata is a special feature that has a broken glass lampshade, which is attached to the body with an iron key, just to protect the metal fence from hitting and damaging. Izpolzvat ce and with clarification to help the premises and all kinds of industries of the enterprise.
For the power of the spotlights and street lighting, this base is used, similar in design, but with a diameter of E40, all kinds of miserable lamps produce from it, such as DNaT, DRL, DRI and others. The power for the light source has reached 1000 and 2000 W.
PredishnaPlinthsOptions for tova as you develop based on the lamp from the plinthNextPlinthsLamps with base g4 and technical specifications