Cause for blinking on a fluorescent lamp and how yes gi we will remove
Title: Luminescent 
fluorescent lamp - source to light from gas discharge. Work on the lampat se osiguryava from an electrical charge, missed the bet. That szdava ultraviolet radiation, sometime turning into white light, is visible behind the human eye, with the help of phosphorus. Properly working lamp from tosi type se including vednaga. Ponyakoga, maybe in a blink of an eye or two five, beforehand, turn it on right away.
Containment: 1. Base the type of fault. 2. Honor causes for malfunction and repair 3. Algorithm for suspension for serious damage. 4. Nai-honor the cause for the malfunction 5. Price for popular models
If your washing machine did not sleep for a moment for a long time when it was turned on or during work, it was marked, farted, a sign of a malfunction on the device or on a separate part. What is the cause? How do I fix it? Let's figure it out.
Base the type of fault.
Before we start with the cause and the consequences, we’ll look at some kind of work on the fluorescent clarification, and then we’ll correctly determine the cause of the damage and start to remove it.
- The lamp is not an instant, but it is not turned on either.
- When the LDS is not turned on, the light does not appear on its own from a single edge on the lamp and the brightness does not increase over time.
- Not a moment, but jumping and brumchi.
- It is known that the trace of the inclusion of the soil and the darkening of the two edges, the name of the exclusion in the filing of the light.
- The blinking fluorescent lamp is switched off.
Honor causes for malfunction and repair
The work on the tosy type of body illuminator depends on many factors. And so the condition is not fulfilled, but the rule is that work on the lamp is always impossible and fluttering on the fluorescent lamp is done. Zapochvayki and disassemble cause for damage to the lamp, si struva and see through the options.
Sorry, the fluorescent lamp is damaged. If the reason for this is the light source itself, then the power supply and replace the lamp with it working correctly and the problem is solved in a better way.
Replaced with a defective lamp
Secondly, damage to the electrical network, sometimes including the LDS. It is possible that there are current shocks, shocks, or bad injections, which will affect the correct operation of the fluorescent light source. Ako nay - probably tryabva yes, reconcile with the pretension, togava preksvaniyata in zahranvaneto can yes be eliminirani. Check the power of the line and the quality of the connection to the contacts on the lighting body itself.
Thirdly, as the temperature in the room is under 10 degrees Celsius, then the lampata can be a moment or generally not light.
Is Siguren si, what is it? Tarsim is another option.
Algorithm for suspension for serious damage.
Whenever you remember and correct the surface of the malfunctions, tryabva and determine what caused it. These are some popular options.
Fluorescent light source not connected
Often the reason for the problems is the usual key with a backlight. It is the one that put the lampata in the mode for work for free practice. Many manufacturers will find information about the work on packaging for lighting bodies: not all damage and all use together with dimers and switches with LED elements.
The flash lamp is known to the time trace is switched on
If your lamp of a moment 1-2 is turned on five times, it means that there is nothing wrong with it. The tosi factor is the norm, not the deviation. Nyama problems. Tova sledzhi on the fact that the installation of the LDS and the electromagnetic system behind the starter. Contrary to the fact that it is fun when the push button is fully turned on for 5-10 seconds, the starter is defective.
Why is the fluorescent lamp blinking, but not shining?
Possibility of a few options: damage to the starter, capacitors, throttles, cartridges or chupvane on the electrode on the lighting rod. If the starter, throttle, cassettes are faulty or if the current is out of defective capacitors, they are just a ripple and will be replaced with a new one. Articulite can and can be purchased in every store for electronics. Can you please post a video with instructions for installing it on the Internet.
Nai-honor the cause for the malfunction
The performance of this type of lighting body depends on many factors. And so every day the condition is not met, then the rule is that work on the lampata is not always possible and all work is done on a fluorescent lamp. Zapochvayki and disassemble cause for damage to the lamp, si struva and see through the options.
Sorry, the fluorescent lamp is damaged. It may even be time to change the lamp when it is not working and the problem is still solved.
Secondly, damage to the electrical network, sometimes including the LDS. It is possible that there are current shocks, shocks, or bad injections, which will affect the correct operation of the fluorescent light source. Ako nai-probably tryabva and behold, reconcile with the current in the current, togava preksvaniyata on the current can and be eliminirani. Check the power of the line and the quality of the connection to the contacts on the lighting body itself.
Thirdly, as the temperature in the flock is under 10 degrees Celsius, togava lampata can be a moment or generally not light.
Illuminated key
Somehow too early, this is often the reason for the faults on the LDS. Please, when the switch is turned on, keep the contacts on the switch off between the blue and the mini light in the switch not working, when it is turned off, light. And how to burn it out, tova means, why did you supply it with electric current. Verigata on the current flow in takawa veriga se from the mrezha, indicator and polyley. Yes, the current is small, but you can also serve as a good charge for the capacitor on the fluorescent lamp. At the moment when the condenser has reached enough for a charge, turn it on, and the light will appear. That se is a discharge and the process of a restarter. The cycle continues, don’t turn it on for a long time.
Incorrectly wired electrical cable
Schematic e is graded correctly connected to a fluorescent lamp - Comrade is undeniably important often. Don’t be afraid to banalize the rules for radiophysics, you can not destroy the LDS itself, but also harm yourself and others. Ima different schemes for svyarzvane, but the principle is shared by them is simple. When something is stored, it is connected to the starter, it is discharged and the electrode is closed, a trace of some current in the voltage on the electrode and the starter is limited from the resistance to the throttle - the current in the lampate is increased, the electrode is heated. In a short time, the bimetal contacts on the starter will cool down and cool off the decoction. In a short time, the throttle is all the time, thanks to self-induction, by creating an impulse with a high voltage, which leads to a discharge in a gaseous medium and a lamp of light.After that, the voltage at the top will still be equal to half of the intermediate voltage, which is still quite enough for reheating on the starter of the electrode. Whenever the lamp is turned on, the starter is no more and participation in the scheme for work, do not turn on the contact and still stop the opening.
Ako is the reason for the malfunction, in an incorrectly fenced circuit on the cable, togava all the parts on the verigata tryabva and be completely shattered. Podredete gi in the correct ed. Trial work on a lampat.
Do not take away, for and repairing equipment, depending on the electrical network, the operation and mate is determined by the set of radio engineering knowledge. Have such a tryabva and have a special tool for yourself: a multiset, a soldering iron, a screwdriver set, spare parts for the device, etc.
Price for popular models
PredishnaLuminescent lamps Protect fluorescent lamps from burning out and how to fix itNextLuminescent